Tools

V-Twin - 16-0743 - Oil Filter Wrench ToolDescriptionBlack oxide oil filter wrench tool is used with 3/8" drive.Tool is for easy removal and installation with spin on filters. The black oxide finish...

V-Twin - 16-0740 - Jims Clutch Gear Puller ToolDescriptionJims 4 speed clutch gear puller tool is designed to remove the starter clutch gear without damage to the gear or shaft. Fits:UL 1937-1948FX...

V-Twin - 16-0731 - Jims Transmission Door Installer ToolDescriptionJims transmission door installer tool allows installation of transmission shafts without the use of a hydraulic or arbor press...

V-Twin - 16-0727 - Jims Wrist Pin Bushing Reamer ToolDescriptionJims wrist pin bushing reamer tool is easy to use with their design lead in taper at the start of each ream.Reamer is made to exact...

V-Twin - 16-0724 - Lower Fork Bearing Press Tube ToolDescriptionLower fork bearing press tube tool fits over 1" stem, allowing bearing to be driven on. Fits:FX 1971-1984FLST 1986-2017FXST 1984-2017FL...

V-Twin - 16-0719 - Transmission Stud Installer ToolDescriptionJims transmission stud installer tool is used on stock and aftermarket transmissions that use bottom mouting studs. Fits:UL 1937-1948FLST...

V-Twin - 16-0712 - Main Shaft Starter Clutch Puller ToolDescriptionMainshaft starter clutch puller tool. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

V-Twin - 16-0711 - Needle Bushing ToolDescriptionNeedle bushing tool positions pinion bushing in cam cover. Fits:FL 1970-1984FXST 1984-1998FXR 1982-1994FLT 1979-1998FX 1971-1984FXD 1991-1998FLST...

V-Twin - 16-0700 - Jims Seal ToolDescriptionJims seal tool is used to install the main seal in transmission. Tool will press in the seal as flat and straig ht as possible. Fits:FXD 1991-2005FLST...

V-Twin - 16-0695 - Jims Breather Ream ToolDescriptionJims breather ream tool repairs damaged breather gear holes.Using this tool will repair damaged breather hole, to use a .030 oversize breather...

V-Twin - 16-0682 - Jims Primary Locking Bar ToolDescriptionJims primary locking bar tool is used to lock the primary for service work on 883 XL models. Fits:XL 1991-2003Additional Information<

V-Twin - 16-0679 - Evolution Head Bolt Torque Gauge ToolDescriptionThis accurate gauge allows the measuring of 90  when tightening head bolts. Also features torquing sequence lasered on gauge...

V-Twin - 16-0672 - Jims Transmission Cover Bearing ToolDescriptionJims transmission cover bearing tool removes and installs bearings on 5-speed and aftermarket 6-speed transmissions. Fits:FXD...

V-Twin - 16-0671 - Jims Cam Bearing and Bushing Alignment ToolDescriptionJims cam bearing and bushing alignment tool checks the alignment of cam bearing to cam cover bushing.Any binding of this tool...

V-Twin - 16-0670 - Jims 35mm Hex Fork Nut Socket ToolDescriptionJims 35mm hex fork nut socket tool removes or installs the top fork nut and has a 3/8" drive.Tool has a rubber protector on the inside...

V-Twin - 16-0669 - Jims Cam Cover Bushing Remover ToolDescriptionJims cam cover bushing remover tool will remove the cam cover bushing and will also remove cam bushing in case.This tool is sturdy,...

V-Twin - 16-0665 - Jims Tappet Screw Plug ToolDescriptionJims tappet screw plug tool is used to remove tappet oil filter screen plug without removing exhaust pipes. Fits:FXST 1984-1998FXR...

V-Twin - 16-0661 - Jims Sprocket Shaft Seal Installer ToolDescriptionJims sprocket shaft seal installer tool is designed to install sprocket shaft seal to proper depth and for holding the seal...

V-Twin - 16-0660 - Jims Cam Bearing Installer ToolDescriptionJims cam bearing installer tool presses the inner cam bearings smoothly into the right case with the bearings installed to the proper...

V-Twin - 16-0659 - Jims Pin Gear Lock ToolDescriptionJims pin gear lock tool is used when applying torque to the pinion nut.Align underneath gear and screw into case. Fits:FXST 1984-1998FXR...

V-Twin - 16-0657 - Jims Wheel Hub Nut Wrench ToolDescriptionJims wheel hub nut wrench tool is used to remove and install the slotted lock nut to the correct torque on the spoke wheel. Fits:FL...

V-Twin - 16-0651 - Cylinder Head Support Adapter ToolDescriptionCylinder head support stand. Adapters are to be used with a bar press and that is included to push guides in and out in a straight line...

V-Twin - 16-0643 - Jims Valve Guide Driver Tool KitDescriptionJims 3 piece valve guide driver tool kit is for the use of guide removal and installation on all models. Fits:All modelsAdditional...

V-Twin - 16-0642 - Jims Shifter Fork Gauge ToolDescriptionJims shifter fork gauge tool is used to set and align shifter forks on Big Twin 4-speed models. Fits:FX 1979-1984FL 1979-1984Additional...

V-Twin - 16-0641 - Jims Shifter Fork Gauge ToolDescriptionJims shifter fork gauge tool is used to set and align shifter forks on Big Twin 4-speed models. Fits:UL 1937-1948FL 1941-1978FX 1971-1978EL...

V-Twin - 16-0630 - Fork Tube Plug Socket Wrench ToolDescriptionFork tube plug socket wrench tool Fits:FLST 1986-2017FL 1948-1984FLT 1979-UPFX 1980-1986Additional Information

V-Twin - 16-0622 - Ring-O-Matic Ring Compressor Tool KitDescriptionRing-o-matic ring compressor tool kitThe sizes for this ring compressor tool are as follows: 2-7/8" - 3-1/8", 3-1/8" - 3-3/8",...

V-Twin - 16-0618 - Cylinder Flex Hone ToolDescription3" - 3-3/16" cylinder flex hone tool has a 13-1/2" overall length.This flex hone tool is used to finish and deglaze block cylinders or liners...

V-Twin - 16-0612 - Rocker Arm Bush Ball Hone Tool .554DescriptionRocker arm bush ball hone tool .554 Fits:XL 1957-UPFXR 1982-1994FXD 1991-2017FX 1971-1984FL 1966-1984FLST 1986-2017FXST 1984-2017FLT...

V-Twin - 16-0611 - Chain Puller ToolDescriptionChain puller tool eliminates the annoyance of installing the master link in rear chain.Conveniently pulls chain halves together without loosening at...

V-Twin - 16-0604 - Valve Grinding Stick ToolDescriptionValve grinding stick tool is for hand grinding valves.Synthetic rubber vacuum cup is resistant to oil, grease and gasoline. Cup has a 15/16"...

V-Twin - 16-0593 - Fuel Transfer ToolDescriptionAttaches to the stock check valve and allows fuel transfer from one bike to another or to use for draining the fuel tank for seasonal storage. Transfer...

V-Twin - 16-0592 - Check Valve Rebuild ToolDescriptionRebuild tool provides an easy installation of the check valve o-ring or the rebuild kit without having to remove the tank. Fits:All models with...

V-Twin - 16-0589 - Calibrated Belt Tension GaugeDescriptionCalibrated belt tension gauge to measure belt tension. Fits:FXD 1991-2017XL 1986-UPFXST 1986-2017FXR 1986-1994FLST 1986-2017FLT...

V-Twin - 16-0586 - Crank Truing MachineDescriptionTruing machine features cast iron construction and is designed to true stock style flywheels.For fork tube straightness checking, you must order the...

V-Twin - 16-0585 - Oil Drain Reservoir ToolDescriptionOil drain reservoir holds 2.5 gallons.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight,...

V-Twin - 16-0584 - Wheel Bearing Puller/Installer ToolDescription1" wheel bearing removal head kit. Fits:FLST 2000-2017FXD 2000-2017XL 2000-UPFXST 2000-2017FLT 2000-UPAdditional Information

V-Twin - 16-0579 - Mini Motorcycle LiftDescriptionMini motorcucle lift includes wheel cart tool. Mini lift is removable from the cart.Capacity is 1100lbs, minium height is 5.3", and maxiumum height...

V-Twin - 16-0576 - 4 inch Cylinder Flex Hone ToolDescription4" cylinder flex hone tool is has a 13-1/2" overall length.This flex hone tool is used to finish and deglaze block cylinders or liners...

V-Twin - 16-0575 - 3-5/8 inch to 3-3/4 inch Cylinder Flex Hone ToolDescription3-5/8" - 3-3/4" cylinder flex hone tool has a 13-1/2" overall length.This flex hone tool is used to finish and deglaze...