2013

Jims - 938 7mm Valve Guide Installer fits '05-'17 Twin Cam, '04-'20 Sportster & '04-'09 Buell Models (Except 1125CR) Features:

Jims - 5506 Magnetic Tappet Holder fits all Twin Cam & M-Eight Models Features: Never turn the engine over if the tappet will not spin with your fingers after adjustments were made

Jims - 5530 Remote Fuel Tank fits H-D Models w/ Delphi Fuel Injection (Except V-Rod) Features: Tank is completely mobile, even when pressurized; canister does not need to be continuously...

Jims - 5820 Standard Rear Axle Installation Guide Tool fits '08-'21 Big Twin w/ Hollow 1” (25 mm) Features: Aligns wheel with swingarm, caliper brackets, wheel hubs and spacers Made i

Jims - 2244 3/8" 35 mm Fork Nut Socket fits For Big Twin & Sportster Models Features: Used to remove and install top fork nuts on fork tubes

Jims - 1146 Crankshaft Bearing Installer fits '00-'17 Twin Cam “B” Motors Models Features: Designed to protect engine cases by using a specially-designed support block to remove or install cam...

FLHRS Jims - 2043 41mm Fork Nut Socket fits '48-'17 Wide Glide Models Features: Eliminates possible burring of plug caused by wrenches Used to remove and install top fo

Jims - 1705 Exhaust Drill Plate fits '84-'17 Big Twin (Except M-Eight), '86-'22 Sportster & '94-'09 Buell Models (Except 1125R) Features: Will position the seal evenly into the exhaust port of...

Jims - 95760-57 Bushing Bearing Puller fits '66-'17 Big Twin (Except M-Eight), '57-'22 Sportster & Buell Models (Except 1125R) Features: Used to remove rocker bushing or bearing in one easy...

Jims - 33443-84 Tappet Aligning Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Can also be used to align rocker box bases on Evolution head (requires two tools)

Jims - 2260 Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive Features: Lock the transmission pulley for removing or installing pulley nut

Jims - 1288 Crankshaft Guide fits '99-'17 Twin Cam & '03-'09 Buell XB9R/X B9S Models Features: Spreads the crankcase pinion bearing rollers when reassembling right side case to the flywheel...

Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser) Features: Use to install steering head races, stock and custom, as well as...

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket

Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models Features: Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A.

Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R) Features: Use to remove and install wrist pin bushings without removing rods from...

Jims - 955 Gauge for Harley-Davidson Injection Pressure fits '01-'20 Big Twin Models w/ Delphi EFI (Except '18-'20 Softails) Features: Includes all necessary parts to diagnose Delphi fuel...

Jims - 954 Pump Ring Tool fits '08-'20 FLHT Model Features: Use for quick and easy service of fuel filter and other fuel-related parts Removes/installs retaining ring holding fuel pump

Jims - 970 3rd Hand Axle Locker Tool fits '02-'21 FLT/​FLHT Models Features: Eliminates the need for a helper or trying to blindly hold the axle from the other side of the tire Prevents axl

Jims - 977 Fork Stem Nut Wrench fits '96-'13 FLHT & '94-'13 FLHR Models Features: This tool allows the ability to loosen, tighten and torque to spec the 1-1/2” stem nut without radio removal

Jims - 5822 Swing Arm Bearing Installer fits '02-'21 Touring Models Features: Both drive side and brake side bearings, which are at different depths, can be easily and accurately installed with...

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and...

Jims - 1017-37TB Cam Bushing Installer fits '37-'48 Big Twin Side-Valve Motors, '54-'20 Sportster, '91-'09 Buell Models (Except 1125R) Features: Use to install bushing and drill dowel pin hole to...

LA Choppers - Pinned Hefty Top Clamp fits '99-'23 Big Twin Models w/ 3-1/2 ” on Center Risers & Offset Mounting Holes Features: Fits Hefty handlebars and risers Polished aluminum construction

Custom Cycle Engineering - Engine Equator II fits '09-'16 Touring Models Features: Allows all Dresser riders to correct chassis misalignment, which is impossible to achieve with the stock motor...

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits '99-'13 Touring (Except H-D FL Trike), '00-'17 Softail (Except FXS/​FXCW/​FXCWC), '00-'05 FXDWG Models (OEM #45890-97,...

Alloy Art - Front Adjustable Stabilizer Link fits '09 & Up Touring Models The Comp Front Stabilizer Link from Alloy Art was born on the racetrack. Originally adapted from the Dyna Combi Link, this...

Belt Drives Ltd. - 2" Belt Drive Kit fits '14-'16 FLHT/​FLHR/​FLTRX w/ Hydraulic clutch (Exc. FLHTCUL/​FLHTKL) Features: Features a two-piece motor plate design and 2" primary belt 52/69 pulley...

Belt Drives Ltd. - 2" Belt Drive Kit fits '17-'20 FLHT/​FLHR/​FLHX/​FLTRX/​FLTRU/​FLTRK w/ Hydraulic Clutch Features: Features a two-piece motor plate design and 2" primary belt 52/69 pulley...

Drag Specialties - Side Hinge Ignition Switch fits '99-'11 FXDWG, '08-'11 FXDC/​FXDF, '00-'10 FXST/​FLST, '99-'13 FLHR Models (Repl. OEM #71313-96A) Features: Includes two keys Fork lock...

Drag Specialties - Transmission Pulley 32 Tooth fits '07-'16 FXD/​FXST/​FLST/​FLT Models ( OEM #40659-06) Features: Heat-treated steel construction Direct OEM replacement

Drag Specialties Round Tapered Sissy Bar - Chrome fits '90-'99 FLSTF, '58-'84 FL/​FLH Models - 10.12"H x 8.75"W Available in 10.12"H x 8.75"W Features: All sissy bars are constructed from 9/16"...

Drag Specialties Square Sissy Bar - Chrome fits '90-'99 FLSTF, '58-'84 FL/​FLH Models - 10.14" H x 8.75" W Available in 10.14" H x 8.75" W Features: Bars are constructed from 9/16" solid steel

Drag Specialties Square Sissy Bar - Chrome fits '90-'99 FLSTF, '58-'84 FL/​FLH Models - 14.75" H x 8.75" W Available in 14.75" H x 8.75" W Features: Bars are constructed from 9/16" solid steel

Drag Specialties Round Tapered Sissy Bar - Chrome fits '06-'10 FXST/S/B, '07-'17 FLSTF, '18-'23 FLSB/​FXLR Models (Except '07-'10 FXSTC) - 11"H x 11"W Available in 11"H x 11"W Features: All...

Drag Specialties Square Sissy Bar - Chrome fits '06-'10 FXST/S/B, '07-'17 FLSTF, '18-'23 FLSB/​FXLR Models (Except 07-10 FXSTC) - 11" H x 11" W Available in 11" H x 11" W Features: Bars are...

Drag Specialties Square Sissy Bar - Chrome fits '06-'10 FXST/S/B, '07-'17 FLSTF, '18-'23 FLSB/​FXLR Models (Except 07-10 FXSTC) - 15.5" H x 11" W Available in 15.5" H x 11" W Features: Bars are...

Drag Specialties Square Short Sissy Bar - Black fits '14-'23 Touring Models - 11" W Available in 11" W Features: Bars are constructed from 9/16" solid steel Easy, bolt-on design - no drilling r

Drag Specialties - 66-11/16" Black Vinyl High-Efficiency Clutch Cable (Repl. OEM #38787-06/ 38788-06A) Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner...

Slyfox - Billet Aluminum Mini Floorboards fits Harley Touring Models These mini floorboards are perfect for your passenger of your Harley Davidson Touring Model, or can be used on other Harley...