V-Twin Manufacturing

V-Twin - Old School Chopper/ Bobber Polished Hand Lever Assembly 9/16" Bore Master Cylinder This old school polished hand lever assembly fits 1" handlebars and includes clutch and brake lever/perch...

V-Twin - King 3.3 Gallon Gas Tank fits Harley XL Sportster '04-06 This low profile sleek looking gas tank is just what your Harley Davidson Sportster needs. Easily installed and bare with a smooth...

Harley Davidson FLT Rear Axle Kit fits 1986-1999 Rear axle kit includes 12-1/2" bearing surface length axle with 3/4" outer diameter. Fitment: FLT 1986-1999 Measurements: Bearing Surface -...

V-Twin Dual LED Headlamp - fits '04-'13 FLTR Features Dual unit includes two LED daylight headlamps mounted onto a backing plate for easy installation features a chrome or black finish housing...

V-Twin - PK Style Tail Light - Chrome The V-twin PK tail light for fender mounting features chrome finish and a cone shaped glass lens included. Includes 12 volt bulb for brake and tail lamp and...

VT No: 35-0935 Petcock replaces the needle valve seat on and S&S "E" carburetor. Features full brass construction and mounts directly to the carburetor. Fits:Replacement application for S&S...

VT No: 35-0758 Brass hex petcock has inward spigot and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot with nut. On/Off handle is chrome. Fits:FL...

VT No: 35-0757 Brass hex petcock has 90° right hand spigot and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot. On/Off handle is chrome. For...

Raw fender has a thickness of 1mm. Will fit 2004-up XLH model. This chopped rear fender is shorter then the bobbed style and is recommended that a side mount tail lamp be used. A stock tail lamp...

V-Twin Front Fender: Motorcycle Front fender is constructed of a steel shell riveted to a steel bracket. Fender has a raw finish. For use on 18" wheels. We suggest pre-fitting the fender prior to...

V-Twin Legacy 3.8 Gallon Gas Tank fits '07-Up Harley XL Sportster Models The V-Twin Legacy style 3.8 gallon gas tank with stock screw bung gives functional styling, is fully pressure tested, and...

V-Twin - Legacy 3.8 Gallon Gas Tank - fits '04-'06 Sportster Models The V-Twin Legacy style 3.8 gallon gas tank with stock screw bung gives functional styling, and features a single left hand...

V-Twin Bobbed 2.3 Gallon Gas Tank - fits '04-'06 Harley XL Sportster Models Bobbed gas tank accepts a left side petcock and has a fuel capacity of 2.3 gallons. Tank includes mounting hardware...

V-Twin - Bobbed 2.3 Gallon Gas Tank - fits '07-Up Harley XL Sportster Models The V-twin Bobbed gas tank accepts a left side petcock and has a fuel capacity of 2.3 gallons. Tank includes mounting...

V-Twin Chopper 3.1 Gallon Gas Tank The V-twin Universal chopper style tank has a right side petcock opening, and a fuel capacity of 3.1 gallons. It has front and rear mounting tabs. The tank accepts...

V-Twin Chopper 2.5 Gallon Gas Tank The V-Twin Chopper Style Gas tank has a right side petcock location, and a fuel capacity of 2.5 gallons. The tank is universal with front and rear mounting tabs...

V-twin large, thin, tuck and roll style solo seat features black vinyl covering on a steel base plate. Measurements Length: 13" Width: 14" Thickness: 6 cm  Fits: Custom application

V-twin large thick style tuck and roll style solo seat features black vinyl covering on a steel base plate. Length: 13" Width: 14" Thickness: 8 cm  Fits: Custom application

V-twin black vinyl solo seat features a metal base-plate which includes studs for mounting springs and nose brackets. Order mount kits and nose T bracket separately. The two spring studs under the...

This V-twin small, thin style tuck and roll  solo seat features black vinyl covering on a steel base plate. Length: 12-1/2" Width: 10" Thickness: 6 cm  Fits:Custom application

The V-Twin Dual Handlebar Switch Kit, features a custom CNC made billet aluminum housing. Kit includes 2 stainless steel switches, 25" colored wiring and mounting hardware kit ready to install...

V-Twin Enrichner for CV Carburetors This CV adjustable choke cable eliminiator features full 360 brass construction. For use with CV Keihin carburetors. Features: This unit will replace the...

 V-Twin Slash down cut muffler set Features: Features removable baffles and mounts using the motorcycle's original hardware. Sold as a pair Provides riders with increased...

V-Twin PK Style Tail Lamp This tail lamp has authentic details and will look great mounted on your fender. Features: Polished aluminum Cone shaped glass lens included. Also includes 12 volt...

V-Twin Mfg - 39MM Chrome Fork Shroud Set fits '04-Up XL Models The V-Twin Mfg - 39MM Chrome Fork Shroud Set is designed for '04-Up XL motorcycle models with 39mm forks, featuring a stylish chrome...

V-Twin Mfg - 39MM Black Fork Shroud Set fits '04-Up XL Models The V-Twin Mfg - 39MM Black Fork Shroud Set is designed for '04-Up XL motorcycle models with 39mm forks, featuring a stylish...

V-Twin Mfg - 39MM Chrome Fork Shroud Set - fits '86-'03 Sportster Models The V-Twin Mfg - 39MM Chrome Fork Shroud Set is designed specifically for '86-'03 XL motorcycle models equipped with 39mm...

V-Twin Mfg - 39MM Black Fork Shroud Set - fits '86-'03 XL Models The V-Twin Mfg - 39MM Black Fork Shroud Set is designed specifically for '86-'03 XL motorcycle models equipped with 39mm forks...

1200cc XL Conversion cylinder and piston set includes 2 black finished with milled edge fin cylinders with fitted Wiseco moly 9.5:1 reverse dome piston ring set. Order head base gasket separately...

1200cc XL Conversion cylinder and piston set includes 2 silver finished with milled edge fin cylinders with fitted Wiseco moly 9.5:1 reverse dome piston ring set. Order head base gasket separately...

V-Twin's 1200cc XL conversion cylinder and piston set includes 2 black finished with milled edge fin cylinders. Cylinders have fitted Wiseco moly 9.5:1 reverse dome piston and ring set. Order rocker...

V-Twin's 1200cc XL conversion cylinder and piston set includes 2 silver finished with milled edge fin cylinders. Cylinders have fitted Wiseco moly 9.5:1 reverse dome piston and ring set. Order...

Chrome Pushrod Cover kit includes upper and lower pushrod covers, seals, springs. Fits: XL 1957-1979 Early 1979

1200cc XL cylinder and piston conversion kit includes two black finished cylinders with milled edge fin and fitted Sifton moly 9.5:1 reverse dome piston and ring set. Fits: XL 1986-2003

Timken left crankcase main bearing set is factory assembled with correct spacer for proper end play. Sold as a pair. Fits: XL 1977-2003 OEM No: 24729-74

Bushing set include bushings for #1, 2, 3, 4 cams. NOTE: Bushing set is for outer cam cover. Set of four. Fits: XL 1957-1990 OEM No: 25588-80

V-Twin - Motor Mount Kit - Fits EL '36-'40 FL '41-'69 V-Twin Upper and lower motor mount bolt kit is available in chrome, cadmium, or a parkerized finish. FitmentEL 1936-1940FL 1941-1969

Harley Sportster Rocker box cover set with black finish. Fits: XL 2007-2012

V-Twin - Black/ Copper 5-3/4" Bottom Mount Headlight This is a Bates style mount headlamp with traditional glass composite beam. Features: 5-3/4" headlamp bottom mount and H-4 bulb black...

V-Twin - Air Cleaner Assembly Kit Black - Fits Harley XL Sportster '91-Up   Air Cleaner Assembly includes oval air cleaner with black mesh cover, integral breather system with bracket, and...