Yamaha XS 650 Parts

V-Twin Rear Fender Brace Set for Rigid - Chrome Mount brace set allows any width fender to be bolted to these bars. Fender brace is for rigid frames. Features:   Set of two Braces are 9-1/2" long chrome finish Mount holes measure 5/16" in...

Motorcycle Supply Co. - Bezel 5" Chrome Headlight - Amber Lens This headlight has a 5" bezel, chrome housing and clear lens. Specs: Chrome Housing. 3 Wire High/ Low Beam Fitment: Custom Applications

Motorcycle Supply Co Unity 5" Copper Headlight This chopper/bobber headlight will add a unique custom look to your bike. Specs: Copper Housing. 3 Wire High/ Low Beam. 5" Wide, 4" Deep. Fitment: Custom Applications

V-twin large, thin, tuck and roll style solo seat features black vinyl covering on a steel base plate. Measurements Length: 13" Width: 14" Thickness: 6 cm  Fits: Custom application

The EMGO Ape Hanger Handlebars are high quality carbon steel bars. Width 32" Rise 14" Pullback 7 1/2" Center Width 5 1/2"

V-Twin 4" Headlight - Chrome w/ Clear Lens Features: Chrome 4" bottom mount deco headlamp features a longer tapered shell with a 12 volt 60/55 watt H-4 bulb. Includes mount block and stud. Headlamp does not have a hi-beam indicator...

V-Twin Fat Bob Steel Rear Fender - Right Side Chain Relief Bobbed rear fender for rigid models has a raw finish with a right side relief for the chain (right side of the bike while on the bike facing handlebars). Measurements: 7-1/4" wide and 5-1/5"...

Biltwell Slimline Black Tuck N Roll Solo Seat Fitment: This is a custom motorcycle component that requires basic fabrication skills and mechanical acumen to install properly. If your motorcycle already has a seat hinge and spring bungs installed on the...

Motorcycle Supply Co. - Black 5-¾" Headlight - Amber Lens This Motorcycle Supply Co. headlight is a Bates style headlamp designed for use on motorcycles. It has a black housing and an amber lens, and it uses a 12V H4 bulb. The headlight has a...

Motorcycle Supply Co. Finned 4" Headlight Black with Clear Lens This headlight is 4" with a black housing and clear lens. Specs: Black Housing. 3 Wire High/ Low Beam Fitment: Custom Applications

The EMGO Scrambles handlebars are great for racing or street trackers. There made from carbon steel and available in Chrome or Gloss Black. Measurements: End Rise: 4.5" Width: 31.75" Center Width: 5.25" Pullback: 5.75"

V-Twin LED Tail Light - Chrome w/ Smoked Lens Features: LED round tail lamp is chrome with smoked lens includes a 2 bolt adjustable base mount. Tail lamp measures 2-1/4" in diameter and 2.204" long.  Does not have license plate light...

EMGO Drag Handlebar 7/8" These Bars are a high quality carbon steel handlebar. Measurements: Width 27 1/2" Pullback 3 1/2" Center width 5"

EMGO Turnout Style Muffler Chrome The Turnout Style Muffler by Emgo is used to redirect exhaust. Made from quality material, this slash cut muffler will have everyone asking where you got it. Features: 19" length will fit either 13/4" or 11/2"...

The Todd's Cycle Bar End Shooter Mirrors Features: CNC-machined billet aluminum with stainless steel hardware 21/2" diameter Gooden-Tite® bushing mounting system to reduce vibration Fully adjustable Will fit most handlebars and clip-ons with...

V-Twin Round Rear Fender - 6" Features: Round profile chopper/ bobber raw fender is 6" wide and ribbed type with center bead. Made from .032" thick steel Specs: Length Tip to Tip: 27-1/2" Width: 6" Thickness: .9mm

V-Twin Saga Gas Tank 3 Gallon - Bung Style Features: right side petcock opening. dished teardrop pop out sides fuel capacity of 3.0 gallons. uses a bung style cap which is not included. End to end of mounting tabs measures...

Biltwell Zed Handlebars 7/8" These bars look awesome on HD Street 750's, Japanese Bobbers, and British Choppers. 1" O.D. x 0.120" wall seamless 4130 chromoly tubing All bends are created with internal mandrels on a CNC bender to reduce flat spots in...

The Emgo GT Grips have a old-school look with some extra comfort For 7/8" bars 5 1/4" in length Sold in Pairs

The Emgo Jack Hammer Grips can go on any style bars. They have a classic look featuring ribs along the length of the grip. For 7/8 bars Sold in Pairs

K&S Technology Inc. Round Marker Lights Black Satin K&S Technology Inc. is known for their distinctive style in motorcycle lighting. These turn signals are available in single or dual filament bulbs. If you're looking to make your marker lights...

V-Twin Sparto Tail Light 12V - Chrome This is a Chrome die cast Sparto lamp with gasket for fender mounting. Fitment: Custom application

V-Twin Steel Rear Fender 6" Round Profile - Raw Smooth round profile chopper fender has a thickness of 1.05 mm. Fits: Custom application

 All Balls Racing Rear Wheel Bearing Kit fits: Yamaha XS650 '70-'83 Features: High-speed bearings are manufactured to ABEC 3 precision levels Triple-lip rubber seals keep the grease in and the water and dirt out Chevron SRI 2 grease contains rust...

Biltwell Tracker Handlebars 7/8" The tracker bars look great on dirt-track inspired bikes, Street 750's, and vintage Brit motorcycles Features: These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 chromoly tubes...

The EMGO Daytona Handlebars are high quality carbon steel bars. Desinged for comfortable riding position Width 29" Rise 4" Center width 4.5" Pullback 6.5"

The EMGO Euro Handlebars are high quality carbon steel bars. Sport style design. Width 29.5" Rise 2" Center width 4.5" Pullback 5.5"

The EMGO Skinny Scrambles handlebars are great for racing or street trackers. There made from carbon steel and available in Chrome or Gloss Black. Measurements: End Rise: 5" Width: 25" Center Width: 4" Pullback: 4.5"

Magnum BYO Universal Brake Lines Banjo Fitting Vise Wrench The Magnum Build Your Own Universal Brake lines are designed for the "do-it-yourself-er." These are made from tough and durable stainless steel which means they were built to last. So if you...

Motorcycle Supply Co. Unity Style 5" Matte Black Headlight - Clear Lens Specs: Matte Black Housing. 3 Wire High/ Low Beam. 5" Wide, 4" Deep. Fitment: Custom Applications

Biltwell Slimline Smooth Solo Seat The Biltwell Slimline Solo Seat is the perfect no-frills solo seat for your custom motorcycle. It does require basic fabrication skills to install, as it will require a seat hindge, seat springs, and mounting bungs to...

Biltwell Solo 2 Seat - Tuck n' Roll Features: 1/8" thick stamped steel pan with welded carriage bolts on nose and tail for spring and hinge mounting Stamped-in ridges on the pan increase stiffness and give the pan a clean, classic look with a matte...

EMGO Bell-End Megaphone Mufflers Chrome Emgo developed these Bell-End Megaphone mufflers that will catch everyone's eyes. This retro style muffler looks great and as always, is made from quality material. Available in standard or upswept, so choose...

K&S Technology Inc. Small Marker Lights Round Black Satin K&S Technology Inc. is known for their distinctive style in motorcycle lighting. These turn signals are available in single or dual filament bulbs. If you're looking to make your marker...

Motorcycle Supply Co. - Chrome 5-¾" Headlight - Amber Lens This Motorcycle Supply Co. headlight is a Bates style headlamp designed for use on motorcycles. It has a chrome housing and an amber lens, and it uses a 12V H4 bulb. The headlight has a...

Biltwell Frisco Handlebars 7/8" These bars are taller than stock bars and look great on XS650's, Triumphs, and almost all stripped-down choppers with a narrow profile. Features: These handlebars are constructed with seamless CNC mandrel bent 0...

Biltwell Moto Bars - 7/8" These bars are perfect for a vintage motocross or dirt-track inspired motorcycle. Features: These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 chromoly tubes. Precision mitering and TIG...