Harley Davidson
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Jims - 1700 Main/Shaft Clutch Gear Tool fits '36-'86 Big Twin Models w/ Kick-Start 4-Speed Transmission
Jims
$368.95Jims - 1700 Main/Shaft Clutch Gear Tool fits '36-'86 Big Twin Models w/ Kick-Start 4-Speed Transmission Features: Removes kick starter clutch gear successfully, without damage to the gear Made in the U.S.A...$368.95 -
Out of stock
Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models
Jims
$367.95Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models Features: Tool is used to remove the sprocket shaft Timken® bearing on late '86-'02 Big Twins with an integral sprocket shaft Does the job better than anything else on the...$367.95 -
Jims - 2324 Sprocket Shaft Installer fits '95-'03 Sportster & '95-'02 Buell Models
Jims
$159.95Jims - 2324 Sprocket Shaft Installer fits '95-'03 Sportster & '95-'02 Buell Models Features: Installs sprocket seal to proper depth Use with JIMS® Driver Handle Holds seal perfectly square Made in the U.S.A...$159.95 -
Out of stock
Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models
Jims
$171.95Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings. Fitment 2006 Harley-Davidson Street...$171.95 -
Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models
Jims
$136.95Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals Fitment 2002 Harley-Davidson Softail Fat Boy EFI...$136.95 -
Out of stock
Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models
Jims
$217.95Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models Features: Removes old bearing straight and will not damage the transmission case Can be used without removing transmission from the bike Made in the U.S.A...$217.95 -
Out of stock
Jims - 2256 Drive Gear Seal Installation fits All 5-Speed Big Twin Models
Jims
$155.95Jims - 2256 Drive Gear Seal Installation fits All 5-Speed Big Twin Models Features: Use to install main drive gear oil seal to the proper depth with transmission assembled Includes protective sleeve for seal, which can be used to protect main drive...$155.95 -
Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models
Jims
$73.95Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...$73.95 -
Jims - 2246 Timken® Bearing Race Installer fits '69-'02 Big Twin, '77-'03 Sportster & '82-'02 Buell Models
$385.95Jims - 2246 Timken® Bearing Race Installer fits '69-'02 Big Twin, '77-'03 Sportster & '82-'02 Buell Models Features: Used to install bearing race straight into the left crankcase A must for late-model cases Made in the U.S.A...$385.95 -
Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models
Jims
$46.95Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models Features: Removes oil screen without removing exhaust Used to remove the tappet oil screen plug Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...$46.95 -
Out of stock
Jims - 94547-80A Sprocket Shaft Bearing Race Tool fits '69-'02 Big Twin Models
Jims
$112.95Jims - 94547-80A Sprocket Shaft Bearing Race Tool fits '69-'02 Big Twin Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to remove and install Timken® bearing race on motor cases Made in the U.S.A...$112.95 -
Out of stock
Jims - 37047-91-6 2.5" Sprocket Shaft Bearing Optional Sleeves fits '77-'03 Sportster Models
Jims
$58.95Jims - 37047-91-6 2.5" Sprocket Shaft Bearing Optional Sleeves fits '77-'03 Sportster Models Features: For use on specific Harley-Davidson® Sportster and Buell® model years Optional sleeves for JIMS® Sprocket Shaft Bearing Installation...$58.95 -
Out of stock
Jims - 35316-80 5-Speed Main Drive Gear Tool fits '80-'06 Big Twin (Except '06 Dyna) & '91-'06 Sportster Models
Jims
$370.95Jims - 35316-80 5-Speed Main Drive Gear Tool fits '80-'06 Big Twin (Except '06 Dyna) & '91-'06 Sportster Models Features: Installs the main drive gear without removing the transmission Used to remove and install the main drive gear Made in the...$370.95 -
Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models
Jims
$363.95Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models Features: Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S...$363.95 -
Out of stock
Jims - 1707 Cleveblock Spreading Tool fits '80-'01 5-Speed Rubber-Mount Frames
Jims
$69.95Jims - 1707 Cleveblock Spreading Tool fits '80-'01 5-Speed Rubber-Mount Frames Features: Spreads the swing arm cleveblocs allowing for installation of the swing arm Use to install the swing arm in a 5-Speed rubber mount frame Comes with...$69.95 -
Jims - 34734-80 Main Drive Gear Bearing/Seal Installer Tool fits '80-'90 5-Speed Big Twin Models
Jims
$97.95Jims - 34734-80 Main Drive Gear Bearing/Seal Installer Tool fits '80-'90 5-Speed Big Twin Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a one-ton press Install...$97.95 -
Out of stock
Jims - 34623-83 Piston Pin Tool fits '84-'99 Big Twin (Except Twin Cam), '86-'03 Sportster Models
Jims
$197.95Jims - 34623-83 Piston Pin Tool fits '84-'99 Big Twin (Except Twin Cam), '86-'03 Sportster Models Features: This tool will install “Round Circlip” rings in one easy step without distorting ring, for the safest wrist pin retention...$197.95 -
Out of stock
Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84)
Jims
$82.95Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...$82.95 -
Jims - 1010 Evolution Rod Alignment Tool for 0.791” Wrist Pin
Jims
$42.95Jims - 1010 Evolution Rod Alignment Tool for 0.791” Wrist Pin Features: Use to check rod straightness without removing the rods from the cases Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...$42.95 -
Out of stock
Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70))
Jims
$77.95Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking...$77.95 -
Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam)
Jims
$651.95Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam) Features: Use on all Big Twin '54-'99 single cam only, (NOTE: Includes aftermarket motors, also XL '57 to early '84 idler gear bushing) Designed to line-ream...$651.95 -
Out of stock
Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam)
Jims
$149.95Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam) Features: Holds cam cover flat and helps prevent damage/scratches when removing and installing bushings Clamps in vice or Bridgeport™ mill Made in the U...$149.95 -
Jims - 95660-42 Main Seal Tool fits '41-'79 4-Speed Transmissions
Jims
$408.95Jims - 95660-42 Main Seal Tool fits '41-'79 4-Speed Transmissions Features: Used to remove and install the main drive seal on specific Harley-Davidson® Big Twin models Made in the U.S.A. Fitment 1979 Harley-Davidson 1200 Fat Bob...$408.95 -
Out of stock
Jims - 95724-57 Tappet Guide Puller Tool fits '57-'85 Sportster Models
Jims
$67.95Jims - 95724-57 Tappet Guide Puller Tool fits '57-'85 Sportster Models Features: Used to remove press-fit tappet guides from crankcase Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster 1000...$67.95 -
Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R)
Jims
$197.95Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R) Features: Use to remove and install wrist pin bushings without removing rods from crankcase Made in the U.S.A...$197.95 -
Jims - 97235-55B Sprocket Shaft Bearing Nut Tool fits '55-'68 Big Twin Models
Jims
$199.95Jims - 97235-55B Sprocket Shaft Bearing Nut Tool fits '55-'68 Big Twin Models Features: Used to install and remove bearing nut Made in the U.S.A. Fitment 1965-1968 Harley-Davidson Electra Glide...$199.95 -
Jims - 1280 Camshaft Bearing Puller fits '99-'06 Twin Cam (Except '06 Dyna) for Removal of Bearings, 'L00-'06 FXST/FL & 'L00-'05 FXD for Removal of Front Cam Bearing
Jims
$351.95Jims - 1280 Camshaft Bearing Puller fits '99-'06 Twin Cam (Except '06 Dyna) for Removal of Bearings, 'L00-'06 FXST/FL & 'L00-'05 FXD for Removal of Front Cam Bearing Features: Once the camshafts are removed from the support plate this tool will...$351.95 -
Jims - 1275 Crankshaft Bearing Tool fits '99-'02 Twin Cam “A” Motors
Jims
$279.95Jims - 1275 Crankshaft Bearing Tool fits '99-'02 Twin Cam “A” Motors Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in the U.S.A...$279.95 -
Jims - 74437-96 Electronic Speedometer Sensor fits '00-'06 Softail Models (OEM #74430-00, 74430-00D, 74437-96)
Jims
$194.95Jims - 74437-96 Electronic Speedometer Sensor fits '00-'06 Softail Models (OEM #74430-00, 74430-00D, 74437-96) Features: Top-quality replacement sensor Also works on any aftermarket transmission case with a speedometer sensor hole Includes O-ring,...$194.95 -
Jims - 74420-94 Electronic Speedometer Sensor fits '99-'03 FLT Model (OEM #74420-94, 74429-97, 74429-97A)
Jims
$194.95Jims - 74420-94 Electronic Speedometer Sensor fits '99-'03 FLT Model (OEM #74420-94, 74429-97, 74429-97A) Features: Top-quality replacement sensor Also works on any aftermarket transmission case with a speedometer sensor hole Includes O-ring,...$194.95 -
Jims - 955 Gauge for Harley-Davidson Injection Pressure fits '01-'20 Big Twin Models w/ Delphi EFI (Except '18-'20 Softails)
Jims
$638.95Jims - 955 Gauge for Harley-Davidson Injection Pressure fits '01-'20 Big Twin Models w/ Delphi EFI (Except '18-'20 Softails) Features: Includes all necessary parts to diagnose Delphi fuel injection; a large gauge assembly, 8" hose, 2" hose, fuel tank...$638.95 -
Jims - 954 Pump Ring Tool fits '08-'20 FLHT Model
Jims
$220.95Jims - 954 Pump Ring Tool fits '08-'20 FLHT Model Features: Use for quick and easy service of fuel filter and other fuel-related parts Removes/installs retaining ring holding fuel pump Heavy-duty construction Made in the U.S.A...$220.95 -
Out of stock
Jims - 756 O2 Sensor Wrench fits '12-'17 Softail Models
Jims
$84.95Jims - 756 O2 Sensor Wrench fits '12-'17 Softail Models Features: Removes and installs O² sensors without removing exhaust pipes Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S...$84.95 -
Jims - 2251 Fork Tube and Leg Holder
Jims
$182.95Jims - 2251 Fork Tube and Leg Holder Features: Mounts in vise to hold fork firmly during repair without causing damage to fork assembly Holds fork legs and tubes for easy hands-free servicing or rebuilding Use on smaller 28 mm or larger fork tubes...$182.95 -
Out of stock
Jims - 1776 Front Compressor Fork
Jims
$622.95Jims - 1776 Front Compressor Fork Features: Also includes FLT adapter for FLT forks to eliminate direct contact with spring coil and special rod to pull up fork damper rod Tool compresses springs in cartridge-style forks when servicing or...$622.95 -
Jims - 970 3rd Hand Axle Locker Tool fits '02-'21 FLT/FLHT Models
Jims
$90.95Jims - 970 3rd Hand Axle Locker Tool fits '02-'21 FLT/FLHT Models Features: Eliminates the need for a helper or trying to blindly hold the axle from the other side of the tire Prevents axle from moving while torquing down the axle nut after setting...$90.95 -
Jims - 977 Fork Stem Nut Wrench fits '96-'13 FLHT & '94-'13 FLHR Models
Jims
$77.95Jims - 977 Fork Stem Nut Wrench fits '96-'13 FLHT & '94-'13 FLHR Models Features: This tool allows the ability to loosen, tighten and torque to spec the 1-1/2” stem nut without radio removal Normally to get access to the top stem nut...$77.95 -
Jims - 5821 49 mm Fork Cap Installer
Jims
$201.95Jims - 5821 49 mm Fork Cap Installer Features: Used to install fork tube caps without removing the fork legs from the bike Made in the U.S.A.$201.95 -
Jims - 5822 Swing Arm Bearing Installer fits '02-'21 Touring Models
Jims
$218.95Jims - 5822 Swing Arm Bearing Installer fits '02-'21 Touring Models Features: Both drive side and brake side bearings, which are at different depths, can be easily and accurately installed with this tool kit JIMS® took it one step further and...$218.95 -
Jims - 5827 Fork Cap Allen Socket fits '14-'20 Touring Models
Jims
$29.95Jims - 5827 Fork Cap Allen Socket fits '14-'20 Touring Models Features: Harley-Davidson® recently updated the fork cap on touring bikes, and you now need a large Allen head socket for disassembly Works on touring models with 49 mm forks Made in...$29.95