V-Twin Manufacturing

V-Twin - 51-0979 - Frame Swingarm ChromeDescriptionChrome frame swingarm.Order pivot kit separately. The width of the inner diameter where the axle goes measures 9-7/8". From the cente rof the axle...

V-Twin - 51-0978 - Swingarm ChromeDescriptionChrome swingarm for Softail models.Swingarm includes spherical bearings installed. Not for use on 2006-2007 FXST and 2007-up FLSTF. ...

V-Twin - 51-0901 - Chrome Front Engine BarDescriptionChrome front engine bar features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique...

V-Twin - 51-0899 - Black Front Engine BarDescriptionEngine bar with 1" tubing.Order U-clamp separately. WARNING: This engine/frame bar may provide...

V-Twin - 51-0898 - Black Rear Frame SwingarmDescriptionRear frame swingarm is black and is for 4-speed rear chain drive models. Bearings and races are not included.Measures 12.250" from center of...

V-Twin - 51-0897 - Front Engine Bar ChromeDescriptionEngine bar features 1-1/4" tubing.Includes bolts. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under...

V-Twin - 51-0896 - Chrome Front Engine BarDescriptionEngine bar features 1" tubing for use on early wishbone frames.Order U-clamp separately. WARNING:...

V-Twin - 51-0895 - Chrome Rear Big Twin Frame BarDescriptionRigid frame bar for the rear with 7/8" tubing features a chrome finish.WARNING: This engine/frame bar may provide limited leg and cosmetic...

V-Twin - 51-0889 - Black Rear Big Twin Frame BarDescriptionRigid frame bar for the rear with 7/8" tubing features a black finish.WARNING: This engine/frame bar may provide limited leg and cosmetic...

V-Twin - 51-0883 - Chrome Front Engine BarDescriptionEngine bar features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique...

V-Twin - 51-0874 - Frame Top Engine MountDescriptionFrame top engine mount is two halves with seat tee and rear tank mounts incorporated into the top mount.Weld in place for accurate restoration. ...

V-Twin - 51-0634 - Billet Axle Cover SetDescriptionBillet axle cover set for Wide Glide frames. Fits:Custom application for Chopper and Softail framesAdditional Information UOM1 - SET ...

V-Twin - 51-0609 - Front Engine Bar SpacerDescriptionFront engine bar spacer will fit wishbone frames. Fits:FL 1948-1953Additional Information OEM No.49059-48 UOM1 - SET ManufacturerV-Twin ...

V-Twin - 51-0575 - Cable Mount Frame TabDescriptionCable mount frame tab is for under tank. Fits:FL 1955-1972Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025...

V-Twin - 51-0520 - Frame Neck without CupsDescriptionBig Twin neck forgings machined to accept stock diameter tubing with 30  rake.Includes key lock tab and right hand number boss forged in neck...

V-Twin - 51-0500 - Side Car Mount SetDescriptionReplica 1936 style raw steel frame side car mount set is for attachment by brazing.This mount set can also be used on custom frames by welding. Fits:EL...

V-Twin - 51-0424 - Clear WindshieldDescription10" clear Batwing fairing windshield.Reduces helmet buffeting while allowing a view unobstructed by dirt, bugs and raindrops. Constructed of hardcoated...

V-Twin - 51-0423 - Clear WindshieldDescription10" clear Batwing fairing windshield.Reduces helmet buffeting while allowing a view unobstructed by dirt, bugs and raindrops. Constructed of hardcoated...

V-Twin - 51-0392 - D+D Rigid FrameDescriptionD+D rigid frame is constructed of heavy gauge steel tubing for 1973-84 Shovelhead engines. Frame features 30 degree rake, zero stretch, 1-1/2" outer...

V-Twin - 51-0295 - Beaded WindshieldDescriptionBeaded windshield is 21-3/4" tall and is for 1967-2010 Sidecars.Installation hardware not included, must be ordered separately. There are 5 mount holes...

V-Twin - 51-0088 - Replica Wishbone Rigid FrameDescriptionExact Replica of the original style frame only updated to accept flat side tanks. Frame has many options for the look you want!Frame will...

V-Twin - 51-0058 - Frame Dowel SetDescriptionSolid steel frame dowel set is for the installation of hardtails.Outer diameter on small end is .7225 and large end is .8375. *NOTE: Must be welded in...

V-Twin - 51-0046 - Rear Motor Mount CastingDescriptionRear motor mount casting features an investment cast construction and is for rigid frames. Fits:XL 1982-2003Additional Information UOM1 - EA ...

V-Twin - 50-1764 - Rear Fender Brace ZincDescriptionRear fender brace features a zinc finish. Fits:Custom applicationAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 50-1577 - Spring Fork Fender KitDescriptionFender kit includes 6" wide front fender shell and bracket.Bracket is black finish, hardware not included. Fender must be drilled before...

V-Twin - 50-1566 - Front Fender BraceDescriptionFender bracket mounts to the front fork leg at shock mount holes.Bracket for Bobber front fender may be installed on front or rear of front spring fork...

V-Twin - 50-1294 - FXD Rear FenderDescriptionFXD rear fender is full length type and accepts stock tail lamp. Mounts to existing struts.May require additional holes for specific applications...

V-Twin - 50-0934 - Tool Box KitDescriptionTool box kit includes chrome oval tool box with 2 keys, zinc plated mount bracket and liner.Bracket will mount tool box on left side in rear of outer primary...

V-Twin - 50-0914 - Front Fender Trim KitDescriptionStainless steel front fender trim kit.Set includes 2 front fender front end side strips, 1 right front fender rear end side strip, 1 left front...

V-Twin - 50-0793 - Rear Fender Kit BobbedDescriptionBobbed rear fender kit includes a pre drilled steel fender, chrome struts, chrome tail lamp bracket, and stock style tail lamp.We suggest pre...

V-Twin - 50-0654 - Rear Bobbed FenderDescriptionBobbed rear fender with rolled end features a raw steel finish and is to use with chrome struts. Fits:FX 1973-1984FL 1958-1984Additional Information ...

V-Twin - 50-0483 - Rigid Rear Fender TailDescriptionRigid rear fender tail does not include a skirt or braces. Fits:EL 1936-1948FL 1941-1948Additional Information UOM1 - EA ManufacturerV-Twin ...

V-Twin - Chrome Rear Axle Adjuster fits '87-'92 FXST Model (OEM #47577-86) Adjuster kit includes collars and adjuster screws with nuts. Fitment: FXST 1987-1992 Measurements: Inner...

V-Twin - Chrome Rear Exhaust Bracket fits '80-'03 Sportster Model (OEM #65599-80D) Chrome rear exhaust bracket is for 1980-2003 XL models Fitment: XL 1980-2003

V-Twin - Left Side Frame Caliper Mount Set fits Custom Application for Rigid Frame Left side rigid frame caliper mount set is weld on type. Note: Slotted plate is to be welded to frame, angle...

V-Twin - Battery Top Cover and Strap Kit fits '73-'84 FXE Electric Start Model Kit includes proper cover and hold down strap for electric start models. Fitment: FXE 1973-1984 Fits electric...

V-Twin - Chrome Battery Carrier Kit fits '80-'84 FXE, '81-'84 FLHS-80 Models (OEM #66191-80) Battery carrier kit fits stock frames with bracket and ISO mounts included as required. Unit is chrome...

V-Twin - OKO 22mm Rotary 90° Brass Petcock fits Custom Application Brass OKO rotary 90° petcock with 22mm National Pipe Thread. Our rotary petcock design first offered in 2013...

V-Twin - Tro-Cy Brass Petcock 3/8" NPT Solid machined natural brass, with 3/8" NPT thread and "full bore" 3/8" hose end. For all tanks with 3/8" NPT bungs. Note: 1970's original design by...

V-Twin - 39MM Chrome Replica Triple Tree Set fits '04-'13 Sportster Models (Except XL 883L) Replica triple tree set includes upper and lower trees for 39mm for tubes. Triple tree set does not...