V-Twin - 30-0317 - 2-1/4 inch Steel Pipe BafflerDescriptionPipe baffler fits inside straight pipe. Bafflers are like the original Snuff-or-Not, which is a washer that can be turned to baffle position.*Baffler diameter denotes the size of the pipe into...

V-Twin - 30-0295 - Exhaust Drag Pipe Set CurvedDescriptionWyatt Gatling curve exhaust set is chrome plated and includes mounting bracket. The 2" outer diameter has sweeping curves for maximum flow. These are stepped up to 2" from 1-3/4" at the header.May...

V-Twin - 30-0257 - Exhaust Port FlangeDescriptionChrome set of flanges.Sold as a pair. Fits:FLT 1984-2016FXD 1991-2017XL 1986-UPFLST 1986-2017FXST 1984-2017FXR 1984-1994Additional Information OEM No.65328-83 UOM1 - SET ManufacturerWyatt Gatling ...

V-Twin - 30-0217 - Steel 2 inch Pipe Baffle SetDescriptionSteel baffle pipe set fits inside straight pipes. Baffles that are 2" denotes the size of the pipe into which they fit. Baffles have an outer diameter of the widest point of 1-5/8" and are 8" long...

V-Twin - 30-0216 - Steel 1-3/4 inch Pipe Baffle SetDescriptionSteel pipe baffle set fits inside straight pipes. Baffles that are 1-3/4" denotes the size of the pipe into which they fit. Baffles are 8" long.Baffles are easily installed by drilling a...

V-Twin - 30-0205 - Exhaust Flange KitDescriptionExhaust flange kit with snap rings and tapered mesh gaskets.Exhaust flange kit so when you buy new pipes, there is no need to take your old flanges off your old pipes. These exhaust flange kits are complete...

V-Twin - 30-0188 - Chrome Exhaust Header SetDescriptionChrome exhaust header set consists of a front pipe and a rea r pipe for solo models. Fits:WL 1937-1952Additional Information OEM No.65490-41 UOM1 - SET ManufacturerV-Twin OriginUSA

V-Twin - 30-0187 - Raw Exhaust Header SetDescriptionRaw exhaust header set consists of a front pipe and a rear pipe for solo models.*NOTE: Order clamps, muffler, flex covers or any other pieces needed separately. Fits:WL 1937-1952Additional Information ...

V-Twin - 30-0184 - 45 inch Replica MufflerDescription45" Replica black muffler Fits:WL 1932-1952Additional Information UOM1 - EA MeasurementsAdditional InformationBody Diameter: 2-1/2" ManufacturerWyatt Gatling OriginImported 2025 Catalog...

V-Twin - 30-0183 - 45 inch WL Bat Tail Muffler ChromeDescription45" WL chrome bat tail replacement muffler. Fits:G 1937-1950Additional Information OEM No.1035-41 UOM1 - EA MeasurementsAdditional InformationInner Diameter: 1-7/32"Outer Diameter:...

V-Twin - 30-0182 - 45 inch WL Bat Tail Muffler BlackDescription45" WL black bat tail replacement muffler.The inner and outer diameter where the muffler attached to the header pipe is 1-3/4" i.d. and 1-3/8" o.d. Fits:WL 1937-1950Additional Information ...

V-Twin - 30-0170 - Chrome MufflerDescriptionChrome muffler with a 2 1/2" diameter x 24" long body has a 1 3/4" outer diameter inlet, and is 32" long overall.Muffler features an indent on the back side near the inlet to avoid transmission adjustment screw...

V-Twin - 30-0169 - Black MufflerDescriptionBlack muffler with a 2 1/2" diameter x 24" long body has a 1 3/4" outer diameter inlet, and is 32" long overall. Fits:VL 1930-1936Additional Information OEM No.1001-30 UOM1 - EA ManufacturerWyatt Gatling ...

V-Twin - 30-0168 - UL 3 Piece Exhaust System Set ChromeDescriptionChrome exhaust system is a 3 piece set with a 1-3/4" inlet.*NOTE: Y-pipe not included. Must order separately, a Y-pipe or muffler with built in Y-pipe to complete exhaust system. Fits:UL...

V-Twin - 30-0167 - UL 3 Piece Exhaust System Set RawDescriptionRaw steel finish exhaust system is a 3 piece set with 1-3/4" inlet.*NOTE: Y-pipe not included. Must order separately, a Y-pipe or muffler with built in Y-pip to complete exhaust system...

V-Twin - 30-0105 - Exhaust Repair Ports AluminumDescriptionAluminum exhaust repair ports are to be welded on broken or damaged heads.Sold in a quantity of 2. Fits:FX 1971-1984FL 1966-1984Additional Information UOM1 - SET ManufacturerV-Twin ...

V-Twin - 30-0103 - Wyatt Gatling Steel 2 inch Pipe Baffle SetDescriptionPipe baffle set fits inside straight pipes. Baffles that are 2" denotes the size of the pipe into which they fit. Baffle s are 4" long.Set is easily installed by drilling a single...

V-Twin - 30-0102 - Steel 1-3/4 inch Pipe Baffle SetDescriptionSteel pipe baffles will fit into straight pipes. Baffles that are 1-3/4" denotes the size of the pipe into which they fit. Baffles are 4" long.Set is easily installed by drilling a single hole...

V-Twin - 30-0101 - Steel 1-1/2 inch Pipe Baffle SetDescriptionPipe baffle set fits inside straight pipes. Baffles that are 1-1/2" denotes the size of the pipe into which they fit. Baffles are 4" long.Set is easily installed by drilling a single hole onto...

V-Twin - 30-0098 - Exhaust Repair Ports AluminumDescriptionAluminum exhaust repair ports is to be welded on broken or damaged heads.Sold in a quantity of 2. **CAUTION: These exhaust products are not legal...

V-Twin - 30-0094 - Chrome 1 inch Frame Exhaust ClampDescriptionExhaust clamp is 1" to fit frame for exhaust bracket mounting to frame tube. Fits:Custom application for exhaust bracket moutingAdditional Information UOM1 - EA ManufacturerPaughco ...

V-Twin - 30-0080 - Wyatt Gatling Exhaust Drag Pipe Set Straight Cut EndsDescriptionChrome exhaust drag pipe set with straight cut ends have a 1-3/4" diameter and are 38" long.Pipes are without heat shields and oxygen sensor ports. Pipes mount to stock...

V-Twin - 30-0071 - Wyatt Gatling Exhaust Drag Pipe Set Slash CutDescriptionDrag pipes with oxygen sensor port and slash cut ends features a chrome finish. These pipes have a 1-3/4" diameter and are 34" long.These pipes may be used on 2004-2006 models if...

V-Twin - 30-0070 - Wyatt Gatling Exhaust Drag Pipe Set Slash CutDescriptionChrome exhaust drag pipes with slash cut ends are 36" long with a 1-3/4" diameter.Pipes mount to stock bracket and are sold without heat shields and oxygen sensor ports. ...

V-Twin - 30-0050 - 2-1/4 inch Baffle Ring SetDescriptionBaffle ring set is for Samson extreme series exhaust pipe set with a 2-1/4" diameter. Creates back pressure.Will not fit with a baffle installed. Sold in a quanity of 2. **CAUTION: These...

V-Twin - 30-0022 - Straight Down Drag Pipe Set Chrome with Heat ShieldsDescriptionStraight down drag pipe set is chrome and features slash cut ends with heat shields included.Pipe features a 1-3/4" diameter tubing and 18mm O2 sensor bungs that are welded...

V-Twin - 30-0021 - Straight Down Drag Pipe Set Black with Heat ShieldsDescriptionStraight down drag pipe set is black and features slash cut ends with heat shields included.Pipe features a 1-3/4" diameter tubing and 18mm O2 sensor bungs that are welded...

V-Twin - 30-0020 - Black Servi-Car MufflerDescriptionReplica style muffler for a servi-car.Front inlet clamp is included. Order all other hardware separately. Fits:G 1936-1973Additional Information OEM No.65309-51 UOM1 - EA MeasurementsAdditional...

V-Twin - 30-0003 - Custom Exhaust DonutDescriptionCustom exhaust donut has an outer diameter that measures e 6" and an inner diameter that is 2-1/8". These donuts are used to create custom exhaust.Using a full 360  bend, this allows the donut to be cut...

V-Twin - 30-0002 - Custom Exhaust DonutDescriptionCustom exhaust donut has an outer diameter that measures 5-1/4" and an inner diameter that is 1-7/8". These donuts are used to create custom exhaust.Using a full 360  bend, this allows the donut to be cut...

V-Twin - 2999-5 - Rear Brake Switch Pull KitDescriptionRear brake switch pull kit features a parkerized bracket, stud, wing nut and pull wire and a black spring. Fits:FL 1940-1957Additional Information UOM1 - KIT ManufacturerColony OriginUSA 2025...

V-Twin - 2998-5 - Rear Brake Switch Pull KitDescriptionRear brake switch pull kit features a cadmium plated bracket, stud and wing nut, parkerized pull wire and a black spring. Fits:FL 1940-1957Additional Information UOM1 - KIT ManufacturerColony ...

V-Twin - 2958-4 - Parkerized Brake Hand Lever Screw KitDescriptionParkerized hand brake lever screws and washer.Includes 1 of each of the following: OEM #1456-28 Screw, OEM #4157-28 Biter Washser, OEM #4154-28 Extension Screw and OEM #032 Fillister Screw...

V-Twin - 2952-6 - Slotted 1/4 inch- 24 Thread NutDescriptionEngine case nut is slotted with 1/4"-24 thread and is nickel plated. Fits:Special Application on pre 1930 casesAdditional Information UOM6 - PK ManufacturerColony OriginUSA 2025 Catalog...

V-Twin - 2929-2 - Front Axle Nut and Washer Kit Chrome PlatedDescriptionFront axle nut and lock washer kit features a chrome plated finish. Fits:K 1952-1956KH 1952-1956XL 1957-1972XLH 1957-1972XLCH 1957-1972Additional Information OEM No.43886-52 UOM1 -...

V-Twin - 2910-6 - Parkerized Rear Stand Mount KitDescriptionParkerized rear stand mount kit. Fits:W 1937-1937EL 1936-1936UL 1937-1937Additional Information UOM1 - KIT FinishParkerized ManufacturerColony OriginUSA 2025 Catalog Pages623

V-Twin - 2901-4 - Crank Pin Nut Lock Plate KitDescriptionCrank pin nut lock plate kit for Big Twin models.Mounting screws included. Fits:FX 1936-1940FL 1936-1940Additional Information OEM No.369-36 UOM1 - KIT ManufacturerColony OriginUSA 2025...

V-Twin - 29-1131 - Exhaust Drag Pipes Fishtail ChromeDescriptionDrag pipes with fishtail ends are chromed with a upsweep. Pipes have a 1-3/4" diameter.Bracket is included. Baffles and cylinder mount are not included. **CAUTION: These exhaust...

V-Twin - 29-1104 - Exhaust System ChromeDescriptionChrome exhaust system comes in a 4 piece set with build in Y and uses standard 1-3/4" inlet mufflers. Fits:UL 1941-1948ULH 1941-1948Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025...

V-Twin - 29-1103 - Exhaust System RawDescriptionRaw exhaust system comes in a 4 piece set with build in Y and uses standard 1-3/4" inlet mufflers.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight,...