V-Twin - 10-0947 - Finned Style Cast Cam Cover ChromeDescription4 fin style cam cover with the top oil bolt hole for overhead oiler models of Panhead. Forged construction features a chrome finish.Cam cover bushings must be checked and fitted (reamed) for...

V-Twin - 10-0945 - Knucklehead 74 inch Engine Case Set NaturalDescription74" motor case for knucklehead motors accurately cast and machined. Features a natural cast finish and a blank number boss. Manufacturer's Bill of Sale available upon request.Case...

V-Twin - 10-0942 - 1936 61 inch Knucklehead Engine Case SetDescriptionFor 61" Knucklehead motors accurately cast and machined by Motortechnic in Germany. Features a natural cast finish and a blank number boss.Set accepts large or small OD flywheels that...

V-Twin - 10-0940 - WR Rod Cage and Roller SetDescriptionRod cage and roller set includes 4 cages, 18 long rollers and 36 short rollers.Set of four cages. Fits:XL 1957-1980WR 1936-1952Additional Information UOM1 - KIT ManufacturerMotorshop ...

V-Twin - 10-0938 - Left Side Engine CaseDescriptionLeft side engine case for aluminum electric start inner primary application on 1965 Panhead and 1966-69 Flat Side Shovelhead engines.Left hand case must be fit to existing right side case. Cylinder deck...

V-Twin - 10-0937 - Left Side Panhead Engine CaseDescriptionLeft side engine case features a blank number boss.Left hand case must be fit to existing right side case. Number boss is blank. Will accept Timken roller bearing assembly, not included. Cylinder...

V-Twin - 10-0921 - Crank Pin Plug SetDescriptionPlug set is press fit into TC-88 crank pin ends.Sold as a set of 2. Fits:FLT 1999-UPFLST 1999-2017FXST 1999-2017FXD 1999-2017Additional Information UOM1 - SET ManufacturerMotorshop OriginImported 2025...

V-Twin - 10-0892 - Connecting Rod AssemblyDescriptionKit includes new rods, crank pin, nuts, cages and standard rollers fitted and assembled.Piston pin bushings are installed and honed for stock wrist pin. Fits:XL 2004-2022Additional Information UOM1 -...

V-Twin - 10-0891 - Connecting Rod AssemblyDescriptionKit includes new rods, crank pin, nuts, cages and standard rollers fitted and assembled.Piston pin bushings are installed and honed for stock wrist pin. Fits:XL 2000-2003Additional Information UOM1 -...

V-Twin - 10-0890 - Connecting Rod AssemblyDescriptionAssembly includes new rods, crank pin, nuts, cages and standard rollers fitted and assembled.Piston pin bushings are installed and honed for stock wrist pin. Fits:XL 1986-1999Additional Information ...

V-Twin - 10-0881 - Connecting Rod KitDescriptionKit includes new rods, crank pin, nuts, cages and standard rollers fitted and assembled.Piston pin bushings are installed and honed for stock wrist pin. Fits:XL 2000-2003Additional Information UOM1 - KIT ...

V-Twin - 10-0857 - Cam Cover PolishedDescriptionPolished cam cover include bushings for cams for electric start models. Fits:XL 1986-1990Additional Information UOM1 - EA FinishPolished ManufacturerMotorshop OriginImported

V-Twin - 10-0856 - Left Side Crankcase Bearing SleeveDescriptionConverts 2003-up TC-88 models from a roller bearing to a Timken tapered bearing.Bearing is sold separately. Fits:FLST 2003-2017FXST 2003-2017FLT 2003-2016FXD 2003-2017Additional Information ...

V-Twin - 10-0843 - Panhead Left Side Engine CaseDescriptionAccurately cast replacement Panhead left side engine case, wilth blank number boss.Left case utilizes loose roller bearings and cages. For Panhead 61" or 74" applications. Cylinder deck height...

V-Twin - 10-0830 - Connecting Rod Race Set .005 OversizeDescriptionSets are made from 52100 steel and hardened. Fits:FXST 1984-1998FXR 1982-1994FLT 1979-1998FX 1971-1984EL 1936-1940FL 1941-1984FXD 1991-1998FLST 1986-1998Additional Information UOM1 - SET...

V-Twin - 10-0829 - Connecting Rod Race Set .010 OversizeDescriptionSets are made from 52100 steel and hardened. Fits:FXST 1984-1999UL 1937-1948FXD 1991-1999FLST 1986-1999FX 1971-1984FLT 1979-1999EL 1936-1940FL 1941-1984FXR 1984-1994Additional Information...

V-Twin - 10-0828 - Connecting Rod Race Set .001 OversizeDescriptionSets are made from 52100 steel and hardened. Fits:FXST 1984-1999UL 1937-1948FXD 1991-1999FLST 1986-1999FX 1971-1984FLT 1979-1999EL 1936-1940FL 1941-1984FXR 1984-1994Additional Information...

V-Twin - 10-0827 - Connecting Rod Race Set .010 OversizeDescriptionSets are made from 52100 steel and hardened.Use .010 oversize race when large end of rod is worn and a standard race will not have proper press fit for assembly. Fits:XL...

V-Twin - 10-0826 - Connecting Rod Race Set .002 OversizeDescriptionSets are made from 52100 steel and hardened. Fits:FXST 1984-1999UL 1937-1948FXD 1991-1999FLST 1986-1999FX 1971-1984FLT 1979-1999EL 1936-1940FL 1941-1984FXR 1984-1994Additional Information...

V-Twin - 10-0825 - Left Side Engine CaseDescriptionKnucklehead left side engine case is sand cast as original, number boss is blank. The case has updated design to accept 1940-1954 case bushing.The serial number pad is 5/16" wide and 2-1/4" long, and the...

V-Twin - 10-0809 - Jims Connecting Rod Race SetDescriptionRod race set is made from 52100 steel and hardened.Set of three. Fits:FXST 1984-1998UL 1937-1948FXR 1982-1994FLT 1979-1998FX 1971-1984EL 1936-1940FL 1941-1984FXD 1991-1998FLST 1986-1998Additional...

V-Twin - 10-0799 - 6 Volt Distributor Housing Bushing SetDescription6 volt bushing for single point distributor manual advance models, is machined of solid brass Fits:FL 1941-1969WL 1937-1951GE 1937-1973UL 1937-1942EL 1936-1952Additional Information OEM...

V-Twin - 10-0798 - Chrome Nose Cone Cam CoverDescriptionCover for Big Twin models features installed bushings and includes seal.Include hardware and gasket. Fits:FXD 1993-1999FXST 1993-1999FXR 1993-1994FLST 1993-1999FLT 1993-1999Additional Information ...

V-Twin - 10-0797 - Replica Pinion Right Side Case Race StandardDescriptionStandard replica pinion right side case race is machined and ground to factory specifications and features 360  oiling groove.*NOTE: Can also be used on 1958-1987 models but will...

V-Twin - 10-0791 - Cam Cover ChromeDescriptionChrome cam cover include bushings for cams for electric start models. Fits:XL 1986-1990Additional Information UOM1 - EA FinishChrome ManufacturerMotorshop OriginImported 2025 Catalog Pages845

V-Twin - 10-0787A - Roller Bearing Set CagesDescription2 upgraded factory style roller bearing cages. Fits:FL 1941-1954EL 1940-1952Additional Information OEM No.24646-54 UOM1 - SET ManufacturerMotorshop OriginImported

V-Twin - 10-0787 - Roller Bearing Set with CagesDescriptionBearing set is a 1954 factory style upgrade, which is used on the right side comes with 2 narrow cages and uses a large outer diameter roller, 1/4".The spacer is .434" wide, we are eliminating...

V-Twin - 10-0766 - Connecting Rod Wrist Pin BushingDescriptionBushing for connecting rod wrist pin. Bushing is machined from bronze alloy, with an incredible hardness rating. This bushing is a must for rebuild and high performance applications.*NOTE*...

V-Twin - 10-0765 - Connecting Rod Wrist Pin BushingDescriptionAmpco 45 standard bushing for wrist pin. Bushing is machined from a bronze alloy. This bushing is a must for a rebuild and high performance application.*NOTE* Inside diameter must be reamed to...

V-Twin - 10-0760 - Connecting Rod Wrist Pin Bushing SetDescriptionStandard bushings for piston pin.Set of two. *NOTE* Inside diameter must be reamed to proper size after installation. Fits:XL 1957-UPK 1952-1956WL 1929-1952Additional Information OEM No...

V-Twin - 10-0759 - Connecting Rod Wrist Pin Bushing SetDescription.010 bushings for piston pin.Set of two. *NOTE* Inside diameter must be reamed to proper size after installation. Fits:FXST 1984-1998FXR 1982-1994FLT 1979-1998FX 1971-1984EL 1936-1940FL...

V-Twin - 10-0758 - Connecting Rod Wrist Pin Bushing SetDescription.005 oversize bushings for piston pin.Set of two. *NOTE* Inside diameter must be reamed to proper size after installation. Fits:FXST 1984-1998FXR 1982-1994FLT 1979-1998FX 1971-1984EL...

V-Twin - 10-0757 - Connecting Rod Wrist Pin Bushing SetDescription.002 bushings for Piston pin.Set of two. *NOTE* Inside diameter must be reamed to proper size after installation. Fits:FXST 1984-1998FXR 1982-1994FLT 1979-1998FX 1971-1984EL...

V-Twin - 10-0756 - Connecting Rod Wrist Pin Bushing SetDescriptionStandard bushings for piston pin.Set of two. ...

V-Twin - 10-0741 - Brake Crossover Lever Shaft Bushing SetDescriptionBushings are for mechanical brake crossover lever shafts.Sold as a pair. Fits:EL 1936-1940FL 1941-1957UL 1938-1948Additional Information OEM No.47755-31 UOM1 - SET ...

V-Twin - 10-0740 - Rear Brake Backing Plate Cam BushingDescriptionBushing for mehanical brake rear backing plate cam. Bushing is standard size. Fits:UL 1937-1948EL 1936-1940FL 1941-1957Additional Information OEM No.41685-37 UOM1 - EA LocationRear ...

V-Twin - 10-0717 - Distributor Housing BushingDescriptionBushing for single point distributor manual advance models.. Fits:FL 1941-1969WL 1937-1951GE 1937-1973UL 1937-1942EL 1936-1952Additional Information OEM No.32525-36A UOM1 - EA ...

V-Twin - 10-0699 - 4-Finned Panhead Cam Cover CastDescriptionPanhead cam cover with a 4-finned design includes bushings installed and is forged aluminum with cast finish.Cam cover bushings must be checked and fitted (reamed) for final assembly Check end...

V-Twin - 10-0698 - OE Engine Case Right Bearing Assembly BlueDescriptionOE blue engine case right bearing assembly. Fits:FLST 1987-1998FXR 1987-1994FXST 1987-1998FXD 1991-1998FLT 1987-1998Additional Information OEM No.24643-87A UOM1 - EA ...

V-Twin - 10-0684 - 4-Finned Panhead Cam Cover PolishedDescriptionFL polished Panhead cam cover with a 4 rib design includes bushings installed.Accepts 1/4" generator screws. Include 1954-62 type pinion bushing OEM#25585-54. Cam cover bushings must be...