Tanks & Accessories

Drag Specialties - Fat Bob-Style Five-Gallon Gas Tank fits '48-'84 FX/ FL & Custom Frames to '84 Models Features Fat Bob-style tanks accept stock dash, speedo equipment and standard late-model (22mm) Harley petcocks Gas caps sold...

Drag Specialties - Fat Bob-Style Flatside Gas Tank fits '84-'99 FXST/​FLST, '85-'86 FX/​FXWG Models - 6 Gallon Features: Distinctive reproduction gas tanks constructed of drawn steel Use with '84-E'96 screw-in caps (sold separately) Stock dash may...

Drag Specialties - Fat Bob-Style Gas Tank fits '48-'84 FX/FL Models & Custom Frames to '84 Models (Repl. OEM # 61213-83/ 61229-83) - 5 Gallon Features: Fat Bob-style tanks accept stock dash, speedo equipment and standard late-model (22mm) Harley...

Drag Specialties - Fat Bob-Style Flatside Gas Tank '84-'99 FXST/​FLST, '85-'86 FX/​FXWG Models (Repl. OEM #61218-85/ 61426-85) - 3.5 Gallon Features: Distinctive reproduction gas tanks constructed of drawn steel Use with '84-E'96 screw-in caps (sold...

Drag Specialties - Fat Bob-Style Flatside Gas Tank fits '84-'99 FXST/​FLST, '85-'86 FX/​FXWG Models (Repl. OEM #61211-84A/ 61228-84) - 5 Gallon Features: Distinctive reproduction gas tanks constructed of drawn steel Use with '84-E'96 screw-in caps...

Drag Specialties - Extended Dash-Style Rubber-Mount Quickbob® Tank Kit fits '86-'94 Sportster Models The Drag Specialties Extended Dash-Style Rubber-Mount Quickbob® Tank Kit is designed for '86-'94 Sportster Models. This comprehensive kit...

Drag Specialties - One-Piece 2" Extended Gas Tank W/ Dual Screw-In Caps fits '84-'00 FXR Models Features: 2" Stretch over stock length; capacity is approximately 4.2 gallons Comes complete with all necessary mounting hardware Gas tanks are fully...

Drag Specialties - Extended Smooth-Top QuickBob® Rubber-Mount Single-Cap Style Gas Tank fits '82-'03 Sportster Models The extended design of this tank permits the tank's lines to flow into the seat's line for an incredible look. It has a rear-end...

Colony - Gas Tank Mounting Hardware Kit fits '91-'99 Softail Models Features Custom chrome-plated mounting kits Made in the U.S.A.

V-Twin 6" Fuel Sight Tub This is a 6" long fuel sight tube unit. It must have steel dowels welded into place prior to tank surface finishing. Fitment Fits all models.

All Balls Racing - Fuel Pump Rebuild Kit fits '95-'99 Touring Models All Balls' Fuel Pump Rebuild Kits come complete with all the required pump, filter, hose (s), clamp (s) and wiring harness as needed per model. They also come with the needed parts to...

All Balls Racing - Fuel Pump Rebuild Kit fits '00-'03 Touring & '01-'03 Softail Models (Short Pump/2.60") All Balls' Fuel Pump Rebuild Kits come complete with all the required pump, filter, hose (s), clamp (s) and wiring harness as needed per model...

All Balls Racing - Fuel Pump Rebuild Kits fits '04-'07 Touring & '04-'07 Softail Models (Long Pump/ 3.00") All Balls' Fuel Pump Rebuild Kits come complete with all the required pump, filter, hose (s), clamp (s) and wiring harness as needed per model...

Motion Pro - Straight Outlet Fuel Valve 1/4" NPT Features Feature 1/4" NPT pipe thread on one end and a 1/4" barb on the other Rugged steel construction with zinc plating Viton O-ring stands up to most commonly used fuels

Drag Specialties - 2.25 Gallon Rubber-Mount Gas Tank fits '95-'03 Sportster Models NOTE: When this gas tank is installed on 92 and later models and the Original Equipment continuous venting system is eliminated or disconnected, you may not reuse your...

Drag Specialties - Right-Side Petcock 3.3 Gallon High Tunnel Gas Tank W/ Chrome Aero-Style Gas Cap  This rubber-mounted bolt-on style flat-bottom tank features a "high-tunnel" design which adds fuel capacity without looking tall. It comes with a...

Drag Specialties - Left-Side Petcock 3.3 Gallon High Tunnel Gas Tank W/ Chrome Aero-Style Gas Cap  This rubber-mounted bolt-on style flat-bottom tank features a "high-tunnel" design which adds fuel capacity without looking tall. It comes with a...

Drag Specialties - Legacy 3 Gallon Gas Tank fits '07-'20 Sportster Models Repl. OEM #61405-07  The legacy gas tank features a one-of-a-kind, functional style that will give your bike a great custom look. It is pressure-tested and comes with a stock...

Drag Specialties Oil Tank for Harley Sportsters This Oil Tank by Drag is available in a chrome or gloss black finish. Features: OEM-style oil tanks Includes filler cap Holds approximately 3 quarts Fitment: 1986 -...

Drag Specialties Oil Tank for Harley Sportsters This Oil Tank by Drag is a duplicate of the original equipment and is available in a chrome finish. Features: A duplicate of the original equipment black oil tank Includes filler cap Approximately 3...

Colony Filler/Clutch Plug fits '77-'85 XL The Colony filler/clutch plug is a chrome cap for transmission filler/clutch adjustment holes on non-vented Sportster primary covers. This plug has a hex style head and was made right here in the U.S.A. This is a...

Colony Clutch Adjusting Hole Cap fits '71-'76 XL The Colony Clutch Adjusting Hole Cap is available in a natural aluminum finish. Swap out your OEM cap with a Colony one knowing you're using a part from a company known for quality. Features: Natural...

DK Custom Products - 2" Billet Tank Lift Kit W/ Powder Coat Finish fits '04 & Up Sportster Models Features Made from 6061 billet aluminum All stainless steel hardware E-Z Bolt-On install - does not require the removal of tank Instruction Sheet...

Drag Specialties - Gloss Black Screw-In Gas Cap W/ Vent fits 99-24 Big Twin, L'96-'22 XL (Exc. FLHT/​FLTR, RH Sportster) Features Feature a provision for evaporative emissions control equipment Fitment 2020 Harley-Davidson Road Glide...

DK Custom Products - 2" Billet Tank Lift Kit W/ Powder Coat Finish fits '10-'17 Dyna Models Features Made from 6061 billet aluminum All stainless steel hardware E-Z Bolt-On install - does not require the removal of tank Instruction Sheet...

Drag Specialties Chrome Screw-In Gas Cap for '84- E'96 Harley Model The Drag Specialties Screw-In Gas Cap is available in a chrome finish. Features: Feature a provision for evaporative emissions control equipment Sold...

Gasbox Frisco Style Gas Tank Lift Kit fits 1986 to 2003 Harley Sportster Models The Gasbox Frisco Style Gas Tank Lift Kit willl raise the front end of your tank several inches giving you that Frisco look. Kit raises the front of the tank several...

V-Twin Harley Sifton Hex Petcock 3/8" NPT - Chrome Chrome hex petcock has 90° right hand spigot and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot. Designs are made for a seated position on the...

DK Custom Products - 2" Billet Tank Lift Kit W/ Powder Coat Finish fits '99-'17 Softail Models Features Made from 6061 billet aluminum All stainless steel hardware E-Z Bolt-On install - does not require the removal of tank Instruction Sheet...

Drag Specialties - 22MM Forward-Facing Spigot Fuel Petcock - Chrome This Forward-Facing Spigot Fuel Petcock features all the necessary components for a quick and easy installation on your bike. Comes in a bright, chrome finish. Features Includes...

DK Custom Products - 3" Billet Tank Lift Kit W/ Powder Coat Finish fits '04 & Up Sportster Models Features Made from 6061 billet aluminum All stainless steel hardware E-Z Bolt-On install - does not require the removal of tank Instruction Sheet...

DK Custom Products - 1" Billet Tank Lift Kit W/ Powder Coat Finish fits '04 & Up Sportster Models Features Made from 6061 billet aluminum All stainless steel hardware E-Z Bolt-On install - does not require the removal of tank Instruction Sheet...

Drag Specialties - 22MM Rear-Facing Spigot Fuel Petcock - Gloss Black This Rear-Facing Spigot Fuel Petcock features all the necessary components for a quick and easy installation on your bike. Comes in a smooth, gloss black finish. Features Includes...

DK Custom Products - 1" Billet Tank Lift Kit W/ Powder Coat Finish fits '99-'17 Softail Models Features Made from 6061 billet aluminum All stainless steel hardware E-Z Bolt-On install - does not require the removal of tank Instruction Sheet...

DK Custom Products - 1" Billet Tank Lift Kit W/ Powder Coat Finish fits '99 & Up Touring Models Features Made from 6061 billet aluminum All stainless steel hardware E-Z Bolt-On install - does not require the removal of tank Instruction Sheet...

Drag Specialties - Straight Fuel Outlet 1/4" NPT Petcock - Chrome The Drag Specialties Straight Fuel Outlet 1/4" NPT Petcock is a fully-equipped fixture that will work on any ride. Comes to you in a bright, chrome finish. Features Features a...

This is a front bottom mount for 4-speed frames with Fat Bob Tanks.

V-Twin Sportster Style Tank 2.4 Gallon Gas - Frisco Strap Mounts This V-Twin Sportster style tank with frisco strap mounts has a left side petcock opening, and a fuel capacity of 2.4 gallons. It features a four bolt mount strap system to be welded onto...

Drag Specialties - 22MM Forward-Facing Spigot Fuel Petcock - Gloss Black This Forward-Facing Spigot Fuel Petcock features all the necessary components for a quick and easy installation on your bike. Comes in a smooth, gloss black finish...

Drag Specialties - 22MM Straight Spigot Fuel Petcock - Gloss Black This Straight Spigot Fuel Petcock features all the necessary components for a quick and easy installation on your bike. Comes in a smooth, gloss black finish. Features Includes...