Shop By Motorcycle

V-Twin - 40-0636 - Replica 1936 Knucklehead Black Oil TankDescriptionReplica 1936 Knucklehead wrap around oil tank, is the original type with female fittings for banjo bolts. Features a non embossed smooth top, lower panels and comes with a drain plug...

V-Twin - 40-0247 - Knucklehead Top Y Oil Line ZicadDescriptionBanjo type top oiler line has a zicad finish for Knuckleheads. Line utilizes the 9/16" hex nut bolt.Features banjo end to accept banjo bolts, not included. ...

V-Twin - 40-0240 - Knucklehead Top Y Oil Line ChromeDescriptionBanjo type top oiler line has a chrome finish for Knuckleheads. Line utilizes the 9/16" hex nut bolt.Features banjo end to accept banjo bolts, not included. Fits:EL 1936-1940FL...

V-Twin - 40-0239 - Knucklehead Top Oil Line ZicadDescriptionTop oil line features a zicad finish and Knucklehead with gland type nuts for installation. Line utilizes the 9/16" hex nut bolt.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Fits:FL...

V-Twin - 40-0112 - Knucklehead Top Oil Line CadmiumDescriptionKnuckleheads satin chrome oil line with gland type nuts for installation. Line utilizes the 9/16" hex nut bolt. Fits:FL 1942-1947 KnuckleheadAdditional Information OEM No.63480-42 UOM1 - EA ...

V-Twin - 39-0875 - 1962-1967 Replica 1:1 FL Speedometer Description Speedometer has a ratio of 1:1 for FL models and includes a chrome set trip knob.*NOTE: Accurate face design, needle and colors for years noted, although it fits any 1:1 ratio...

V-Twin - 39-0834 - 1936-1937 Knucklehead Dash Base AssemblyDescription1936-1937 Knucklehead dash base assembly is constructed of raw steel. Kit includes dash base with replica switch, wired to a cloth cover wiring harness, with dimmer and horn button...

V-Twin - 39-0769 - 1968-1970 Speedometer with 1:1 Ratio Description Speedometer has a ratio of 1:1 and features a black face with silver numbers reading 0-120 mph and a red, white and black needle.Speedometer features a male fitting on the back of the...

V-Twin - 39-0616 - 1937 Dash Panel Kit Description 1937 dash panel kit includes a chrome dash, lens frames, lens tunnels and a set of lenses. Fits: EL 1937-1937 Additional Information UOM 1 -...

V-Twin - 39-0061 - 1937 Dash Tunnel Kit Description 1937 dash tunnel kit includes 2 tunnels, held in place by a dash panel lens rim set, and red and clear lenses.Green lens not included. *NOTE: Tunnels are for directing light from bulbs on 1936-1937...

V-Twin - 38-6679 - Knucklehead Tank Stainless Steel Trim Set 1940-46DescriptionGas tank emblem trim set is stainless steel and is for 1940-1946 knucklehead models.Trim snaps into place as original, order mount strips and mount screws separately. Sold as...

V-Twin - 38-1946 - Knucklehead Bob Gas Tank Kit with 3.5 GallonDescriptionBobbed gas tank kit includes a two piece gas tank set with a 3.5 gallon fuel capacity. Includes painted emblems, a replica gas cap set, shutoff rod kit, mount bolt kit, shifte...

V-Twin - 38-1937 - UL 3.5 Gallon Gas Tank Set Raw Description 2025 New Production raw steel gas tank set is for use with UL models and accepts NPT petcocks. Gas tanks are 3-1/2 gallons for the right and left side. For Big Twin Flathead models.Gas tank...

V-Twin - 38-0852 - 1966 Fat Bob Gas Tank Set 3.5 GallonDescriptionGas tank accepts 1975-up petcocks with nut, and has a fuel capacity of 3.5 gallons. Features left side petcock outlet.Tank accepts a stock dash and speedometer, a bayonet type cap, and has...

V-Twin - 38-0627 - 1966 Fat Bob Gas Tank Set 3.5 GallonDescriptionBobbed gas tank set has a fuel capacity of 3.5 gallons. Includes emblem mounts welded in place, 1966-1971 emblems with screws and a gas cap set. Gas tank does not have holes on the left...

V-Twin - 38-0568 - 1966 Fat Bob Gas Tank Set 5.0 GallonDescriptionBobbed gas tank kit includes 5 gallon gas tank set with 1966-1974 emblems with screws, gas cap set, and emblem mounts welded in place.For foot shift applications. Accepts 3/8" NPT petcock...

V-Twin - 38-0543 - 1966 Fat Bob Gas Tank Set 5.0 GallonDescriptionGas tank set with right side forward petcock fitting has a fuel capacity of 5.0 gallons. 3/8 NPT fitting was for 1966 specifically, but will mount to all 1947-1984 FLH.Petcock hole is 3/8"...

V-Twin - 38-0526 - 1940-1946 Emblem Mount Strip Set Description Emblem mount strip set features a 4-40 thread and is constructed of raw steel.Sold as a set of 2. *NOTE: Must order emblems and screws separately. Set will accept 4-40 screws. ...

V-Twin - 38-0519 - Knucklehead Fat Bob Gas Tank Kit 3.5 GallonDescriptionKnucklehead Fat Bob gas tank kit is a two piece gas tank set with a fuel capacity of 3.5 gallons. Includes a chrome emblem set with black and red paint, emblem mounts, gas cap set,...

V-Twin - 37-6716 - Panhead Grade J82 Machine ScrewDescriptionPanhead grade J82 steel machine screw is zinc plated with an internal tooth, 8-32 x 1/4 Fits:All modelsAdditional Information UOM5 - PK ManufacturerV-Twin OriginUSA 2025 Catalog Pages1319

V-Twin - 37-6715 - Panhead Grade 18-8 Machine ScrewDescriptionPanhead grade 18-8 machine screw is stainless steel and uncoated, 6-32 x 1/4". Screw is without washer. Fits:All modelsAdditional Information UOM5 - PK ManufacturerV-Twin OriginUSA

V-Twin - 37-6714 - Panhead Grade J82 Steel Machine ScrewDescriptionPanhead grade J82 steel machine screw is zinc plated with an internal tooth, 8-32 x 3/8 Fits:All modelsAdditional Information UOM5 - PK ManufacturerV-Twin OriginUSA

V-Twin - 37-6712 - Panhead Screw with Spring Lock Washer SteelDescriptionSteel Panhead screws features 6-32 thread and is 1/4" long. Screws are sold in a pack of 5 with spring lock washer. Fits:All modelsAdditional Information UOM5 - PK ...

V-Twin - 37-6711 - Panhead Screw with Spring Lock Washer SteelDescriptionSteel Panhead screws features 8-32 thread and is 1/4" long. Screws are sold in a pack of 5 with spring lock washer. Fits:All modelsAdditional Information UOM5 - PK ...

V-Twin - 37-6710 - Panhead Screw with Spring Lock Washer SteelDescriptionSteel Panhead screws features 8-32 thread and is 3/8" long. Screws are sold in a pack of 5 with spring lock washer. Fits:All modelsAdditional Information UOM5 - PK ...

V-Twin - 37-1753 - Cast Panhead Cover Screw KitDescriptionCast panhead cover screw kit features 12pc set stainless steel allen screws.. Fits:FL 1948-1965Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with...

V-Twin - 37-0905 - 1936 Oval Head Screw Set Description 1936 oval head screw set for Knucklehead rocker shaft end caps.Sold as a set of 4. Fits: EL 1936-1936 Additional Information UOM 4 -...

V-Twin - 35-2176 - Shovelhead Keihin Carburetor kitDescriptionShovelhead Keihin carburetor kit includes intake mainfold, insulator spacer, clamp, mount stud and replica Keihin carburetor.*NOTE: Order single throttle calbe and air cleaner and bracket...

V-Twin - 35-1658 - Sifton Panhead Intake Manifold KitDescriptionSifton Panhead intake manifold kit is precision cast and machined with special seal design, using heavy duty clamps. Fits:FL 1955-1965Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1279 - OKO Panhead Shorty 1-7/8 inch Carburetor KitDescriptionAlloy OKO Panhead 1-7/8" shorty carburetor kit is for models with o-ring type heads for intake manifold. It has a relocated accelerator pump nozzle for increased throttle response...

V-Twin - 35-1278 - OKO Panhead Shorty 1-7/8 inch Carburetor Kit AlloyDescriptionAlloy OKO Panhead 1-7/8" shorty carburetor kit is for models with o-ring type heads for intake manifold. It has a relocated accelerator pump nozzle for increased throttle...

V-Twin - 35-0694 - 38mm Panhead Carburetor KitDescriptionKit includes 38mm flat side carburetor with built in choke activator, spigot intake manifold, throttle cable, twist grip set and 4 bolt flange adapter.Kit is for o-ring style, like the original or...

V-Twin - 35-0667 - Panhead CV-40mm Carburetor KitDescriptionNatural CV carburetor kit is for Panhead Big Twins. Kit includes CV 40mm carburetor, intake manifold, adapter support bracket, enrichner assembly and manifold clamps.Throttle is operated by...

V-Twin - 35-0645 - OKO Panhead Shorty 1-7/8 inch Carburetor Kit AlloyDescriptionAlloy OKO Panhead 1-7/8" shorty carburetor kit is for models with o-ring type heads for intake manifold. It has a relocated accelerator pump nozzle for increased throttle...

V-Twin - 35-0628 - 1937-1939 Petcock Set Description Petcock set is machined from brass and features a zicad finish. The right is 1/8"-27 NPT and the left is 3/8"-18 NPT.*NOTE: Diassemble petcock, remove cotter pin, and use fine compound to "lap in"...

V-Twin - 35-0625 - 1936-1939 Petcock Set Description Petcock set features a zicad finish. The right side is 1/8"-27 NPT and the left side is 3/8"-18 NPT.*NOTE: Diassemble petcock, remove cotter pin, and use fine compound to "lap in" taper for a...

V-Twin - 35-0445 - Brass Knucklehead Carburetor Throttle LeverDescriptionKnucklehead throttle lever material is cast brass. Clamping and idle adjustment screws are included.Lever features one hole for cable block location. Fits:FL 1940-1947Additional...

V-Twin - 3464-1 - Knucklehead Choke Lever ParkerizedDescriptionKnucklehead choke lever features a parkerized finish. Fits:FL 1936-1937EL 1936-1937Additional Information OEM No.1233-36 UOM1 - EA ManufacturerColony OriginUSA 2025 Catalog Pages711

V-Twin - 3426-1 - Knucklehead Choke Lever Cadmium PlatedDescriptionKnucklehead choke lever is cadmium plated. Fits:FL 1936-1937EL 1936-1937Additional Information OEM No.1233-36 UOM1 - EA ManufacturerColony OriginUSA 2025 Catalog Pages711

V-Twin - 34-1938 - 1936 EL Air Cleaner Assembly with Raw Cover Description Raw air cleaner assembly is reproduced in the exact shape configuration used on 1936 EL Knucklehead models.Kit includes a raw ribbed cover and the backing plate to fit linkert...