Shop By Motorcycle

V-Twin - 12 Volt H-12 Battery Dry fits '67-'78 XLH, '65-'84 FLH/FL Models (OEM #66007-84) H-12 12 volt battery kit features a black case as original. Kit includes a 12 volt battery, red filler tube, hardware kit and clear vent tube. Battery is lead...

V-Twin - Mid Control Brake Kit fits '86-'17 FXST/FLST Models Softail mid control brake kit includes pedal mount plate which attaches to FX style transmission chrome brake pedal, black master cylinder and plunger. Brake pedal mount plate is fastened...

V-Twin - Mid Control Shifter Kit fits '86-'17 FXST/FLST Models Softail mid control shifter kit includes the primary inspection plate with bushing, cross linkage, arm linkage, inner shifter, foot shifter lever and shifter peg. Components are supplied...

V-Twin - Alloy Rear Brake Caliper Bracket fits '87-'99 FXST Model (OEM #44207-87) Alloy rear caliper bracket to accepts a stock style caliper.This bracket replaces a stock unit to accept a stock style caliper Fitment: FXST 1987-1999

V-Twin - Replica Front Brake Shoe Set fits '71-'72 FX, '64-'72 Sportster Models (OEM #41849-64) Replica front brake shoe set features a die cast construction with linings bonded on. Sold as a pair Fitment: FX 1971-1972 XL 1964-1972

V-Twin - Front Brake Backing Plate fits '71-'72 FX, '64-'72 Sportster Models (OEM #44148-64) Polished aluminum front brake backing plate is for front mechanical drum models Fitment: FX 1971-1972 XL 1964-1972

V-Twin - 1.6KW Black Replacement Starter Motor fits '18-Up Touring Model (OEM #314000-53) Direct replacement starter motor is 1.6kW field wound permanent magnet type and features a black finish Fitment: FLHX 2018-UP FLT 2018-UP FLHR 2018-UP FLHT 2018-UP...

V-Twin - 1.6KW Chrome Replacement Starter Motor fits '18-Up Touring (OEM #314000-53) Direct replacement starter motor is 1.6kW field wound permanent magnet type and features a chrome finish. Chrome units have all aluminum parts polished and all...

V-Twin - 1.6KW Black Replacement Starter Motor fits '18-Up FLST/FXST Model (OEM #314000-57) Direct replacement starter motor is 1.6kW field wound permanent magnet type and features a black finish Fitment: FLST 2018-UP FXST 2018-UP

V-Twin - 1.6KW Chrome Replacement Starter Motor fits '18-Up FLST/FXST Model (OEM #314000-57) Direct replacement starter motor is 1.6kW field wound permanent magnet type and features a chrome finish. Chrome units have all aluminum parts polished and...

V-Twin - Front Wheel Hub fits '71-'72 FX, '64-'72 Sportster Models (OEM #43600-64) Front hub wheel includes bearings and snap ring installed and comes completely assembled Fitment: FX 1971-1972 XL 1964-1972

AEE - Black Gloss Mid Control Set fits '18-'23 FXFBS , '18-'21 FLSB, '19-'20 FXDRS Models (OEM #505020-40) AEE Mid Control Set features a gloss black finish.Requires the separate purchase of OEM #50502041 Accessory Mid-Control Shift Side. Use stock...

V-Twin - Black Softail Rear Caliper Bracket fits '87-'99 FLST/FXST Model (OEM #44207-87) Softail rear caliper bracket features a black finish. Fitment: FLST 1987-1999 FXST 1987-1999

V-Twin - Chrome Header Pipe fits '57 '69 XLCH, '57-'78 Sportster Models (OEM #65454-59) XLCH header pipe features a chrome finish. Header set fits with XLCH wrap around tank only. The rear muffler attaches to the rear strut with clamp and stud kit...

V-Twin - 3/8 NPT-22MM Petcock Nut fits '86-'17 FLST/FXST, '75-'95 Sportster Models (OEM #622-83N) Brass 1/4 NPT-22MM petcock nut only Fitment: FX 1975-1984 FL 1975-1984 FXR 1982-1994 FXD 1991-2017 XL 1975-1995 FLST 1986-2017 FXST 1984-2017

V-Twin - Bobbed 3.2 Gallon Gas Tank Kit fits '95-'03 Sportster Model Gas tank is dual cap style with a left side petcock location, and a fuel capacity of 3.2 gallons. Kit includes 3.2 gallon gas tank, coil relocation kit and gas cap set. Please test...

Wyatt Gatling - Chrome Rear Fender Strut Set fits '79-'81 Sportster Models (OEM #52754-79) Rear fender strut set has a chrome finish. Fitment: XL 1979-1981

V-Twin - Replica Exhaust Header Pipe fits '57-'68 Sportster Model Replica chrome header pipe feature a 2 into 1 design. This pipe is one piece Fitment: XL 1957-1968

V-Twin - Exhaust Drag Pipe Set Chrome with Black Slash Tips fits '83-'03 Sportster Model Chrome 40" drag pipe set has a diameter of 1-3/4" and features black slash cut tips. Pipe set will not fit kick start models. **CAUTION: These exhaust products...

V-Twin - Oil Pump Plug fits '84-'98 FXST, '82-'94 FXR, '57-'76 Sportster Models Oil pump plug. Fitment: FXST 1984-1998 UL 1937-1948 FXR 1982-1994 FLT 1979-1998 FX 1971-1984 EL 1936-1940 FL 1941-1984 WL 1929-1952 FXD 1991-1994 XL 1957-1976 FLST 1986-1998...

V-Twin - Chrome Curvado Exhaust Header Set fits '87-'17 FXST/FLST Models Chrome curvado exhaust header pipes set includes 1-3/4" front and rear header pipes as shown, slash cut ends without heat shields Fitment: FXST 1987-2017 FLST 1987-2017

V-Twin - TC-88 Finned Rocker Box Set fits '99-'16 FLT/ FL, '99-'17 FLST/FXST Models TC-88 finned rocker box set features a chrome finish. Fitment: FLT 1999-2016 FL 1999-2016 FLST 1999-2017 FXST 1999-2017

V-Twin - Mid Control Shifter Shaft fits '89-Up FXST/FLST, '81-Up Sportster Models Softail mid control shifter shaft is the cross over type, used to route over inner primary to connect to shifter linkage. For mid shifter control. Shaft has splined...

V-Twin - 3.6 Gallon Gas Tank Raw Steel fits '18-Up M8 Softail Model Gas tank is one piece and has a fuel capicity of 14 liters, featuring a raw finish for M8 models. Accepts bung type vented gas cap. Check the tank for flaws or fit before painting...

V-Twin - H-12 Sealed AGM Battery fits '65-'84 FLH, '67-'78 Sportster Models (OEM #66006-65A) H-12 sealed battery features Absorbed Glass Mat technology, which proposed the best balance between cold cranking amps and amp hour capacity. AGM battery is...

Motorshop - Pinion Shaft End Nut fits '54-'56 K, '57-'80 Sportster Models (OEM #8011) Pinion shaft end nut.Used on tapered end of pinion shaft when installing shaft into flywheel. Fitment: XL 1957-1980 K 1954-1956

Jims - 16-2320 M8 Primary Locking Tool fits '18-Up FLST/FXST Models Jims primary locking tool is used to lock the primary for service work on M8 models. Fitment: FLST 2018-UP FXST 2018-UP

V-Twin - Black Oval Air Cleaner Insert fits '66-'75 XLH/XLCH, '67-'75 FLH/FL Models (OEM #29205-69) Oval air cleaner insert features alloy fins on a black background. Fitment: XLH 1966-1975 FX 1971-1975 XLCH 1966-1975 FLH 1967-1975 FL 1967-1975

V-Twin - 34" Black Upper Clutch Cable fits '20-Up FXLRS, '22-'23 FXLRST Models (OEM #372004-33A) Upper clutch cable is black vinyl type featuring an overall length of 34". Fitment: FXLRST 2022-2023 FXLRS 2020-UP Measurements: Travel: 2-5/16"

V-Twin - Black Die Cast Tank Trim Cover fits '84-'99 FXST Model Black die cast tank trim cover replaces existing rubber divider on models with die cast dash. Includes cushion tape for underside to protect gas tanks. Fitment: FXST 1984-1999 Tech...

V-Twin - Brake Pedal Shaft fits '86-'17 FXST/FLST Models Softail foot brake pedal shaft with splined end. For mid control brake and pedal kit. Pedal shaft is splined to accept footpeg mount. Drilled and tapped for 3/8" x 16 thread Fitment: FXST...

V-Twin - Passenger Footpeg Set fits '18-Up FLST/FXST Models Passenger footpeg set with a female clevis features an alloy finish. The length from the center of the clevis bolt to the end is 100mm. Sold asset of two. Fitment: FLST 2018-UP FXST...

V-Twin - 21" x 2.15" Front Spoke Wheel fits '84-'99 FLT Model Replica 21" X 2.15" front wheel features chrome drop center rim, 40 chrome spokes with 40 nipples, and a chrome hub. Note: All spokes on wheel need to be inspected and re-torqued after 500...

V-Twin - XR 750 18" x 2.15" Rear Wheel fits '70-'84 XR, '37-'52 W, '57-'78 Sportster Models 18" x 2.15" WR/KR/XR rear wheel includes alloy hub with 9/16" bearings and a lock nut for the sprocket, stainless steel spokes and nipples and an 18" alloy H-C...

V-Twin - XR 750 19" x 2.50" Rear Flat Track Wheel fits '70-'84 XR, '52-'56 K, '57-'78  Sportster Models 19" WR/KR/XR rear wheel features a natural finish hub with 9/16" ball bearings and internals installed. Laced with 6-8 gauge stainless steel...

Colony - 7619-1 Chrome Domed Triple Tree Fork Stem Nut fits '71-'84 FX, '78-'87 Sportster Models (OEM #45718-71) Chrome domed triple tree fork stem nut features 7/8" x 24 inside threads. Fitment: FX 1971-1984 XL 1978-1987 Measurements: Inner...

Colony - 9953-10 Acorn Screw Kit fits '99-Up FXST/FLST/FLT & '99-'17 FXD Models Acron screw kit for TC-88 points cover. Fitment: FXST 1999-UP FLST 1999-UP FLT 1999-UP FXD 1999-2017

V-Twin - WR 19" x 3.00" Front Spool Wheel fits '52-'56 K, '57-'72 Sportster Models WR 19" x 3.00" front spool wheel includes a nickel plated hub with 11/16" bearings installed, laced to a 19" x 3.00" chrome rim with stainless steel spokes and nipples...

Colony - 7622-1 Chrome Fork Tube Cap fits '73-'84 FX, '82-'85 FXR, '73-'85 Sportster Models (OEM #45993-73) Chrome fork tube cap. Fitment: FX 1973-1984 FXR 1982-1985 XL 1973-1985

V-Twin - Intake Manifold Seal Kit fits '90-'17 FLST/FXST, '88-'06 Sportster Models Manifold seal kit is to reseal late model manifolds with CV carburetor Fitment: FLST 1990-2017 FXD 1991-2017 FXST 1990-2017 XL 1988-2006 FLT 1990-UP