Harley Davidson

James Gasket - Top End Gasket Kit fits '86-'90 Sportster Models (Metal Base and Rocker Cover Gaskets (OEM #17032-86B)) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Made in the USA Kit Includes: Metal Base...

James Gasket - Cam Change Gasket Kit fits '93-'99 Evolution & Big Twin Models Features: Kit includes all necessary gaskets, seals, O-rings and cork washers for doing a cam change Fitment 2000 Harley-Davidson FXR...

James Gasket - Complete Motor Gasket Kit fits '70-'84 Shovelhead Models 4-Speed (Fire-Ring™ Head Gaskets (OEM #17029-70A)) Features: Top-quality gaskets, oil seals, and o-rings necessary to rebuild an XL engine Made in the U.S.A...

James Gasket - Top End Gasket Kit fits '57-'71 Sportster (OEM #17030-57) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Available as complete sets or top-end sets only Made in the...

James Gasket - Top End Gasket Kit fits '84-'91 Big Twin (Cork Rocker Gaskets (OEM #17033-83)) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Made in the USA Kit Includes: 0.045" Head Gaskets with...

James Gasket - Primary Gasket Kit fits '84-'86 Touring & '84-'88 Softail Models w/ Silicone Bead Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Complete Motor Gasket Kit fits '57-'71 XLH, XLCH Models (OEM #17026-71) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Available as complete sets or top-end sets only Made in the...

James Gasket - Transmission Gasket Seal Kit fits '91-'98 Dyna Glide Models (OEM #33031-91) Features: Made in the U.S.A. Fitment 1995-1998 Harley-Davidson Dyna Convertible FXDS-CONV - - 1995-1998 Harley-Davidson Super Glide...

James Gasket - Transmission Gasket/Seal Kit fits '93-'98 FLT/​FLHT Models (OEM #33031-93) Features: Made in the U.S.A. Fitment 1993-1998 Harley-Davidson Electra Glide Classic FLHTC - - 1993-1997 Harley-Davidson Electra Glide...

James Gasket - Oil Pump Metal Gasket/Seal Kit fits '92-'99 Evolution Big Twin Models Features: Comes with new components that allow you to totally rebuild/rebush most oil pumps Made in the USA Fitment 1999 Harley-Davidson FXR...

James Gasket - Transmission Seal Kit fits '84-'93 Big Twin Models Features: Designed for most 4- or 5-speed Big Twin transmissions Made in the U.S.A. Fitment 1993 Harley-Davidson Wide Glide FXDWG - - 1993 Harley-Davidson Low...

Jims - 1746 Lockdown Axle Kit fits '99-'05 Dyna Models Features: Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components Swingarm end caps fit more precisely into the end of the swingarm, providing...

Jims - 1748 Lockdown Axle Kit fits '99-'01 FLHT Model Features: Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components Swingarm end caps fit more precisely into the end of the swingarm, providing...

Jims - 8385 Compensator Nut Retainer fits '12-'13 Twin Cam & Screamin’ Eagle Models (OEM #83935-09A, 40274-08A) Features: Lockplate secures nut into sprocket retainer Incorporated lock tab One piece sprocket retainer for strength Made in...

Jims - 1733 Mega Nut fits '07-'20 Big Twin & '06-'17 Dyna Models Features: Includes machined clamping face tolerance, along with additional locking holes for a more precise and secure way to secure pulley nut Made in the U.S.A...

Jims - 1747 Lockdown Axle Kit fits '86-'04 Sportster Models Features: Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components Swingarm end caps fit more precisely into the end of the swingarm,...

Jims - 943 Ignition Switch Alignment Tool fits '03-'13 Touring & '02-'10 V-Rod Models Features: Also used to position switch in the correct orientation for properly activating the fork lock Proper alignment of the switch will extend the life of...

Jims - 942 Ignition Switch Connector Tool fits '03-'13 Touring & '02-'10 V-Rod Models Features: Slip the dog bone end of tool into the bottom side of connector until it is touching the back end of connector box Then gently pull out the male...

Jims - 778 Ignition Lock Tool fits '06-'17 Dyna Models Features: Locates on ignition switch face nut that holds switch in place to remove or install switch without damage 3/8" drive access hole Made in the U.S.A...

Jims - 944 Ignition Switch Alignment Tool fits '14-'21 Touring Models Features: Also used to position switch in the correct orientation for properly activating the fork lock Proper alignment of the switch will extend the life of the ignition switch...

Jims - 755 O² Sensor Wrench fits '12-'17 Dyna & V-Rod Models Features: Removes and installs O² sensors without removing exhaust pipes Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Low Rider S...

Jims - 981 Cruise Drive/6-Speed Main Drive Gear Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: Holds the main drive gear square to its bearing bore, eliminating any marring of gear or bearings Installs the main drive gear without...

Jims - 986 Cruise Drive/6-Speed Main Drive Gear Bearing/Seal Installer Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a...

Jims - 987 Cruise Drive/6-Speed Main Bearing Installer Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Safely installs new main transmission case bearing; does not remove bearing Holds bearing square to its bore, eliminating any marring...

Jims - 984 Transmission Door Puller fits '07-'17 Big Twin & '06 Dyna Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings...

Jims - 989 Main Drive Gear Sprocket Locknut Wrench fits '07-'21 Big Twin & '06 Dyna Models Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the USA Inner...

Jims - Shifter Shaft Removal Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Loosens and removes both shifter shafts from transmission door, allowing further disassembly of transmission Made in the...

Jims - 939 Sealed Wheel Bearing Tool fits '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-ROD Models Features: Removes and installs 3/4", 1" and 25 mm wheel bearing with or without Anti-Locking Brake System (ABS) Made in the U.S.A...

Jims - 901 Cruise Drive/6-Speed Main Drive Gear Remover Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Removes the main drive gear from the main bearing correctly while in the transmission case Eliminates the need of an arbor press and...

Jims - 911 Cruise Drive/6-Speed Trap Door Bearing Remover/Installer fits '07-'20 Big Twin & '06 Dyna Models Features: Accurately installs and removes lubed ball bearing into transmission trap door No arbor press needed Made in the U.S.A...

Jims - 767 6-Speed Transmission Case Shifter Shaft Seal Installer fits '06-'20 Big Twin & '84-'05 Sportster Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and installs shifter seal to correct...

Jims - 768 5-Speed Transmission Case Shifter Shaft Seal Installer fits '80-'99 Big Twin, '99 Twin Cam, '99-'06 FXST & '99-'05 FLT/F LHT/​FXD Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and...

Jims - 1658 Transmission Shifter Shaft Sleeve Tool fits '06-'20 6-Speed H-D Cruise Drive Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use to install shifter shaft sleeve Made in the...

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 967-4 Installation/Removal Inner Primary Bearing Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also...

Jims - 967-5 Inner Primary Bearing Tool fits '07-'19 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also removes and installs...

Jims - 913 Wheel Bearing Support Plate Tool fits '14-'20 FL w/ Cast Wheels & '10-'20 CVO Models Features: Provides accurate and precise bearing removal and installation without the risk of damage to cast wheels Attaches to the brake rotor...

Jims - 2268 Main Case Seal Installer Tool fits '85-'06 5-Speed Big Twin & Aftermarket 6-Speeds Models Features: Ensures correct alignment, seal protection and depth when installing the seal Made in the...

Jims - 5502 Ultimate Clutch Adjusting Tool fits '85-'20 Big Twins Models w/ Mechanical Clutch Features: Allows the quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change position No more guessing or...