Lighting

Drag Specialties LED Handlebar Marker Lights Mount these LED Handlebar Marker Lights by Drag on your Softail or Dyna for a low profile look. Available in Chrome or Black w/ amber or smoke lenses. Please Note: On newer Harley Davidson models a 2 to 3...

These turn signal wire adapters by Motorcycle Supply Co. make using aftermarket turn signals or maker lights easy! To verify proper fitment, compare MC Supply connector photos to OEM connector Features: Eliminates the need to cut and splice wiring...

Cycle Visions - Black Curved Slick Signal License Plate Frame and Mount - fits '13-'17 FXDB & '15-'17 FXDLS This License Plate Frame and Mount by Cycle Visions is available in black or chrome. It has a built in LED run, turn, and brake lights...

Custom Dynamics - 2 to 3 Wire Harley Turn Signal Converter Looking to convert a 2 wire front turn signal to work on a 3 wire setup? This is the part you will need on newer Harley Davidson models when aftermarket turn signals are installed and front OEM...

The Custom Dynamic All-in-one License Plate Frame will light up your license plate, work as turn signals, and as a brake light. Please Note: On bikes with original dual function turn/ brake rear turn signals if the two side lights on the plate light up...

Drag Specialties - Turn Signal Fork Clamps For a cleaner look use the Drag Turn Signal Fork Clamps to mount your signals on the front fork tubes. Available in Black or Chrome for 39mm, 41mm, and 49mm. Features: Die-cast construction For mounting...

Motorcycle Supply Co. - Black 5.75" Night Stalker LED Headlight This Motorcycle Supply Co. Black 5.75" Bulb is perfect for converting your Harley Sportster or Dyna standard bulb over to LED. Fitment: Harley Davidson Dyna & Sportster models with 5...

Motorcycle Supply Co. - Blackout LED Laydown Harley Taillight The Blackout LED laydown tail light from Motorcycle Supply Co. features super bright LED's and a darker lens than most LED Taillights on the market today. The tail light is now plug-n-play...

Drag Specialties - Turn Signal Swivel Kit These Turn Signal Swivel Kits by Drag Specialties are made from CNC-machined steel and replace the stock zinc swivel. Features: Available in chrome or black Swivels are CNC-machined steel Replaces stock...

Custom Dynamics Mini LED Light Strip These are great for adding some light just about anywhere on your motorcycle. The red lens are good for adding an extra brake light, the amber lens works great as a turn signal, and the white for license plate...

Memphis Shades Headlight Extension Block for Dynas This extension block is a perfect solution to moving your headlight forward in your fairing. Features: Moves headlight forward in fairing bezels of Gauntlet and Cafe fairings (6 positions: 1.3" to 2.6")...

Memphis Shades Adjustable Fork Clamps for 35-45MM Forks The Memphis Shades Fork Clamps are adjustable so you can make them fit just about any motorcycle with 35-45MM front forks. These are made from tough material and are chrome plated making them not...

Drag Specialties DOT Compliant Turn Signals These die-cast, chrome plated use stock Deuce-style replacement lenses. The front signals use solid 5/16" bolt and separate wire exit, and the rear signals mount with 5/16" hollow bolt and hidden wiring...

V-Twin Bullet Tail Light Marker Light - Black with Red Lens These black bullet tail light markers by V-Twin are made from durable steel and are versatile. They can be used as a running and brake light or a market light. It has a threaded post and nut...

Kodlin - 3-in-1 Mini Fender Strut Turn Signals Don't let their small size fool you; Kodlin's new 3-in-1 Mini Fender Strut Turn Signals pack an overwhelming amount of LED power! These signals are equipped with three different indicators: Run-Turn-Brake...

'Til Death Cycles - Turn Signal Block Off Kit fits M8 Softail Models If your M8 Softail could use an update, 'Til Death Cycles' Turn Signal Block Off Kit is just what you need. 'Til Death Cycles created this kit to eliminate the creation of...

Custom Dynamics Taillight Base Plate - Black  Features: Available in chrome or black Made in the USA OEM# 68296-99A Fitment YearMakeModel 2005 Harley-Davidson 15th Anniversary Fat Boy-Injected - FLSTF-I 1999 -...

Motorcycle Supply Co. - Harley LED Turn Signal Insert - 1157 (Dual Filament) White/ Yellow Upgrade to LED's with these easy plug in LED inserts from Motorcycle Supply Co. Outer ring (run) will illuminate white. When turn signal is activated outer white...

Motorcycle Supply Co Speeder Turn Signals The Speeders are available with Red, Amber or Smoked Lens. Features: The mounting stud is 1" long, requires slightly larger than 3/8" hole to mount. Cast Aluminum The Speeder Turn Signals are also...

Memphis Shades Adjustable Fork Clamps for 48-55MM Forks The Memphis Shades Fork Clamps are adjustable so you can make them fit just about any motorcycle with 48-55MM front forks. These are made from tough material and are chrome plated making them...

Cycle Visions Curved Slick Signals License Plate Frame in Black or Chrome Cycle Visions uses only the best material when it comes to their products. With that being said, you know these plate frames are high quality products. These fit most OEM fenders...

Motorcycle Supply Co. Red 5.75" LED Headlight This Motorcycle Supply Co. Red 5.75" Bulb is perfect for converting your Harley Sportster or Dyna standard bulb over to LED. Fitment: Harley Davidson Dyna & Sportster models with 5.75" Headlight...

Motorcycle Supply Co Speeder Turn Signals The Speeder Turn Signals are available with Red, Amber or Smoked Lens. These turn signals are perfect to mount to any custom motorcycle. The small sleek look is perfect for a Chopper, Bobber, Tracker, or just...

Motorcycle Supply Co. - Low-Pro LED Taillight - fits '99 & Up Harley Models - Smoked Motorcycle Supply Co.'s Low-Pro LED Taillight serves as a direct plug 'n play replacement for the stock taillight on most '99 & up Harley Davidson models...

TC Bros Choppers Two Inch Round Bobber Tail Light License Plate Bracket TC Bros unique modular design allows the license plate to be mounted horizontally or vertically on either the left or right side of the bike by bolting it together using the pre cut...

Motorcycle Supply Co. Black 5.75" LED Headlight Bulb This Motorcycle Supply Co. Black 5.75" Bulb is perfect for converting your Harley Sportster or Dyna standard bulb over to LED. Fitment: Harley Davidson Dyna & Sportster models with 5.75"...

Invader Black Turn Signals Standard Bulb with Amber Lens Features: Dimensions - 2-3/4" length, 1-5/8" width. The mounting stuf id 5/8" long, requires slightly larger than 3/8" hole to mount. This is not LED, it has a standard 12v bulb. Cast...

Motorcycle Supply Co. Copper 4.5" Headlight with Clear Lens This Copper Headlight from Motorcycle Supply Co. is the perfect way to get your Chopper or Bobber to stand out from the crowd. This headlight features a copper housing, and comes with a 3 wire...

Motorcycle Supply Co. - Smoked Harley Turn Signal Lenses Top off your turn LED signal lights with these smoked turn signal lenses. Sold In Pairs  

V-Twin Marker Lamp Set with Red Lens Single Stem Black V-Twin is a well-known, reputable brand. They sell quality parts like this one, at a reasonable price. Available in black with a red lens, this low profile lamp set is just what you need for you...

Headwinds Headlight Mounting Block 1-1/4" vertical offset and 1" forward offset Features Precision-machined T-6 billet aluminum with a chrome or black finish Blocks are machined 3/4" wide to fit most headlights and spotlights Made in the U.S.A.

Motorcycle Supply Co. Copper 4.5" Headlight with Yellow Lens Stand out from the crowd with this unique 4.5" Headlight, this headlight features a copper housing and a high/ low beam headlight. Specs: Copper Housing. 3 Wire High/ Low...

Motorcycle Supply Co. Slim Caged 5" Headlight Black with Amber Lens Slim caged 5-3/4" headlight features a steel black housing with a mesh grill over an amber hi/ lo beam headlight. Specs: 12V 60W High Beam/ 55W Low Beam. Black Housing. 3 Wire...

Drag Specialties - Short Turn Signal Mounts For 39MM/49MM Forks The Short Turn Signal Mounts are designed to move turn signals closer to the bike for a more sleek look. They are sold in pairs and the 49mm forks come with spacers for installation...

Motorcycle Supply Co. - Universal Bottom Mount 5-3/4" Headlight Bucket - Black The Motorcycle Supply Co. Universal Bottom Mount 5-3/4" Headlight Bucket is a high-quality replacement part for Harley Davidson motorcycles. Made from steel and...

Drag Specialties Single-Mount Headlight Bracket Features: Chrome single-mount headlight bracket is 3-7/8" long with 1-3/8" mounting slots, centered at 5-5/8" Fits many stock and custom front ends

V-Twin LED Tail Light - Black w/ Red Lens This round LED tail lamp is black with a red lens. It comes from V-Twin so you know it's made from quality products. Not only is the construction of this durable but it is accompanied by an LED light which are...

V-Twin 4.5" Copper Headlight - Clear Lens This chopper and bobber headlight is made from copper. Not only does that make it super durable but it looks cool too. This is the perfect way to add some different detail to that project you've been working on...

Motorcycle Supply Co. Black 4.5" Headlight with Amber Lens This chopper/bobber headlight has a 4.5" Bezel and is chrome with a amber lens Specs: Bates Style Headlamp. 12V H4 Bulb. Black Housing. 3 Wire High/ Low Beam. Fitment: Custom...

Motorcycle Supply Co LED 5 3/4 inch Headlight This LED 5-3/4" LED Headlight includes the headlight housing and is perfect for any custom motorcycle. This LED headlight would look great on a custom Sportster! For wiring details please take a look at the...