V-Twin - 31-0545 - Headlamp Bracket for Spring ForkDescriptionDual spring fork headlamp bracket to fit Bates type bottom mount or custom applications. Fits:Custom applicationAdditional Information UOM1 - EA ManufacturerPaughco OriginUSA 2025 Catalog...

V-Twin - 31-0528 - Replica Tool Box Mounting BracketDescriptionReplica tool box mounting bracket is a one piece design that fits all rigid frames and stock for years designated.Includes two square nuts welded in place with 5/16-24 threads to use with...

V-Twin - 31-0527 - Tool Box Mounting BracketDescriptionTool box mounting bracket mounts kidney tool box to FX 1977-1984 models on the rear passenger peg block on left sideOrder hardware separately. Fits:Custom applicationAdditional Information UOM1 - EA...

V-Twin - 31-0526 - Tool Box BracketDescriptionZinc tool box bracket for the right side. Fits:WL 1941-1952Additional Information OEM No.64450-41 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages814

V-Twin - 31-0525 - Tool Box Mount KitDescriptionTwo piece tool box mount is used as a replacement for mounts on stock and custom rigid frames. Mounts tool box higher than one piece style bracket. Fits:UL 1936-1948FL 1948-1953EL 1936-1952Additional...

V-Twin - 31-0523 - Headlamp Mount Bracket ChromeDescriptionPaughco chrome headlamp bracket features indent on rear side of eye bolt mount stud hole.Mount holes measures 4" center to center. Fits:Custom applicationAdditional Information UOM1 - EA ...

V-Twin - 31-0493 - Circuit Breaker Bracket for Two BreakersDescriptionCircuit breaker bracket for two circuit breakers allows standard 15 or 30 amp breakers to snap firmly in place.Bracket has 1/4" holes, 5" apart and can be mounted to oil tank bracket...

V-Twin - 31-0490 - Circuit Breaker Bracket for Three BreakersDescriptionCircuit breaker bracket for three circuit breakers allows standard 15 or 30 amp breakers to snap firmly in place.Bracket has 1/4" holes, 5" apart and can be mounted to oil tank...

V-Twin - 31-0487 - Zinc Plated Ignition Coil Mount BracketDescriptionIgnition coil bracket is zinc plated.*NOTE: Bracket allows the installation of early 1930-1947 ignition coils on later 1948-1965 moseld with (2) stud on frame. Fits:G...

V-Twin - 31-0480 - Chrome Rear Kickstand CatchDescriptionChrome rear kickstand catch is a stock OE replacement.*NOTE: Screws not included. Fits:UL 1937-1946FL 1941-1946EL 1937-1940Additional Information OEM No.49580-36 UOM1 - EA FinishChrome ...

V-Twin - 31-0475 - Motor Mount Frame Spacer FrontDescriptionFront motor mount frame spacer will allow installation of a Knucklehead or Flathead engine in a 1948-1984 frame.The mount holes measure 3-1/4" center-to-center. *NOTE:...

V-Twin - 31-0465 - 5-3/4 inch Round Headlamp Mount ZincDescriptionSpring fork round headlamp mount is zinc 5-3/4" and 45.5mm wide at mount*NOTE: Use FXSTS 5-3/4" headlamps for correct fit. Fits:FXSTS 1993-UPAdditional Information OEM No.67892-93 UOM1 -...

V-Twin - 31-0450 - Muffler Inlet Clamp SetDescriptionReplica chrome muffler end clamps. These clamps are Replica replacement. Fits:FLT 1985-1994Additional Information OEM No.65722-85B UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages85

V-Twin - 31-0431 - XL Air Cleaner Breather Kit ChromeDescriptionXL cleaner breather kit features a chrome finish. Breather kit is to fit custom teardrop style air cleaner to the motor with the internal breathing system.Includes chrome breather manifold,...

V-Twin - 31-0425 - Replica Chrome Finned Exhaust Clamp SetDescriptionReplica chrome deco finned exhaust clamp set fits Panhead models.Sold in a quantity of 2. Fits:EL 1948-1952FL 1948-1952Additional Information OEM No.65519-48 UOM1 - SET ...

V-Twin - 31-0422 - Chrome Ignition Coil StrapDescriptionIgnition coil strap has a chrome finish. Fits:FX 1971-1977FL 1965-1977Additional Information OEM No.31727-72 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages672

V-Twin - 31-0412 - Replica Tool Box Cross BracketDescriptionReplica three hole tool box cross bracket Fits:FL 1941-1947Additional Information OEM No.47386-41 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages625

V-Twin - 31-0410 - Chrome Top Front Motor MountDescriptionTop motor mount chrome attaches the top front of the engine to the frame on 1200 XL models.Mount features chrome edges however chrome on the top portion is not a polished chrome. Fits:XL...

V-Twin - 31-0406 - Tool Box Two Hole Cross BracketDescriptionTool box cross bracket has two holes. Fits:FL 1941-1952Additional Information OEM No.47386-41 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages625

V-Twin - 31-0394 - Billet Top Motor Mount ChromeDescriptionBillet top motor mount with holes features a chrome finish.The two holes are drilled and tapped 5/16-18UNC with a center distance of 2 Fits:FX 1979-1984FLST 1986-2005FL 1979-1984FXST...

V-Twin - 31-0378 - Dash Mount Cross BracketDescriptionZinc dash mount cross bracket features center hole for mounting. Bracket allows mounting of dash kits with GPS speedometer and tachometer to 1973-1984 FXE models.*NOTE: Accepts dash mount kit to allow...

V-Twin - 31-0376 - Black Oxide 1-1/4 inch Exhaust inchP inch Clamp SetDescription1-1/4" P style exhaust clamp set attaches pipes to frame and features a black oxide finish.Sold as a set of two. Fits:Custom applicationAdditional Information UOM1 - SET ...

V-Twin - 31-0370 - Black Rear Kickstand CatchDescriptionBlack rear kickstand catch with screws is a stock OE replacement. Fits:UL 1937-1946FL 1941-1946EL 1937-1940Additional Information OEM No.49580-36 UOM1 - EA FinishBlack ManufacturerV-Twin ...

V-Twin - 31-0358 - Cylinder Urn Bracket BlackDescriptionCylinder urn bracket will support cylinder for use as an urn features a black powder coated steel. Angled for plaque to be applied. Fits:Custom applicationAdditional Information UOM1 - EA ...

V-Twin - 31-0357 - Mini Key Switch Bracket Stainless SteelDescriptionMini key switch bracket features a stamped stainless steel construction. Fits:Custom applicationAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog...

V-Twin - 31-0356 - Top Motor Mount ZincDescriptionZinc plated steel top motor mount features choke tab. Fits:FX 1971-1972FL 1977-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages483

V-Twin - 31-0330 - Headlamp Mount Bracket Adapter Bar ChromeDescriptionChrome adapter bar allows use of 7" type brackets on FX and XL models. Fits:Custom application for 7" type bracketsAdditional Information UOM1 - EA ManufacturerV-Twin ...

V-Twin - 31-0319 - Stainless Steel Muffler Body ClampDescriptionStainless steel clamp is for 2-1/2" muffler body.for 2.5" Diam muffler. Sold as a pair. Fits:K 1952-1956XL 1957-1976Additional Information OEM No.65279-57 UOM1 - SET ManufacturerV-Twin ...

V-Twin - 31-0318 - 1-7/8 inch Muffler End Clamp Set Stainless SteelDescriptionStainless steel muffler end clamp has an inner diameter of 1-7/8" and includes bolt.Sold as a pair. Fits:Custom applicationAdditional Information OEM No.65275-57 UOM1 - SET ...

V-Twin - 31-0308 - Front Muffler Clamp Stainless SteelDescriptionStainless steel front muffler clamp for Hummer models Fits:Hummer 1957-1965Additional Information OEM No.65523-57 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages820

V-Twin - 31-0303 - Crossover Exhaust Pipe Clamp SetDescriptionPipe clamps for crossover exhaustsSold in a quantity of 2. Fits:XL 1975-1980Additional Information OEM No.65412-75 UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages942

V-Twin - 31-0301 - Stainless Steel 1-7/8 inch Muffler End ClampDescriptionStainless steel muffler end clamp has a inner diameter of 1-7/8" with bolt included. Fits:Custom applicationAdditional Information OEM No.65275-57 UOM1 - EA ManufacturerV-Twin ...

V-Twin - 31-0294 - Top Engine Mount Stabilizer LinkDescriptionTop engine mount stabilizer link features a steel body with a plunger and with urethane dampening which together acts as a mini-shock absorber. Fits:FXD 1995-2017Additional Information OEM No...

V-Twin - 31-0288 - Bates Headlamp Mounting Block ChromeDescriptionBates chrome headlamp mounting block fits FLST models. Fits:FLST 1986-1996Additional Information OEM No.67768-86 UOM1 - EA ManufacturerBates OriginImported 2025 Catalog Pages1108

V-Twin - 31-0286 - Front Engine Limiter KitDescriptionLimiter kit dampens extreme movement on front motor mount cushion. Fits:FXR 1982-1994FLT 1979-2008Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages105

V-Twin - 31-0280 - 1-7/8 inch Muffler Hanger Clamp SetDescriptionMuffler hanger clamps with bolts included. 1-7/8" inner diameter to fit fishtail straight pipes.Attaches 3-1/2" diameter muffler to 1995-16 Touring. Sold in a quantity of 2. ...

V-Twin - 31-0278 - Bates Headlamp Mounting Block ChromeDescriptionBates chrome headlamp mounting block Fits:FLST 1997-UPAdditional Information OEM No.67768-97 UOM1 - EA ManufacturerBates OriginImported 2025 Catalog Pages1108

V-Twin - 31-0276 - Distributor Wire ClipDescriptionDistributor wire clip replaces stock OE. Fits:FL 1941-1965EL 1936-1940UL 1938-1948Additional Information OEM No.9971 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages668

V-Twin - 31-0270 - Chrome 1-5/8 inch Muffler Body and End Clamp SetDescriptionChrome 1-5/8" muffler body and end clamp replaces stock OE Indian Chief rear P clamp for attaching the muffler to 1-3/4" tubing or mounting of mufflers.Sold in a quantity of 2...

V-Twin - 31-0267 - Timer Cable ClampDescriptionTimer cable to frame clamp. Fits:FL 1946-1969Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages668