Harley Davidson Parts

Belt Drives Ltd. - Kevlar Clutch Kit fits:'68 - 'E84 Big Twins Clutch plates are made of 6061-T6 or high tempered steel with Belt Drives Ltd. race proven kevlar material. Each plate design was tested so that the maximum performance is achieved...

V-Twin Captain America Gas Tank 2.2 Gallon - Single Bayonet Style Cap Replica gas tank has two 1/4" National Pipe Thread petcock outlets, and a fuel capacity of 2.2 gallons. This Captain America tank has straight mount tabs on the front and rear, and a...

CNC-machined aluminum backing plate Internal rubber breather tubers to eliminate oil leakage Internal power cone design for smooth, laminar air flow Innovative conical design for improved knee clearance Contrast Cut finish starts with a polished...

CNC-machined aluminum backing plate Internal rubber breather tubers to eliminate oil leakage Internal power cone design for smooth, laminar air flow Innovative conical design for improved knee clearance Contrast Cut finish starts with a polished...

CNC-machined aluminum backing plate Internal rubber breather tubers to eliminate oil leakage Internal power cone design for smooth, laminar air flow Innovative conical design for improved knee clearance Contrast Cut finish starts with a polished...

V-Twin Flanders Riser Set 3-1/2" - Polished Brass Features: Flanders 3-1/2" riser set is short style with a 3-1/2" center to center rise. Features a forged solid brass construction for greater density and are polished for a smoother surface finish...

Burly Brand - Slammer Kits fits '04-'15 Sportster Models This is a complete lowering kit which comes with 10.5" shocks with chrome springs and covers (unless noted) and fork springs. Available in your choice of a black or chrome finish...

S&S Super E Carburetor Body Rebuild Kit Body rebuild kits for Super E and G carbs contain throttle shaft nuts, nylon washers, and accelerator pump boot. Does not include throttle shaft bushings since these carbs have stainless steel throttle shaft...

Available for 12V applications in a black finish Updated end plate has an extra set of mounting holes to align the fins on the regulator with the fins on the engine If you have purchased a Cycle Electric generator since 1984 it may have the...

Drag Specialties - DS720264 - Dash Panel for Fat Bob-Style Tank - ChromeFeaturesDash panel cover is finished in chrome and covers the gap found on 3-1/2- and 5-gallon Fat Bob-style tanksFits custom conversions and FX models with split tanks, as well as...

Drag Specialties - DS719947 - Turn Signal Lens Grille - Chrome Features Dress up any OEM flat-style turn signal with these beautifully chrome-plated molded plastic lens grilles Universal mounting method allows the same grilles to be mounted to...

Drag Specialties - DS719933 - Fender Tip Light - AmberFeaturesDOT compliantThese tip lights are a perfect fit on OEM and aftermarket front and rear fendersClear fender light comes with amber and red bulbReplacement lenses available separatelyReplacement...

Drag Specialties - DS719932 - Fender Tip Light - RearFeaturesDOT compliantThese tip lights are a perfect fit on OEM and aftermarket front and rear fendersClear fender light comes with amber and red bulbReplacement lenses available separatelyReplacement...

Drag Specialties - DS530604 - Brake Pedal Rubber - Black - FLFeaturesRubber brake pedal replacements for OEM that can also be used on foot clutchesReplacement Part for OEM Number(s):4241606,4241683SpecsUnitsEachTypeBrake PedalColor/FinishBlackProduct...

Drag Specialties - DS530605 - Brake Backing Plate - Chrome - FLSTFeaturesRear brake lever mounting bracket for FLSTReplacement Part for OEM Number(s):DS530605SpecsBase FinishChromeProduct NameMounting BracketTypeBrake...

Drag Specialties - DS530603 - Brake Pedal - Chrome - FLH/FLTFeaturesIncludes zerk fitting and bushingReplacement Part for OEM Number(s):4240787BSpecsRiding StyleStreetUnitsEachTypeRearBase ColorSilverBase FinishChromeProduct NameBrake...

Drag Specialties - DS530505 - Rear Caliper Stabalizer - 72-80 FLFeaturesSwingarm-mounted stabilizerSpecsRiding StyleStreetUnitsEachMounting PositionRearColor/FinishChromeProduct NameStabilizerTypeBrake CaliperFitment1978-1980 Harley-Davidson 1200 Electra...

Drag Specialties - DS393500 - Steel Fender - Rear - 6"Features16-gauge, deep-drawn steelFender is 41" L x 1-1/4" DFender bracket not includedRaw steel finishSpecsBase FinishUnfinishedHeight Imperial12.00''Fender Width Imperial6''Riding...

Drag Specialties - DS393497 - Fat Bob-Style Rear Fender - Right-Hand ChainFeaturesUniversal custom fender with chain cutawayMeasures 38" L x 7" W x 5-1/2" DRaw steel finishSpecsContour Length Imperial38''Height...

Drag Specialties - DS393496 - Fat Bob-Style Rear Fender - Left-Hand ChainFeaturesUniversal custom fender with chain cutawayMeasures 38" L x 7" W x 5-1/2" DRaw steel finishSpecsUnitsEachBase FinishUnfinishedTypeLeft-Hand ChainMounting PositionRearProduct...

Drag Specialties - DS393493 - Front Fender - Raw - SteelFeaturesRaw stamped-steel-construction fender maintains a low-tire profile and comes complete with chrome mountsAttach with OE hardwareReplacement Part for OEM Number(s):5917688SpecsProduct...

Drag Specialties - DS393492 - Front Fender - Raw - SteelFeaturesRaw stamped-steel-construction fender maintains a low-tire profile and comes complete with chrome mountsAttach with OE hardwareReplacement Part for OEM Number(s):5992480ASpecsRiding...

Drag Specialties - DS393482 - XLX-Style Front Fender with Chrome Side Braces - SteelFeaturesSteel construction with chromed side bracesDesigned for a close fit on 19" wheelSpecsMounting PositionFrontStraight Line Length Imperial22-7/8''Contour Length...

Drag Specialties - DS393489 - Hinged Read Fender - Raw - SteelFeaturesHigh quality with a raw steel smooth finish and no taillight holeReplacement Part for OEM Number(s):5960465ASpecsMounting PositionRearColor/FinishUnfinishedProduct NameFenderRiding...

Drag Specialties - DS393470 - Wide Glide-Style Front Fender with Chrome Mounting Brackets - For 19" or 21" WheelFeaturesCustom Wide Glide-style front fender with chrome mounting bracket and raw finishSpecsStyleGlideRiding...

Drag Specialties - DS393488 - Replacement Front FenderFeaturesDesigned specifically as an OE replacementAlso fits FLT and FLHT models when additional trim holes are drilled.Replacement Part for OEM Number(s):5900058,5900081,5910082,5910179ASpecsMounting...

Drag Specialties - DS380068 - OE Rear Fender - Raw Steel - '90-'95 FLSTFFeaturesAn exact steel replacementPre-drilled holes for fender struts, taillight and license plate mountReplacement Part for OEM Number(s):5959689SpecsUnitsEachMounting...

Drag Specialties - DS380067 - Rear Fender - Smooth StyleFeaturesFender-mounting holes are drilled for easy installationSpecsMaterialSteelBase FinishUnfinishedContour Length Imperial41-1/4''Color/FinishUnfinishedMounting PositionRearProduct...

Drag Specialties - DS380069 - Smooth Rear Fender - with Taillight Mount/No Turn Signal Mount Indents - SteelFeaturesSteel, one-piece fenders are reproductions of the ones found on 4-speed FL modelsCan also be used as a replacement for the early-style...

Drag Specialties - DS380064 - Replacement Rear Fender - SteelFeaturesSteel constructionPre-drilled for easy installationDirect replacement for stock rear fenderMeasures approximately 7-1/4" wideAccepts the OE taillight assembly or Drag Specialties Custom...

Drag Specialties - DS380056 - Rear Fender - Raw - SteelFeaturesStock replacement with a raw steel finishReplacement Part for OEM Number(s):5990480SpecsMaterialSteelUnitsEachColor/FinishUnfinishedProduct NameFenderBase FinishUnfinishedMounting...

Drag Specialties - DS380061 - Quickbob Rear FenderFeaturesUnique steel fender converts the look of a stock XL rear fender to an FXWG-type bobbed rear fenderUses XL sissy bar side straps, but it is wider so an 8-1/4” FX-style sissy bar back must be...

Drag Specialties - DS380058 - Rear Fender - Stock StyleFeaturesFender-mounting holes are drilled for easy installationReplacement Part for OEM Number(s):5914487ASpecsRiding StyleStreetColor/FinishUnfinishedHeight Imperial11.00''Mounting...

Drag Specialties - DS380057 - Smooth Rear Fender - with Taillight/Turn Signal Mount - SteelFeaturesSteel, one-piece fenders are reproductions of the ones found on 4-speed FL modelsCan also be used as a replacement for the early-style hinged rear fender...

Drag Specialties - DS380043 - Rear Fender - Raw Steel - '73-'85 FXFeaturesUses stock mounts and has a raw steel finishOriginal-style fender with taillight mountReplacement Part for OEM...

Drag Specialties - DS380032 - Custom Quickbob Rear FenderFeaturesWide Glide-style with a raw steel finishAccepts stock fender struts and hardwareOptional chrome license/ taillight bracket; sold separatelySpecsRiding...

Drag Specialties - DS380055 - Smooth Rear Fender - without Taillight/Turn Signal Mount - SteelFeaturesSteel, one-piece fenders are reproductions of the ones found on 4-speed FL modelsCan also be used as a replacement for the early-style hinged rear...

Drag Specialties - DS380038 - Front Fender ReplacementFeaturesOriginal-style fenderChrome fender brackets must be ordered separately.Replacement Part for OEM Number(s):5900773BSpecsContour Length Imperial35-1/2''Product NameFenderUnitsEachHeight...

Drag Specialties - DS373656 - Three-Light Dash Cover - ChromeFeaturesChrome reproduction of the three-light dash found on '63-'65 FL modelsCover is made of chrome-plated steel (base sold separately)Compatible with OEM tanks or Drag Specialties Vintage...

Drag Specialties - DS373645 - Cat Eye Dash Cover - ChromeFeaturesChromed Cat Eye dash coverPlate is for custom applications on '47-'84 modelsBase plate sold separatelyReplacement Part for OEM Number(s):451639,7127039SpecsColor/FinishChromeProduct...