Shop By Motorcycle

V-Twin - 32-1873 - Overhead Valve 32E Panhead 12 Volt Alternator KitDescriptionThis 32E Knucklehead, Panhead and flat side Shovelhead includes a black 12 volt alternator with a chrome end cover. Kit also includes black finned solid state regulator and...

V-Twin - 32-1786 - V-Fire Retro Panhead Distributor AssemblyDescriptionV-Fire Big Twin retro distributor features the original look with updated top, fitted with "V-Fire" points and condensor installed under the top. Body and band are zinc and the top...

V-Twin - 32-1760 - 1937-1947 Knucklehead Distributor AssemblyDescriptionDistributor kit includes a nickel plated distributor top and back with gear and 1937-1947 Knucklehead distributor top and a stainless steel distributor cover kit.Also includes the...

V-Twin - 32-1722 - 1936 EL Distributor Top Assembly Nickel Plated Description 1936 EL distributor top assembly features a nickel plated finish and is assembled with the points, condenser, wire and mount hardware. Fits: EL 1936-1936 Additional...

V-Twin - 32-1650 - 1937-1947 Knucklehead Distributor Top Nickel PlatedDescription1936 distributor top is nickel plated. Top includes stud.Insulators are installed. Fits:FL 1937-1947EL 1937-1948Additional Information UOM1 - EA ManufacturerV-Twin ...

V-Twin - 32-1608 - Knucklehead 12 Volt Alternator KitDescriptionKnucklehead 12 volt alternator kit includes 12 volt 32E type alternator, solid state regulator, gear kit for Overhead Valve models and Knucklehead parts, service and dope manual.Order screw...

V-Twin - 32-1494 - 1936 Distributor Top Nickel Plated Description 1936 distributor top has a notch for the wire exit and is nickel plated.*NOTE: Base is drilled and tapped for the early style points sets and also where the condenser fits on the under...

V-Twin - 32-1435 - 1936 Complete Knucklehead DistributorDescriptionComplete Knucklehead distributor features a nickel plated top cap and base and a chrome bail. This is exact for 1936 61" EL Knuckleheads but will fit all 1937-1947 EL-FL models.Includes...

V-Twin - 32-1394 - 1936 EL Distributor Shaft and Housing Nickel Plated Description Nickel plated shaft body with gear and cam shaft installed with pin.Distributor shaft housing features shaft with cam and gear installed. *NOTE: Body is not marked DH-50...

V-Twin - 32-1386 - 1936 EL Distributor Top Nickel Plated Description Nickel plated top features wire cutout special for 1936 only.*NOTE: Points, condenser and hardware not included, must order separately. Fits: EL 1936-1936 Additional...

V-Twin - 32-1257 - 1936 Distributor Cap Description 1936 distributor cap includes a chrome clip.*NOTE: Extra bump in the center! Fits: EL 1936-1936 Additional Information UOM 1 -...

V-Twin - 32-1246 - Panhead Spark Plug Set and Book KitDescriptionReplaces 3-4 Harley plugs with 2 V-Twin Manufacturing plugs for 1948-1965 Panhead Harleys and includes a Panhead parts book. Fits:FL 1948-1974FX 1971-1974Additional Information UOM1 - KIT ...

V-Twin - 32-0060 - 6 Volt Knucklehead Distributor AssemblyDescriptionKnucklehead complete 6 volt distributor is fully assembled with a zicad plated finish base with shaft and gear installed. Includes mount kit and gasket.Top housing includes early point...

V-Twin - 31-9998 - Raw Knucklehead Beehive Tail Lamp License Plate BracketDescriptionNew Old Stock" Knucklehead license plate bracket features a raw finish and is for the beehive tail lamp.This is the early replica of the 1980's for replacement. Fits:UL...

V-Twin - 31-1281 - Knucklehead Oil Filter BracketDescriptionKnucklehead oil filter bracket attaches to the rear rocker box rear bolt for mounting canister oil filter unit. Fits:EL 1936-1947FL 1941-1947Additional Information UOM1 - EA ...

V-Twin - 31-0834 - Panhead Header Clamp SetDescriptionThis is the first version of the stainless steel exhaust header clamp. Exact by V-Twin's exclusive tooling!Includes bolts and spacers as original! ...

V-Twin - 30-3208 - FLT Shovelhead Exhaust HeaderutDescriptionChrome 40" Paughco drag pipes with slash cut ends include mounting hardware.**CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These...

V-Twin - 30-3187 - 1967 Replica Turn Out Muffler SetDescription1967 Replica chrome turn out muffler set features a seamless body design. Muffler is the exact replacement for 1967-1969 FL models.Includes a baffle. Muffler has a 3-1/4" diameter with a...

V-Twin - 30-3164 - 1-3/4 inch Rigid Shotgun Shovelhead Header SetDescriptionChrome rigid shotgun Shovelhead header set is for rigid frames, with a flat pipe to connect to the front header pipe.Sold as a 3 piece set. Order bracket separately. For use with...

V-Twin - 30-1884 - 1967 Style Left Side Muffler SmallDescriptionLeft side 1967 style small muffler features a chrome finish. Fits:FLT 2017-UPAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #30-1292...

V-Twin - 30-1882 - 1967 Style Right Side Muffler LargeDescriptionRight side 1967 style large muffler features a chrome finish. Fits:FLT 2017-UPAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #30-1292...

V-Twin - 30-1296 - M8 Classic Turn Out 1967 Style Muffler Set ChromeDescription1967 style turn out muffler set features a chrome finish. Set includes right and left hand muffler for the stock dual header system. For M8 models.This is a 2 piece muffler...

V-Twin - 30-1293 - Chrome Panhead Exhaust Header SetDescriptionChrome header set for rigid frame installation on Panhead engines. Set includes rear pipe and an offset front pipe extension, which fits into original flat (squash) pipe, to run parallel to...

V-Twin - 30-1292 - Turn Out Muffler Set Classic 1967 Style ChromeDescriptionBolt on type classic 1967 style turn out muffler set features a chrome finish with non-removable baffles installed for M8 models. Set includes a large right and small left...

V-Twin - 30-1291 - Knucklehead Rear Upsweep Pipe ChromeDescriptionKnucklehead rear upsweep pipe features a chrome finish. Fits:EL 1936-1947FL 1941-1947Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 30-1114 - Panhead Rear Upsweep Pipe ChromeDescriptionPanhead rear upsweep pipe features a chrome finish. Fits:FL 1948-1957Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #29-0035 Panhead...

V-Twin - 30-0884 - Replica Knucklehead Muffler ChromeDescriptionReplica chrome muffler features a spot seam welded body construction with formed ends.The muffler body has a diameter of 3-1/4" with a 1-3/4" diameter inlet. The overall length is 27-1/4"...

V-Twin - 30-0882 - Replica Panhead Front Pipe ChromeDescriptionJune 2020 New Production replica Panhead front header pipe features a chrome finish.Replica exhaust system components are produced by V-Twin's own exclusive tooling. New fixtures and dies are...

V-Twin - 30-0880 - Replica Knucklehead Muffler BlackDescriptionReplica black muffler features a spot seam welded body construction with formed ends.The muffler body has a diameter of 3-1/4" with a 1-3/4" diameter inlet. The overall length is 27-1/4"...

V-Twin - 30-0819 - Chrome Panhead Exhaust Header KitDescriptionChrome Panhead exhaust header kit includes four header pipes: the front, rear, y and flat pipe.Kit includes flex cover set, full clamp set and bolt set from Colony. All parts are packaged in...

V-Twin - 30-0806 - Panhead Exhaust Header Kit ChromeDescriptionPanhead exhuast header kit features a chrome finish. This 4 piece system includes clamps and hardware.Kit is packed in a 5 gallon metal oil can. Fits:EL 1948-1952FL 1948-1957Additional...

V-Twin - 30-0803 - Black Knucklehead Exhaust Header KitDescriptionKnucklehead exhaust kit includes 4 pipes, a clamp set and Colony hardware for installation purposes. The clamps and bolts feature a parkerized finish and the pipes are black heat paint...

V-Twin - 30-0802 - Black Replica Panhead Exhaust Header KitDescriptionPanhead exhaust kit includes 4 pipes, clamps, flex tube covers and the Colony hardware kit, that is used for installation. The clamps and bolts are parkerized and the pipes feature a...

V-Twin - 30-0225 - Panhead Crossover Exhaust PipeDescriptionPanhead chrome rear exhaust pipes for Big Twin models with crossover fit stock systems only. For connecting to rear exhaust hearder intersection to left side.Pipe is used for crossover when...

V-Twin - 29-1962 - Panhead Crossover Exhaust System Kit ChromeDescriptionChrome Panhead crossover exhaust system kit includes rear pipe to accept crossover header to the left side.This is a four piece kit. Fits:FL 1958-1964Additional Information UOM1 -...

V-Twin - 29-1162 - FLT Shovelhead Exhaust HeaderDescriptionChrome crossover exhaust system features intersection of left side crossover at rear. Pipes have an outer diameter of 1-3/4". Mufflers are not included. For 1980-1984 FLT Shovelhead models*Note:...

V-Twin - 29-1109 - FLT Shovelhead Exhaust HeaderDescriptionPaughco true dual chrome exhaust system fits Shovelhead FLT models for 1980-1984.Chrome true dual exhaust system features a single pipe for each side. Each pipe is independent: rear pipe for the...

V-Twin - 29-0823 - Panhead Exhaust Header Set Black Description Panhead exhaust header four piece set with black painted finish.Produced with all new tooling, new fixtures and dyes are used to manufacture all 4 pieces. This pipe set fits like a glove!...

V-Twin - 29-0181 - Knucklehead Exhaust Header Set Black Description Black Knucklehead exhaust header three piece set for use on mufflers with built in "Y" junction.Four piece header set. Fits: EL 1936-1940 FL 1941-1947 Additional...

V-Twin - 29-0092 - Panhead Upsweep Exhaust Header SetDescriptionChrome upsweep drag header set will accept straight fishtail extensions or mufflers. Set is intended for use on kick start engines in rigid frames only.Set features S type front pipe for...