Shop By Motorcycle

V-Twin - 39-0616 - 1937 Dash Panel Kit Description 1937 dash panel kit includes a chrome dash, lens frames, lens tunnels and a set of lenses. Fits: EL 1937-1937 Additional Information UOM 1 -...

V-Twin - 39-0061 - 1937 Dash Tunnel Kit Description 1937 dash tunnel kit includes 2 tunnels, held in place by a dash panel lens rim set, and red and clear lenses.Green lens not included. *NOTE: Tunnels are for directing light from bulbs on 1936-1937...

V-Twin - 38-6679 - Knucklehead Tank Stainless Steel Trim Set 1940-46DescriptionGas tank emblem trim set is stainless steel and is for 1940-1946 knucklehead models.Trim snaps into place as original, order mount strips and mount screws separately. Sold as...

V-Twin - 38-1946 - Knucklehead Bob Gas Tank Kit with 3.5 GallonDescriptionBobbed gas tank kit includes a two piece gas tank set with a 3.5 gallon fuel capacity. Includes painted emblems, a replica gas cap set, shutoff rod kit, mount bolt kit, shifte...

V-Twin - 38-0852 - 1966 Fat Bob Gas Tank Set 3.5 GallonDescriptionGas tank accepts 1975-up petcocks with nut, and has a fuel capacity of 3.5 gallons. Features left side petcock outlet.Tank accepts a stock dash and speedometer, a bayonet type cap, and has...

V-Twin - 38-0627 - 1966 Fat Bob Gas Tank Set 3.5 GallonDescriptionBobbed gas tank set has a fuel capacity of 3.5 gallons. Includes emblem mounts welded in place, 1966-1971 emblems with screws and a gas cap set. Gas tank does not have holes on the left...

V-Twin - 38-0568 - 1966 Fat Bob Gas Tank Set 5.0 GallonDescriptionBobbed gas tank kit includes 5 gallon gas tank set with 1966-1974 emblems with screws, gas cap set, and emblem mounts welded in place.For foot shift applications. Accepts 3/8" NPT petcock...

V-Twin - 38-0543 - 1966 Fat Bob Gas Tank Set 5.0 GallonDescriptionGas tank set with right side forward petcock fitting has a fuel capacity of 5.0 gallons. 3/8 NPT fitting was for 1966 specifically, but will mount to all 1947-1984 FLH.Petcock hole is 3/8"...

V-Twin - 38-0519 - Knucklehead Fat Bob Gas Tank Kit 3.5 GallonDescriptionKnucklehead Fat Bob gas tank kit is a two piece gas tank set with a fuel capacity of 3.5 gallons. Includes a chrome emblem set with black and red paint, emblem mounts, gas cap set,...

V-Twin - 37-6716 - Panhead Grade J82 Machine ScrewDescriptionPanhead grade J82 steel machine screw is zinc plated with an internal tooth, 8-32 x 1/4 Fits:All modelsAdditional Information UOM5 - PK ManufacturerV-Twin OriginUSA 2025 Catalog Pages1319

V-Twin - 37-6715 - Panhead Grade 18-8 Machine ScrewDescriptionPanhead grade 18-8 machine screw is stainless steel and uncoated, 6-32 x 1/4". Screw is without washer. Fits:All modelsAdditional Information UOM5 - PK ManufacturerV-Twin OriginUSA

V-Twin - 37-6714 - Panhead Grade J82 Steel Machine ScrewDescriptionPanhead grade J82 steel machine screw is zinc plated with an internal tooth, 8-32 x 3/8 Fits:All modelsAdditional Information UOM5 - PK ManufacturerV-Twin OriginUSA

V-Twin - 37-6712 - Panhead Screw with Spring Lock Washer SteelDescriptionSteel Panhead screws features 6-32 thread and is 1/4" long. Screws are sold in a pack of 5 with spring lock washer. Fits:All modelsAdditional Information UOM5 - PK ...

V-Twin - 37-6711 - Panhead Screw with Spring Lock Washer SteelDescriptionSteel Panhead screws features 8-32 thread and is 1/4" long. Screws are sold in a pack of 5 with spring lock washer. Fits:All modelsAdditional Information UOM5 - PK ...

V-Twin - 37-6710 - Panhead Screw with Spring Lock Washer SteelDescriptionSteel Panhead screws features 8-32 thread and is 3/8" long. Screws are sold in a pack of 5 with spring lock washer. Fits:All modelsAdditional Information UOM5 - PK ...

V-Twin - 37-1753 - Cast Panhead Cover Screw KitDescriptionCast panhead cover screw kit features 12pc set stainless steel allen screws.. Fits:FL 1948-1965Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with...

V-Twin - 37-0905 - 1936 Oval Head Screw Set Description 1936 oval head screw set for Knucklehead rocker shaft end caps.Sold as a set of 4. Fits: EL 1936-1936 Additional Information UOM 4 -...

V-Twin - 35-2176 - Shovelhead Keihin Carburetor kitDescriptionShovelhead Keihin carburetor kit includes intake mainfold, insulator spacer, clamp, mount stud and replica Keihin carburetor.*NOTE: Order single throttle calbe and air cleaner and bracket...

V-Twin - 35-1658 - Sifton Panhead Intake Manifold KitDescriptionSifton Panhead intake manifold kit is precision cast and machined with special seal design, using heavy duty clamps. Fits:FL 1955-1965Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1279 - OKO Panhead Shorty 1-7/8 inch Carburetor KitDescriptionAlloy OKO Panhead 1-7/8" shorty carburetor kit is for models with o-ring type heads for intake manifold. It has a relocated accelerator pump nozzle for increased throttle response...

V-Twin - 35-1278 - OKO Panhead Shorty 1-7/8 inch Carburetor Kit AlloyDescriptionAlloy OKO Panhead 1-7/8" shorty carburetor kit is for models with o-ring type heads for intake manifold. It has a relocated accelerator pump nozzle for increased throttle...

V-Twin - 35-0694 - 38mm Panhead Carburetor KitDescriptionKit includes 38mm flat side carburetor with built in choke activator, spigot intake manifold, throttle cable, twist grip set and 4 bolt flange adapter.Kit is for o-ring style, like the original or...

V-Twin - 35-0667 - Panhead CV-40mm Carburetor KitDescriptionNatural CV carburetor kit is for Panhead Big Twins. Kit includes CV 40mm carburetor, intake manifold, adapter support bracket, enrichner assembly and manifold clamps.Throttle is operated by...

V-Twin - 35-0645 - OKO Panhead Shorty 1-7/8 inch Carburetor Kit AlloyDescriptionAlloy OKO Panhead 1-7/8" shorty carburetor kit is for models with o-ring type heads for intake manifold. It has a relocated accelerator pump nozzle for increased throttle...

V-Twin - 35-0625 - 1936-1939 Petcock Set Description Petcock set features a zicad finish. The right side is 1/8"-27 NPT and the left side is 3/8"-18 NPT.*NOTE: Diassemble petcock, remove cotter pin, and use fine compound to "lap in" taper for a...

V-Twin - 35-0445 - Brass Knucklehead Carburetor Throttle LeverDescriptionKnucklehead throttle lever material is cast brass. Clamping and idle adjustment screws are included.Lever features one hole for cable block location. Fits:FL 1940-1947Additional...

V-Twin - 3464-1 - Knucklehead Choke Lever ParkerizedDescriptionKnucklehead choke lever features a parkerized finish. Fits:FL 1936-1937EL 1936-1937Additional Information OEM No.1233-36 UOM1 - EA ManufacturerColony OriginUSA 2025 Catalog Pages711

V-Twin - 3426-1 - Knucklehead Choke Lever Cadmium PlatedDescriptionKnucklehead choke lever is cadmium plated. Fits:FL 1936-1937EL 1936-1937Additional Information OEM No.1233-36 UOM1 - EA ManufacturerColony OriginUSA 2025 Catalog Pages711

V-Twin - 34-1938 - 1936 EL Air Cleaner Assembly with Raw Cover Description Raw air cleaner assembly is reproduced in the exact shape configuration used on 1936 EL Knucklehead models.Kit includes a raw ribbed cover and the backing plate to fit linkert...

V-Twin - 34-1937 - 1936 EL Air Cleaner Assembly Patina Chrome Description Patina chrome air cleaner assembly is reproduced in the exact shape and configuration used on 1936 EL Knucklehead models.Kit includes patina chrome ribbed cover and the backing...

V-Twin - 34-1936 - 1936 EL Air Cleaner Assembly Chrome Description Chrome air cleaner assembly is reproduced in the exact shape and configuration used on 1936 EL Knucklehead models.Kit includes chrome ribbed cover and backing plate to fit linkert...

V-Twin - 34-1804 - Panhead Phillips Screw Set Zinc PlatedDescriptionZinc plated Panhead Phillips 3 piece screw set measures 1/4"-20 x 5/8". Fits:FLST 1993-2007XL 1988-UPFXST 1993-2007FLT 1993-2007FXR 1993-1994Additional Information UOM1 - SET ...

V-Twin - 34-1803 - Panhead Phillips Screw Set Zinc PlatedDescriptionZinc plated Panhead Phillips 3 piece screw set measures M6 x 1 x 16mm. Fits:FLST 1993-2007XL 1988-UPFXST 1993-2007FLT 1993-2007FXR 1993-1994Additional Information UOM1 - SET ...

V-Twin - 34-1530 - 1936 Style Air Cleaner Cover Description Air cleaner cover is 6" and is the exact dome shape as an original from 1936.*NOTE: Center portion is like the "1936" profile. Cover is domed without logo and mounts to backing plate by 4...

V-Twin - 34-0282 - 1936 Dome Linkert Air Cleaner Description 1936 dome linkert air cleaner includes all parts for the com plete assembly.Air cleaner features a J-slot design with 4 pins on the cover for attachment purposes. Brass tags and rivets are...

V-Twin - 3307-4 - Knucklehead Intake and Exhaust Rocker Arm Cover Return OilDescriptionSet of 4 nuts used on 1936-1947 Knucklehead rocker cover return lines. Fits:EL 1936-1940FL 1941-1947Additional Information UOM1 - SET ManufacturerColony OriginUSA ...

V-Twin - 3282-4 - Knucklehead Rocker Cover Gasket SetDescriptionKnucklehead rocker cover gasket set includes 4 gaskets. Fits:EL 1936-1940FL 1941-1947Additional Information UOM1 - SET ManufacturerColony OriginUSA 2025 Catalog Pages515

V-Twin - 32-2207 - Shovelhead Distributor Clamp Zinc PlatedDescriptionZinc plated Shovelhead clamp for mounting distributor in 1936-52 EL and 1941-64 FL models. This is a 2 mount hole at base only.For use with v-fire Big Twin Overhead Valve auto advance...

V-Twin - 32-1897 - Panhead 12 Volt Brass Coil KitDescriptionCoil kit includes a 12 volt replica brass plated coil, wire set, zinc plated distributor with top and mount bolts.*NOTE: Must order coil mount stud separately. Fits:FL 1948-1962Additional...

V-Twin - 32-1896 - Panhead 6 Volt Brass Coil KitDescriptionCoil kit includes a 6 volt replica brass plated coil, wire set, zinc plated distributor with top and mount bolts.*NOTE: Must order coil mount stud separately. Fits:FL 1948-1965Additional...