Paughco Exhaust

The Paughco Fishtail Tip: Takes minutes to install and will give your bike a retro look Fits 1-3/4 in. exhaust pipes Made in USA

The Paughco STD Exhaust Flange Fits STD Panhead cylinder heads

Paughco - Fishtail Extension  Features For Universal applications that will slip over any 1 3/4"-diameter headpipe Available in 18" and 31" long and 31" long upswept Sold each

Paughco Straight End Exhaust for Harley Sportster '86-'03 This is a chrome upsweep drag pipe set for Harley XL models. Package includes brackets and tabs. Fitment: Harley-Davidson XL Models 1986-2003

Paughco 1-3/4" Drag Pipes for Harley-Davidson 1970-1984 FL Models with Kick or Electric Starter Required brackets and optional heat shields: 1861-1043 - Hanger bracket required for 40" pipes 1861-1046 - Mounting clamp required for 34"...

Paughco Straight-End Exhaust for Harley Sportster '57-'85 This exhaust is a chrome straight end drag pipe set with an inner diameter of 1-3/4". The package comes with brackets and tabs. Please note that this exhaust kit does NOT fit 1979 XL Models!...

Paughco 1 3/4" Drag Pipes for Harley Sportster The Paughco Drag Pipes are sleek looking and super easy to mount. All hardware is included and they'll mount right on to your OEM Bracket, even a novice could mount these to their motorcycle. The Paughco...

Paughco - 22" Tapered Muffler 2½"-diameter mufflers for universal applications that will slip over any 1¾"-diameter headpipe. These mufflers have a slider channel on their backsides, and feature all-steel internal baffles. Sold each...

Paughco Hanger Bracket Hanger bracket used for the Paughco 1-3/4" Drag Pipe for FL Models exhaust systems.

Paughco Bell Tip Mufflers (Sold Each) The Paughco Bell Tip Mufflers are available in 20" and 22"

Paughco Slash Cut Exhaust for Harley Sportster 1986-2003 This is a chrome upsweep drag pipe set for Harley XL models. Package comes with slash end exhaust pipes. Fitment: Harley-Davidson XL Models 1986-2003

Paughco Slash Cut Exhaust for Sportster 1957-1985 Note that these pipes do NOT fit 1979 XL Models. Chrome shot gun drag exhaust pipe set has a diameter of 1-3/4". Set has slash cut ends and fits rigid frames only. Requires bracket for mounting...

Paughco 1-3/4" Mounting Clamp Mounting clamp required to install 1800-1867 (Paughco 1-3/4" Drag Pipes for FL Models, 34" pipes).

Paughco Drag Pipes Fits Harley 70-84 FX Models w/ Swingarm Frame Required brackets and optional heat shields: 1860-0233 - Required hanger bracket DS-209923 - Muffler Support, right side, chrome 1861-1039 - Front heat shield 1861-1038 - Rear heat...

Paughco Floorboard Adapter for FL Drag Pipes This floorboard adapter is made to be used with the Paughco 1-3/4" Drag Pipes for FL Models (DBC-2619).

Paughco Slash Cut Exhaust Pipes for Sportster 1979 Chrome drag pipe set has a diameter of 1-3/4" and comes with channel mounts. Pipe set will not fit kick-start models. Fits: Harley-Davidson XL Models 1979 only

Paughco Staggered Drag Pipes for Harley Models 1966-2013 Chrome staggered 2 into 2 exhaust measures 40" in length. Fitment: Drag pipes are available for the following model years: Harley Davidson FL models 1966-1969 Harley Davidson FL models...

Paughco Hanger Bracket for Exhaust Pipes Hanger bracket by Paughco used for installing Part #s: 1800-1870, 1800-1871, 1800-1872.  

Paughco Hanger Bracket for Front Pipe Hanger bracket used for various Paughco exhaust systems.

Drag Specialties - Heavy-Duty Inner Fairing Support Brackets Features Made with thick 13 gauge steel for increased strength Zinc-plated for superior rust resistance Ideal for use on bikes with upgraded speakers and/or amps    

Paughco 1-3/4" Drag Pipes Fits Harley-Davidson 57-78, 80-85 XL Models Hanger bracket is required for installation, not included in package. Refer to part list below for additional accessories. Required parts and optional parts: 1861-1047 - Brake pedal...

Paughco - 1¾" 2-Into-1 Headpipes fits '70-'84 FLH Models (Electric Start Only; No Heat Shields) Paughco recommends finishing off your exhaust system by pairing these headpipes with tailpipe extensions or universal mufflers. These headpipes are...

The Paughco Fishtail Muffler: 2-1/2" Fishtail Universal application that will slip over any 1-3/4" diameter headpipe Sold Each

Paughco Hanger Bracket for Rear Pipe Hanger bracket used for various Paughco exhaust systems.

Paughco 1-3/4" Drag Pipes For Late 1985-2009 Harley Touring Models Slash-cut drag pipes by Paughco made right here in the USA! Pipes are 40" long and feature a chrome finish. Features: Pipes feature a bright chrome finish 40" slash-cut drag pipes...

Paughco "Build Your Own Pipe" Kit: Everything you need to fabricate a 1-3/4" diameter custom exhaust system Made in USA Includes: two 24 in. straight pies, two 15 in. 30 degrees bend pipes, two 3 in. sliders, six 1-5/8 in. OD sleeves and two 12 in...

Paughco 1-3/4" Muffler Pipes Fits Harley-Davidson 1970-1984 FL Models with Electric Start These muffler pipes by Paughco measure 38" in length, 1-3/4" in diameter. The pipes are available with a slash-cut end or a tapered end. Heat shields are...

Paughco 1-3/4" Muffler Pipes Fits Harley-Davidson 1970-1984 FX Models with Swingarm Frame These muffler pipes by Paughco measure 38" in length, 1-3/4" in diameter. The pipes are available with a slash-cut end or a tapered end. Heat shields, hanger...

Paughco - 1-3/4" Slash-Cut Drag Pipes - Fits Harley-Davidson 82-83 FXR Models These pipes by Paughco measure 40" in length, 1-3/4" diameter. A separate front heat shield is available under part number 1861-1039. Features: Specially designed for...

Paughco Custom Universal Mufflers - 17" Tapered 2½"-diameter mufflers for universal applications that will slip over any 1¾"-diameter headpipe. These mufflers have a slider channel on their backsides, and feature all-steel internal baffles...

Paughco Front Heat Shield This heat shield is made for use with various Paughco brand exhaust systems. Fitment: YearMakeModel 1979 - 1980 Harley-Davidson 1200 Fat Bob - FXEF 1977 - 1979 Harley-Davidson 1200 Low Rider - FXS 1971 - 1978...

Paughco Muffler Support Bracket Fits Harley 58-84 FX, FL Models This muffler support bracket is a direct replacement for stock support bracket. Features: Heavy-duty, heli-arc constructed supports Chrome right side support is direct replacement for stock...

Paughco Rear Heat Shield This heat shield is made for use with various Paughco brand exhaust systems.

Paughco Rear Heat Shield for Drag Pipes (DBC-2620) This heat shield is made for use with the Paughco Drag Pipes Fits Harley 70-84 FX Models w/ Swingarm Frame (DBC-2620).

Paughco Rear Heat Shield This heat shield is made for use with the Paughco 1-3/4" Drag Pipes for FL Models (DBC-2619)

Paughco Front Heat Shield This heat shield is made for use with various Paughco brand exhaust systems.