1981

S&S Cycle - Oil Pump Replacement Gasket Kit fits '36-'69 Big Twin Models Features: Made in the U.S.A. Fitment 1991 Harley-Davidson Dyna Sturgis FXDB - - 1990-1991 Harley-Davidson Low Rider Convertible...

Colony - 8703-2 Relief Valve Plug Kit fits '81-'84 Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Colony - 8476-4 Cap Nut Dash Mounting Hardware Kit fits '77-'85 FX Model Features: Chrome plated dash mounting button allen kit Made in the USA Fitment 1983-1985 Harley-Davidson Low Rider...

V-Twin - 3/8 NPT-22MM Petcock Nut fits '86-'17 FLST/FXST, '75-'95 Sportster Models (OEM #622-83N) Brass 1/4 NPT-22MM petcock nut only Fitment: FX 1975-1984 FL 1975-1984 FXR 1982-1994 FXD 1991-2017 XL 1975-1995 FLST 1986-2017 FXST 1984-2017

V-Twin - Mid Control Shifter Shaft fits '89-Up FXST/FLST, '81-Up Sportster Models Softail mid control shifter shaft is the cross over type, used to route over inner primary to connect to shifter linkage. For mid shifter control. Shaft has splined...

V-Twin - AEE Foot Shifter Kit fits '79-'84 FX/FL, '86-'99 FXST/FLST Models AEE foot shifter kit for 1 up 3 down shifting. Includes threaded rod with 5/16"x24 threads on each end. Shorty control set, pedal requires less reach than originals! Fitment:...

V-Twin - Oil Pump Pressure Valve Stainless Steel fits '82-'91 FXR, '86-'91 FLST, '84-'91 FXST Models Machined stainless steel oil pump pressure valve for Big Twins. Fits oil pressure relief valve port on oil pumps. Used as an oil pressure indicator...

Colony - Inner Primary Mount Kit fits '80-'85 Big Twin 4-Speed Models (OEM #16830-54, 4021, 4722) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A...

Colony - Fork Drain Screws fits '84-'99 FXST/​FLST, '84-'98 FLT/​FLHT/​FLHR/​FLTR, '84-'86 FXWG Models (OEM #45858-77) Features: Two button head Allen screws with two copper compression washers Made in the U.S.A...

Colony - Motor Case Kit fits '79-'95 Big Twin Models - Cadmium Features: Contain all necessary hardware to bolt together stock motor cases Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Colony - Fork Stem Nut Cap for '80-'11 Wide Glide (OEM #45670-80) Features: Made in the U.S.A. Fitment 2013 Harley-Davidson Breakout FXSB - - 2012-2013 Harley-Davidson Softail Slim...

Colony - Stem Nut and Lock Washer Kit fits '99-'13 Touring, '00-'10 Softail & '06-'17 Dyna Models (OEM #45717-63, 45718-60) Features: Precision-machined stock stem nut and stamped steel lock washer For models without steering damper Made in the...

Colony - Transmission Kicker Cover Stud Kit fits '36-'84 Big Twin Models (OEM #24818-52, 33298-36) Features: Heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - Cam Cover Acorn Hardware Kit fits '70-'99 Big Twin Models (Except Twin Cam) Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Colony - 8707-6 Oil Pump Plug Kit fits '81-'84 Big Twin Models Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Drag Specialties - 30" Black Vinyl Throttle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Drag Specialties - 30" Black Vinyl Idle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for...

Drag Specialties - 55-7/16" Black Vinyl High-Efficiency Clutch Cable fits '80-'82 FLT/ FLTC Models - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for smooth...

Drag Specialties - 54" Black Vinyl High-Efficiency Clutch Cable fits '68-'86 Big Twin Models (4-Speed) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for...

Wild 1 - Chubby® Savage 1-¼" Handlebars - Black These handlebars from Wild 1 are 1-1/4" in diameter, they are also 1-1/4" at the clamp and will need to be ran with 1-1/4" risers, such as the ones offered by Wild 1. Features Handlebars are...

Features: Billet 6061 aluminum Drilled with 1/2" hole for internal wiring Works with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Base hole tapped for standard 1/2-13 mounting bolts (bolts not included) Fits...

The H2 Bars look good on everything!  Features 1-inch O.D. x 0.120 wall seamless 4130 chromoly tubing with precision mitered and TIG welded joints. Threaded bungs on vertical uprights are CNC-machined chromoly steel with1/2-13 t.p.i. holes to...

Thrashin Supply Co. - Aggressor Foot Pegs Features: Designed to provide the maximum amount of grip and improve ground clearance while maintaining a sleek and timeless design Twelve replaceable cone-shaped stainless steel cleats per footpeg Cutaway...

James Gasket - 5th Gear Clutch Side Mainshaft Seal fits '80-'E84 Big Twin 5-Speed Models (OEM #12044, 12044A) Features: Made in the U.S.A. Fitment 1984 Harley-Davidson Low Glide FXRS - Notes: 1984Fits to Early '84...

James Gasket - Primary Gasket fits '65-'84 FL/FLH/FX/FXE/FXWG Models (Gaskets, Seals and O-Rings) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Gasket fits '65-'84 FL/FLH/FX/FXE/FXWG Models Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the USA Note: Seals not...

James Gasket - 9 Hole Rigid Mount Foamet® Primary Cover Gasket fits '65-'88 Big Twin Models (OEM #60538-81, 60538-81A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone...

James Gasket - Primary Gasket Kit fits '84-'86 Touring & '84-'88 Softail Models w/ Silicone Bead Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

Jims - 768 5-Speed Transmission Case Shifter Shaft Seal Installer fits '80-'99 Big Twin, '99 Twin Cam, '99-'06 FXST & '99-'05 FLT/F LHT/​FXD Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and...

Jims - 976 Engine Rotator Tool fits '55-'06 Big Twin Models (Except '06 Dyna Glide) Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and...

Jims - 1664 5-Speed Transmission Shifter Shaft Sleeve Tool fits '80-'83 FLT/​FLHT/​FXR, '84-'99 Big Twins & '84-'00 FLHT/​FXR/​FXD Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use...

Jims - 2244 3/8" 35 mm Fork Nut Socket fits For Big Twin & Sportster Models Features: Used to remove and install top fork nuts on fork tubes Rubber protector inside socket Will clear most handlebars Made in the U.S.A...

Jims - 2240 Head Holder Guide Tool '48-'04 Big Twin, '57-'03 Sportster & Some SE CVO Twin Cam Models (5/16” Valve Guides) Features: Adapters are supported by a stand that makes it easy to press valve guides in and out A special guide...

Jims - 1110 0.105" Camshaft Pinon Gauge Pins fits '54-'89 Big Twin Models Features: Use to check pinion gear for pitch diameters Check service manual for sizing chart Made in the U.S.A. Fitment 1989 Harley-Davidson Electra Glide Ultra...

FLHRS Jims - 2043 41mm Fork Nut Socket fits '48-'17 Wide Glide Models Features: Eliminates possible burring of plug caused by wrenches Used to remove and install top fork-tube plug Fits 41 mm forks Made in the U.S.A...

Jims - 1034 Sprocket Shaft Holder fits '55-'99 Big Twin & '99-'06 Twin Cam (Except '06 Dyna) Features: Used to hold flywheel assembly in vise, with or without left case attached Made in the U.S.A...

Jims - 95760-57 Bushing Bearing Puller fits '66-'17 Big Twin (Except M-Eight), '57-'22 Sportster & Buell Models (Except 1125R) Features: Used to remove rocker bushing or bearing in one easy operation Made in the U.S.A...

Jims - 1710 Outer Race Snap Ring fits '69-'02 Big Twin Models Features: Used for removing and installing the Timken® bearing outer race snap ring A must for replacing rings in OEM and aftermarket cases Made in the U.S.A...

Jims - 33443-84 Tappet Aligning Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Can also be used to align rocker box bases on Evolution head (requires two tools) Also used in Harley-Davidson® Twin Cam oil pump alignment...

Jims - 1745 Bearing Simulator fits '70-'02 Big Twin Models Features: Designed to allow quick and easy removal and replacement of flywheel assembly in the left-side crankcase when checking rod-to-case, piston-to-flywheel or cylinder-to-flywheel...