Harley Davidson

V-Twin - M8 Frisco Front Fender fits '18-'24 FLST/FXST Model Frisco front fender is for M8 fat body models featuring a raw finish. Short and quick bolt on installation, requires seat change. Fitment: FLST 2018-2024 FXST 2018-2024

V-Twin - Raw Lower Frame Fender Bracket fits '36-'52 EL, '41-'57 FL Models Lower rear frame fender bracket to be welded on for restoration or repair. Fitment: FL 1941-1957 EL 1936-1952

V-Twin - 4-Speed Transmission 5th Mount fits Custom Application 4-speed transmission 5th mount provides fifth bolt hole for early Transmission cases. Feature a black finish. Fitment: Custom application for 1936 - early 1937 4-speed...

V-Twin - 107" Big Bore Twin Cam Cylinder Kit fits '99-'06 FLST/FXST/FLT/FXD Model 107" Twin Cam big bore cylinder kit includes 10.5:1 piston kit and steel cylinders with black finish. Requires case machining and fits a 4" stroke flywheel...

V-Twin - Solo Seat Mount Kit fits '65-'84 FL, '72-'84 FX Models Solo seat mount kit includes black painted cross bracket, seat "T" and 3 chrome springs. Assembly bolt on, no welding necessary. Fitment: FL 1965-1984 FX 1972-1984

V-Twin - Electronic Speedometer Assembly fits '96-'03 FXST/FLHR/FLST/FXDWG Model (OEM #74461-03A) Electronic speedometer with tachometer. Certain years and models will require separate purchase of correct wiring harness and tachometer adapter...

V-Twin - Chrome Servi Car Rear Hubcap Set fits G '51-'73 Model New Old Stock" Servi-car rear hubcap set features a chrome finish. Fitment: G 1951-1973

Colony - 9701-1 Rocker Feed Line Nipple Parkerized fits '36-'40 EL, '41-'41 FL Models (OEM #33615-36) Parkerized rocker feed line nipple. Fitment: EL 1936-1940 FL 1941-1941

V-Twin - Exhaust Support fits '95-'99 FXST Model (OEM #65459-95) - Chrome Chrome exhaust support mounts stock or custom drag pipes to frame. Fitment: FXST 1995-1999

V-Twin - Corbin Gentry Rigid Bucket Solo Seat fits Custom Application for Rigid Frames Corbin Gentry rigid bucket solo seat is constructed of steel with molded foam and a black naugahyde covering. Base plate is a 5 button design.Purchase or fabricate...

V-Twin - 7" Round Air Cleaner Assembly fits '18-Up FLST/FXST, '17-Up FLT Models - Chrome 7" M8 round air cleaner assembly features a chrome finish. Fitment: FLST 2018-UP FLT 2017-UP FXST 2018-UP

V-Twin - 8" Round Air Cleaner Assembly fits '18-Up FLST/FXST, '17-Up FLT Models - Chrome 8" M8 round air cleaner assembly features a chrome finish. Fitment: FLST 2018-UP FLT 2017-UP FXST 2018-UP

V-Twin - 11-1/4" Front Axle Kit fits Custom application for Paughco and Wyatt forks - Chrome Spring Fork axle kit includes a doubled thread 11-1/4" long, and 3/4" outer diameter axle, 2 star washers, 2 straight spacers, a shoulder spacer and 2 shoulder...

S&S Cycle - Stealth Air Cleaner Kit Without Cover fits '23-'24 121 CVO M8 Touring Models , '24 Road Glide/ Street Glide Features: High-strength synthetic polymer backplate - designed to reduce heat transfer to intake air Cooler, denser air...

S&S Cycle - Stealth Air Cleaner with Lava Chrome Teardrop fits '23-'24 121 CVO M8 Touring Models , '24 Road Glide/ Street Glide Features: High-strength synthetic polymer backplate - designed to reduce heat transfer to intake air Cooler, denser...

Daytona Twin Tec - Fuel Injection Electronic Control Module Kit fits '14-'17 Softail Model Features: Includes wide-band 18 mm oxygen sensors, 18 mm sensor bungs and sensor cables, USB-C cable and USB-C to A adapter, PC Link Software and...

Daytona Twin Tec - Fuel Injection Electronic Control Module Kit fits M8 Softail Model  Features: Includes wide-band 18 mm oxygen sensors, 18 mm sensor bungs and sensor cables, USB-C cable and USB-C to A adapter, PC Link Software and...

Daytona Twin Tec - Fuel Injection Electronic Control Module Kit fits M8 Touring/Trike Models Features: Includes wide-band 18 mm oxygen sensors, 18 mm sensor bungs and sensor cables, USB-C cable and USB-C to A adapter, PC Link Software and...

Kodlin - Fastback Risers - fits '18-'23 M8 Softail With Digital Gauge Features: CNC-machined from billet aluminum Stainless hardware and zip ties included Fitment 2022-2024 Harley-Davidson Softail Low Rider ST...

LA Choppers - One-Piece Kage Fighter Handlebar - fits '24 Harley Touring Models Features: High-strength steel tubing construction 1-1/4" diameter handlebar and risers Accepts stock controls 3" on-center risers Designed for internal...

Drag Specialties - Starter Drive Clutch fits '06 Dyna, '07-'17 Twin Cam Models (OEM #31632-06, 31633-07) Features: High-quality components to repair common failures of OEM Harley starters Designed to improve clutch life under hard starting...

Spyke - Starter Jackshaft Kit fits '99-'06 Twin Cam Models (Except '06 Dyna) - 10 Tooth Features: Complete assembly includes shaft extension, pinion gear, coupler, spring and clips Fitment 2006 Harley-Davidson Street Glide...

Drag Specialties - Chrome Ignition Module Cover fits '86-'03 Sportster Model (OEM #66325-82) Features: Smooth stamped steel construction Fitment 2002-2003 Harley-Davidson 883 Roadster XLR - - 1999-2003 Harley-Davidson 883...

V-Twin - 16" x 3.00" Front or Rear Spoke Wheel fits '73-'84 FL, '73-'82 Rear Only FX Models Replica 16" X 3.00" single disc wheel assembly features chrome rim, 40 chrome spokes, chrome hub with internals. This wheel has a large valve stem hole to...

Wyatt Gatling - Shovelhead Chrome Rocker Box Line Kit fits '79-'83 FLT, '66-'84 FL, '82-'83 FXR Models Natural brass rocker box line kit includes "T" to oil the heads with 6mm brass tube and brass fittings. Tubes feature a chrome finish over the brass...

Wyatt Gatling - Brass Shovelhead Rocker Box Line Kit fits '79-'83 FLT, '71-'84 FX, '82-'83 FXR Models Natural brass rocker box line kit includes "T" to oil the heads with 6mm brass tube and brass fittings. Install hex fitting in the engine block...

York - 48 Tooth Rear Chrome Sprocket Flat fits '82-'99 Sportster Models 5-Spoke rear flat sprocket with a chrome finish. Sprocket is 48 tooth. Fitment: XL 1982-1999 Custom application Measurements: Inner Diameter: 1.9764" Inner Diameter: 50...

V-Twin - Muffler T Bolt Set Muffler pipe t-bolt set is a replacement for all of our muffler pipes which have channel type mounting. Supplied with nuts. The stud features a 1" x 5/16" x 18" thread. Sold in a quantity of 2. Fitment: Replacement...

V-Twin - Black 1" Exhaust "P" Clamp Set fits Custom Application for Exhaust Pipes or Footpegs Black 1" exhaust P-clamp set is for mounting exhaust pipes or frame tube. Measures 3-5/8" from below the bolt hole to end. Sold in a quantity of 2...

V-Twin - Drag Exhaust Pipe Heat Shield Set fits '70-'84 FX, '70-'84 FXS, '70-'84 FXE Models - Chrome Chrome heat shield set for drag pipes on FX, FXE and FXS models. Could fit muffler pipes if trimmed down. Pipes are 38" long with slash cut ends and...

V-Twin - Muffler T Bolt Set fits Replacement Application for Muffler Pipes with Channel Mounting Muffler pipe t-bolt set is a replacement for all of our muffler pipes which have channel type mounting. Supplied with nuts. The 5/16" stud is 2" long...

V-Twin - 1-3/4" Black Exhaust Pipe Mount Bracket fits for Custom Application Black 1-3/4" exhaust pipe mounting bracket is used to mount drag pipes on mufflers with the use of T bolts. Originally BK-4, by Cycle Shack, 1970-2018. Bracket fits...

V-Twin - Black Exhaust Bracket fits '71-'85 FX Model Black channel exhaust mount bracket fits MCM drag pipes. Pipes are 38" long with slash cut ends and features channel mounts for mounting. For mounting drag pipes, use t-bolts...

V-Twin - 1-3/4" Exhaust Hanger Clamp Set fits for Custom Application - Chrome 1-3/4" hanger style exhaust clamp set with long straps to mount exhaust body to the frame. Features a chrome finish. Set of two. Includes bolt set. Fitment: Custom...

Drag Specialties - Rear Chain Adjuster Bolt fits '48-'72 Big Twin (3/ 8”-24 x 3”) (OEM #41576-36) Features: Adjuster bolts for rear chain Fitment 1971-1972 Harley-Davidson 1200 Super Glide...

V-Twin - Front Fender Raw Steel fits Custom application for 21" wheel Wyatt front fender is 2mm thick raw steel laser cut from full piece blanks. The outer diameter of the bracket is 8". Inside width of the fender is 4-7/8". Fender has a 140°...

Drag Specialties - Starter Solenoid fits '80-'88 FLT/​FLHT & '82-'88 FXR Models (OEM #31489-79) Features: Features zinc-finished moisture-proof case, hardened steel plunger and long-life contact disc Replacement Part for...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19” x 2.5” fits '08-'10 Sportster (w/o ABS) (Single Disc) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19” x 2.5” fits '06-'07 Sportster (Single Disc) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2.15” fits '06-'07 Sportster (Single Disc (OEM #43557-05)) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with...