James Gasket - Primary Gasket Kit fits '84-'86 Touring & '84-'88 Softail Models w/ Silicone Bead Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Transmission Gasket/Seal Kit fits '93-'98 FLT/​FLHT Models (OEM #33031-93) Features: Made in the U.S.A. Fitment 1993-1998 Harley-Davidson Electra Glide Classic FLHTC - - 1993-1997 Harley-Davidson Electra Glide...

James Gaskets - JGI-81-FL - Mylar® Gasket/Seal Kit - Fits '84-'91 Evolution Big Twin & '81-'84 Shovelhead Models Fits: '84-'91 Evolution Big Twin & '81-'84 Shovelhead Models. Full year/model list is on the Fitment tab. Mylar® Gasket/Seal Kit from James...

James Gaskets - JGI-92-FLH - Paper Gasket/Seal Kit - Fits '92-'99 Evolution Big Twin Models Fits: '92-'99 Evolution Big Twin Models. Full year/model list is on the Fitment tab. Paper Gasket/Seal Kit from James Gaskets, the gasket outfit Harley builders...

James Gaskets - JGI-16770-84-S - Big Bore Kit with Black PTFE Head Gasket - Fits '84-'99 Evolution Big Twin Models (.045” Black PTFE Head Gaskets) Fits: '84-'99 Evolution Big Twin Models (.045” Black PTFE Head Gaskets). Full year/model list is on the...

James Gaskets - JGI-45849-84-K - Air Control O-Ring Kit - Fits '84-'96 FLT & '84-'93 FXR Models w/ Air Control Front Forks Fits: '84-'96 FLT & '84-'93 FXR Models w/ Air Control Front Forks. Full year/model list is on the Fitment tab. Air Control O-Ring...

James Gasket - Transmission Seal Kit fits '94-'98 Big Twin Models Features: Designed for most 4- or 5-speed Big Twin transmissions Made in the U.S.A. Fitment 1998 Harley-Davidson Road Glide FLTR - - 1998 Harley-Davidson Road...

James Gasket - Transmission Seal Kit fits '84-'93 Big Twin Models Features: Designed for most 4- or 5-speed Big Twin transmissions Made in the U.S.A. Fitment 1993 Harley-Davidson Wide Glide FXDWG - - 1993 Harley-Davidson Low...

James Gaskets - JGI-37741-82-K - 4-Speed Transmission Seal Kit - Fits '82-'84 FL/​FLH Models (Double-Lip Main Seal) Fits: '82-'84 FL/​FLH Models (Double-Lip Main Seal). Full year/model list is on the Fitment tab. 4-Speed Transmission Seal Kit from James...

James Gaskets - JGI-34901-94-K - Primary Gasket Kit - Fits '98-'04 FLT/​FLHT/​FLHR/​FXR Models w/ Silicone Bead Fits: '98-'04 FLT/​FLHT/​FLHR/​FXR Models w/ Silicone Bead. Full year/model list is on the Fitment tab. Primary Gasket Kit from James Gaskets,...

James Gaskets - JGI-17033-83-S - 80" Top End Gasket Kit - Fits '84-'91 Evolution Models (3-5/8" Big Bore) Fits: '84-'91 Evolution Models (3-5/8" Big Bore). Full year/model list is on the Fitment tab. 80" Top End Gasket Kit from James Gaskets, the gasket...

James Gaskets - JGI-27202-95-K - Induction Module Gasket Kit - Fits '99-'01 FLT/​FLHT/​FLHR Models Fits: '99-'01 FLT/​FLHT/​FLHR Models. Full year/model list is on the Fitment tab. Induction Module Gasket Kit from James Gaskets, the gasket outfit Harley...

James Gaskets - JGI-17042-92-SS - Rocker Cover Kit Gasket - Fits '84-'99 S&S Evolution Models Fits: '84-'99 S&S Evolution Models. Full year/model list is on the Fitment tab. Rocker Cover Kit Gasket from James Gaskets, the gasket outfit Harley builders...

James Gaskets - JGI-81-FLH - Oil Pump Repair Paper Gasket/Seal Kit - Fits '84-'91 Evolution Big Twin, '81-'84 Shovelhead Models Fits: '84-'91 Evolution Big Twin, '81-'84 Shovelhead Models. Full year/model list is on the Fitment tab. Oil Pump Repair Paper...

James Gaskets - JGI-60538-81-K - Primary Gasket Kit without Seal - Fits '65-'86 Touring & '84-'88 Softail Models Fits: '65-'86 Touring & '84-'88 Softail Models. Full year/model list is on the Fitment tab. Primary Gasket Kit without Seal from James...

James Gaskets - JGI-27002-00 - 44 mm Carburetor Intake Manifold Seal Kit - Fits '99-'06 Twin Cam & '88-'06 Sportster Models Fits: '99-'06 Twin Cam & '88-'06 Sportster Models. Full year/model list is on the Fitment tab. 44 mm Carburetor Intake Manifold...

Jims - 1748 Lockdown Axle Kit fits '99-'01 FLHT Model Features: Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components Swingarm end caps fit more precisely into the end of the swingarm, providing...

Jims - 8385 Compensator Nut Retainer fits '12-'13 Twin Cam & Screamin’ Eagle Models (OEM #83935-09A, 40274-08A) Features: Lockplate secures nut into sprocket retainer Incorporated lock tab One piece sprocket retainer for strength Made in...

Jims - 1733 Mega Nut fits '07-'20 Big Twin & '06-'17 Dyna Models Features: Includes machined clamping face tolerance, along with additional locking holes for a more precise and secure way to secure pulley nut Made in the U.S.A...

Jims - 943 Ignition Switch Alignment Tool fits '03-'13 Touring & '02-'10 V-Rod Models Features: Also used to position switch in the correct orientation for properly activating the fork lock Proper alignment of the switch will extend the life of...

Jims - 942 Ignition Switch Connector Tool fits '03-'13 Touring & '02-'10 V-Rod Models Features: Slip the dog bone end of tool into the bottom side of connector until it is touching the back end of connector box Then gently pull out the male...

Jims - 944 Ignition Switch Alignment Tool fits '14-'21 Touring Models Features: Also used to position switch in the correct orientation for properly activating the fork lock Proper alignment of the switch will extend the life of the ignition switch...

Jims - 981 Cruise Drive/6-Speed Main Drive Gear Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: Holds the main drive gear square to its bearing bore, eliminating any marring of gear or bearings Installs the main drive gear without...

Jims - 986 Cruise Drive/6-Speed Main Drive Gear Bearing/Seal Installer Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a...

Jims - 984 Transmission Door Puller fits '07-'17 Big Twin & '06 Dyna Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings...

Jims - 989 Main Drive Gear Sprocket Locknut Wrench fits '07-'21 Big Twin & '06 Dyna Models Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the USA Inner...

Jims - Shifter Shaft Removal Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Loosens and removes both shifter shafts from transmission door, allowing further disassembly of transmission Made in the...

Jims - 939 Sealed Wheel Bearing Tool fits '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-ROD Models Features: Removes and installs 3/4", 1" and 25 mm wheel bearing with or without Anti-Locking Brake System (ABS) Made in the U.S.A...

Jims - 901 Cruise Drive/6-Speed Main Drive Gear Remover Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Removes the main drive gear from the main bearing correctly while in the transmission case Eliminates the need of an arbor press and...

Jims - 911 Cruise Drive/6-Speed Trap Door Bearing Remover/Installer fits '07-'20 Big Twin & '06 Dyna Models Features: Accurately installs and removes lubed ball bearing into transmission trap door No arbor press needed Made in the U.S.A...

Jims - 767 6-Speed Transmission Case Shifter Shaft Seal Installer fits '06-'20 Big Twin & '84-'05 Sportster Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and installs shifter seal to correct...

Jims - 768 5-Speed Transmission Case Shifter Shaft Seal Installer fits '80-'99 Big Twin, '99 Twin Cam, '99-'06 FXST & '99-'05 FLT/F LHT/​FXD Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and...

Jims - 1658 Transmission Shifter Shaft Sleeve Tool fits '06-'20 6-Speed H-D Cruise Drive Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use to install shifter shaft sleeve Made in the...

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 967-4 Installation/Removal Inner Primary Bearing Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also...

Jims - 967-5 Inner Primary Bearing Tool fits '07-'19 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also removes and installs...

Jims - 913 Wheel Bearing Support Plate Tool fits '14-'20 FL w/ Cast Wheels & '10-'20 CVO Models Features: Provides accurate and precise bearing removal and installation without the risk of damage to cast wheels Attaches to the brake rotor...

Jims - 2268 Main Case Seal Installer Tool fits '85-'06 5-Speed Big Twin & Aftermarket 6-Speeds Models Features: Ensures correct alignment, seal protection and depth when installing the seal Made in the...

Jims - 5502 Ultimate Clutch Adjusting Tool fits '85-'20 Big Twins Models w/ Mechanical Clutch Features: Allows the quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change position No more guessing or...