Super Glide FXR
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Pro-One - Steering Stem Bolt fits '99-'05 FXD & '88-'22 Sportster Models (Except RH Sportster)
Pro-One
$29.95Pro-One - Steering Stem Bolt fits '99-'05 FXD & '88-'22 Sportster Models (Except RH Sportster) Features: Replaces stock steering stem hardware Note: Replacement for Pro-One Triple Tree...$29.95 -
James Gasket - 39 mm Fork Seal fits '99-'05 FXR/Dyna, 'L87-'22 Sportster Models (Except RH Sportster (OEM #45378-87)) (10-Pack)
JAMES GASKET
$10.95James Gasket - 39 mm Fork Seal fits '99-'05 FXR/Dyna, 'L87-'22 Sportster Models (Except RH Sportster (OEM #45378-87)) (10-Pack) Features: High-quality replacement components Available in dealer packs of ten (sold each) or in packs of two (sold as...$10.95 -
James Gasket - Oil Pump Shaft Seal fits '68-'99 Big Twin Models (5-Pack) (OEM #26227-58)
JAMES GASKET
$5.95James Gasket - Oil Pump Shaft Seal fits '68-'99 Big Twin Models (5-Pack) (OEM #26227-58) Features: Replacement Outer Oil Pump O-Ring Fitment 1999 Harley-Davidson Softail Night Train FXSTB - - 1998 Harley-Davidson Road King...$5.95 -
James Gasket - 39 mm Fork Seals fits '99-'05 Dyna, 'L87-'22 Sportster Models (Except RH Sportster (OEM #45378-87))
JAMES GASKET
$12.95James Gasket - 39 mm Fork Seals fits '99-'05 Dyna, 'L87-'22 Sportster Models (Except RH Sportster (OEM #45378-87)) Features: High-quality replacement components Available in dealer packs of ten (sold each) or in packs of two (sold as pairs) Made in...$12.95 -
James Gasket - EVO Top End Gasket Kit fits '84-'91 Big Twin Models (OEM #17033-83)
JAMES GASKET
$141.95James Gasket - EVO Top End Gasket Kit fits '84-'91 Big Twin Models (OEM #17033-83) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Made in the USA Kit Includes: MLS Head Gaskets RCM Cylinder Base...$141.95 -
James Gasket - Top End Gasket Kit fits '84-'91 Big Twin (Cork Rocker Gaskets (OEM #17033-83))
JAMES GASKET
$96.95James Gasket - Top End Gasket Kit fits '84-'91 Big Twin (Cork Rocker Gaskets (OEM #17033-83)) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Made in the USA Kit Includes: 0.045" Head Gaskets with...$96.95 -
James Gasket - Transmission Seal Kit fits '84-'93 Big Twin Models
JAMES GASKET
$26.95James Gasket - Transmission Seal Kit fits '84-'93 Big Twin Models Features: Designed for most 4- or 5-speed Big Twin transmissions Made in the U.S.A. Fitment 1993 Harley-Davidson Wide Glide FXDWG - - 1993 Harley-Davidson Low...$26.95 -
Out of stock
Jims - 1748 Lockdown Axle Kit fits '99-'01 FLHT Model
Jims
$123.95Jims - 1748 Lockdown Axle Kit fits '99-'01 FLHT Model Features: Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components Swingarm end caps fit more precisely into the end of the swingarm, providing...$123.95 -
Jims - 2268 Main Case Seal Installer Tool fits '85-'06 5-Speed Big Twin & Aftermarket 6-Speeds Models
Jims
$98.95Jims - 2268 Main Case Seal Installer Tool fits '85-'06 5-Speed Big Twin & Aftermarket 6-Speeds Models Features: Ensures correct alignment, seal protection and depth when installing the seal Made in the...$98.95 -
Out of stock
Jims - 967 Inner Primary Bearing and Seal Remover/Installer Tool fits 'L84-'06 FXST/FLST & '85-'06 Touring & Dyna Models
Jims
$263.95Jims - 967 Inner Primary Bearing and Seal Remover/Installer Tool fits 'L84-'06 FXST/FLST & '85-'06 Touring & Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer...$263.95 -
Jims - 95760-57 Bushing Bearing Puller fits '66-'17 Big Twin (Except M-Eight), '57-'22 Sportster & Buell Models (Except 1125R)
Jims
$265.95Jims - 95760-57 Bushing Bearing Puller fits '66-'17 Big Twin (Except M-Eight), '57-'22 Sportster & Buell Models (Except 1125R) Features: Used to remove rocker bushing or bearing in one easy operation Made in the U.S.A...$265.95 -
Jims - 38515-90 Clutch Spring Compressor fits '90-'97 Big Twin & '91-'03 Sportster Models
Jims
$177.95Jims - 38515-90 Clutch Spring Compressor fits '90-'97 Big Twin & '91-'03 Sportster Models Features: For '91-'03 XL applications, compressor nut must be used in conjunction with compressor tool Used to release clutch spring so retainer ring can...$177.95 -
Out of stock
Jims - 1710 Outer Race Snap Ring fits '69-'02 Big Twin Models
Jims
$150.95Jims - 1710 Outer Race Snap Ring fits '69-'02 Big Twin Models Features: Used for removing and installing the Timken® bearing outer race snap ring A must for replacing rings in OEM and aftermarket cases Made in the U.S.A...$150.95 -
Jims - 33443-84 Tappet Aligning Tool fits 'L76-'17 Big Twin Models (Except M-Eight)
Jims
$32.95Jims - 33443-84 Tappet Aligning Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Can also be used to align rocker box bases on Evolution head (requires two tools) Also used in Harley-Davidson® Twin Cam oil pump alignment...$32.95 -
Jims - 1745 Bearing Simulator fits '70-'02 Big Twin Models
Jims
$107.95Jims - 1745 Bearing Simulator fits '70-'02 Big Twin Models Features: Designed to allow quick and easy removal and replacement of flywheel assembly in the left-side crankcase when checking rod-to-case, piston-to-flywheel or cylinder-to-flywheel...$107.95 -
Jims - 2260 Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive
Jims
$246.95Jims - 2260 Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive Features: Lock the transmission pulley for removing or installing pulley nut Made in the U.S.A...$246.95 -
Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models
Jims
$126.95Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models Features: Installs transmission shaft without the use of a hydraulic or arbor press Made in the U.S.A. Fitment 2008 Harley-Davidson Fat Bob...$126.95 -
Out of stock
Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser)
Jims
$108.95Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser) Features: Use to install steering head races, stock and custom, as well as install cups in the frame This tool pulls the races...$108.95 -
Out of stock
Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models
Jims
$367.95Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models Features: Tool is used to remove the sprocket shaft Timken® bearing on late '86-'02 Big Twins with an integral sprocket shaft Does the job better than anything else on the...$367.95 -
Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models
Jims
$136.95Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals Fitment 2002 Harley-Davidson Softail Fat Boy EFI...$136.95 -
Out of stock
Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models
Jims
$217.95Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models Features: Removes old bearing straight and will not damage the transmission case Can be used without removing transmission from the bike Made in the U.S.A...$217.95 -
Jims - 2256 Drive Gear Seal Installation fits All 5-Speed Big Twin Models
Jims
$155.95Jims - 2256 Drive Gear Seal Installation fits All 5-Speed Big Twin Models Features: Use to install main drive gear oil seal to the proper depth with transmission assembled Includes protective sleeve for seal, which can be used to protect main drive...$155.95 -
Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models
Jims
$73.95Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...$73.95 -
Out of stock
Jims - 2246 Timken® Bearing Race Installer fits '69-'02 Big Twin, '77-'03 Sportster & '82-'02 Buell Models
$385.95Jims - 2246 Timken® Bearing Race Installer fits '69-'02 Big Twin, '77-'03 Sportster & '82-'02 Buell Models Features: Used to install bearing race straight into the left crankcase A must for late-model cases Made in the U.S.A...$385.95 -
Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models
Jims
$46.95Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models Features: Removes oil screen without removing exhaust Used to remove the tappet oil screen plug Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...$46.95 -
Jims - 39361-69 Sprocket Shaft Seal Installation Tool fits '69-'10 Big Twin & Twin Cam Models
Jims
$161.95Jims - 39361-69 Sprocket Shaft Seal Installation Tool fits '69-'10 Big Twin & Twin Cam Models Features: Designed to press oil seal over sprocket shaft into case Made in the U.S.A. Fitment 2010 Harley-Davidson Street Glide Trike...$161.95 -
Jims - 35316-80 5-Speed Main Drive Gear Tool fits '80-'06 Big Twin (Except '06 Dyna) & '91-'06 Sportster Models
Jims
$370.95Jims - 35316-80 5-Speed Main Drive Gear Tool fits '80-'06 Big Twin (Except '06 Dyna) & '91-'06 Sportster Models Features: Installs the main drive gear without removing the transmission Used to remove and install the main drive gear Made in the...$370.95 -
Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models
Jims
$363.95Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models Features: Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S...$363.95 -
Jims - 1707 Cleveblock Spreading Tool fits '80-'01 5-Speed Rubber-Mount Frames
Jims
$69.95Jims - 1707 Cleveblock Spreading Tool fits '80-'01 5-Speed Rubber-Mount Frames Features: Spreads the swing arm cleveblocs allowing for installation of the swing arm Use to install the swing arm in a 5-Speed rubber mount frame Comes with...$69.95 -
Jims - 34623-83 Piston Pin Tool fits '84-'99 Big Twin (Except Twin Cam), '86-'03 Sportster Models
Jims
$197.95Jims - 34623-83 Piston Pin Tool fits '84-'99 Big Twin (Except Twin Cam), '86-'03 Sportster Models Features: This tool will install “Round Circlip” rings in one easy step without distorting ring, for the safest wrist pin retention...$197.95 -
Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84)
Jims
$82.95Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...$82.95 -
Out of stock
Jims - 1010 Evolution Rod Alignment Tool for 0.791” Wrist Pin
Jims
$42.95Jims - 1010 Evolution Rod Alignment Tool for 0.791” Wrist Pin Features: Use to check rod straightness without removing the rods from the cases Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...$42.95 -
Out of stock
Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70))
Jims
$77.95Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking...$77.95 -
Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam)
Jims
$651.95Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam) Features: Use on all Big Twin '54-'99 single cam only, (NOTE: Includes aftermarket motors, also XL '57 to early '84 idler gear bushing) Designed to line-ream...$651.95 -
Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam)
Jims
$149.95Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam) Features: Holds cam cover flat and helps prevent damage/scratches when removing and installing bushings Clamps in vice or Bridgeport™ mill Made in the U...$149.95 -
Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R)
Jims
$197.95Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R) Features: Use to remove and install wrist pin bushings without removing rods from crankcase Made in the U.S.A...$197.95 -
Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames)
Jims
$130.95Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and installs steering head bearing race on 84-16 Big Twin...$130.95 -
Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models
Jims
$295.95Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing Made in the U.S.A...$295.95 -
Jims - 1743 Swingarm Bushing Tool fits '80-'01 FLT/FLHT, '82-'99 FXR & all Aftermarket FXR-Style Frames
Jims
$359.95Jims - 1743 Swingarm Bushing Tool fits '80-'01 FLT/FLHT, '82-'99 FXR & all Aftermarket FXR-Style Frames Features: Allows installation of delicate, silicone cleveblock bushings in swingarm without damage Tool presses on outer sleeve of...$359.95 -
Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84)
Jims
$61.95Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...$61.95