Tools

V-Twin - 16-0255 - Diamond Chain Breaker ToolDescriptionDiamond chain breaker tool Fits:All modelsAdditional Information OEM No.<

V-Twin - 16-0194 - Speedometer Drive Gear Installation ToolDescriptionSpeedometer drive gear installation tool is for easy installation of a speedometer drive gear onto countershaft gear with use of...

V-Twin - 16-0157 - Tappet Guide Puller ToolDescriptionTappet guide puller tool. Fits:XL 1957-1985Additional Information OEM No.

V-Twin - 16-0138 - Outer Race Press ToolDescriptionOuter race press tool is used to remove and install bearing outer race. Fits:FXST 1984-1998FXR 1982-1994FLT 1979-1998FX 1971-1984FL 1955-1984FXD...

V-Twin - 16-0136 - Shock Tool Set 5 PieceDescriptionShock tool set 5 piece. Fits:All modelsAdditional Information UOM1 -

V-Twin - 16-0120 - Shifter Fork Gauge ToolDescriptionThe shifter fork gauge is used to set and align the shifter forks on 4 speed models.During shifter fork alignment process 3-4 4 speed shifter...

V-Twin - 16-0075 - Wrist Pin Ring ToolDescriptionWrist pin ring tool easily installs and removes wrist pin clips without damage.Tool works on all pistons with retaining ring dimple. Tool does not...

V-Twin - 16-0068 - Headbolt Wrench ToolDescriptionHeadbolt wrench is for use on a 12 point 9/16" headbolt. Fits:FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

V-Twin - 16-0002 - Shock Pump Tool with GaugeDescriptionShock pump features a digital pressure gauge with a PSI range of 0-300.Shock pump tool is for use with Touring air suspension components. The...

Drag Specialties - DS373701 - Left Teardrop Toolbox - ChromeFeaturesBeautiful reproduction of the original toolbox found on early modelsAvailable in a chrome finishReplacement keys available...

Tecmate - O-100V3 - SAE to USB Charger - 2 Pin Connector - LEDFeaturesBuilt in protection turns off USB charging and prevents your parked vehicle's LFP (LiFePO4) or AGM (Pb) battery from draining -...

Tecmate - O-105V2 - Dual USB Charger - 90  BIKE/DIN Plug - Low ProfileFeaturesBuilt in protection turns off USB charging and prevents your parked vehicle's LFP (LiFePO4) or AGM (Pb) battery from...

Tecmate - O-126 - OptiMate™ Monitor O-126 - AUTO Plug to SAEFeaturesSAE to AUTO 12V socket adapter with state of charge monitor that plugs directly into your motorcycle, ATV/SxS, car, pick-up truck...

Technoresearch - TR200044 - O2 Sensor Installer ToolFeaturesRemove heat shields, install bung and tune; when completed, use included screw and copper washer to seal bung and then replace heat shield...

Race Tech - TFSD 37 - Driver - Fork Seal - 37/36 mmFeaturesSplit fork seal drivers save headaches and sealsFit both inverted and conventional forksSpecs

Race Tech - TFSD 41 - Driver - Fork Seal - 41/40 mmFeaturesSplit fork seal drivers save headaches and sealsFit both inverted and conventional forksSpecs

Race Tech - TFSD 46 - Driver - Fork Seal - 46/45 mmFeaturesSplit fork seal drivers save headaches and sealsFit both inverted and conventional forksSpecs

Race Tech - TFSC 01 - Compressor - Fork Spring Features Adapter is recommended for disassembly of Harley-Davidson® cartridge forks Relieves spring pressure for taking off fork tube caps without...

Progressive Suspension - FOL-2 - Fork Oil Tool - Adjuster - KitFeaturesCombination fork oil measurer and adjuster all in oneEasy to read calibration marks and sliding markerDesigned for the...

Race Tech - TFDH 01 - Damping Rod Holding ToolFeaturesWith a tap of a hammer, the taper wedges into the ID of most Damping Rods, late model and vintageDesigned to make spinning damper rods easier to...

Race Tech - TFBT 1010 - Bleeding Tool - ForkFeaturesKit includes adapters for 10 mm L x 1.0 mm, 12 mm L x 1.0 mm, 12 mm L x 1.25 mm and 14 mm L x 1.0 mm damping rodsEasily threads onto the damping...

Race Tech - TFCW 4549 - Fork Cap Wrench - 45/49 mmFeaturesUnique design works on multiple sizes of fork capsEmbossed Race Tech logo on handleSpecs

Race Tech - TFSC 02 - Compressor Tool - SpringFeaturesAdapter is recommended for disassembly of Harley-Davidson® cartridge forksRelieves spring pressure for taking off fork tube caps without damaging...

Motion Pro - 08-0058 - Tool - Chain Breaker/Chain RivetingFeaturesVersatile enough to be used on drive chains and some cam chainsIncludes three pin sizes to fit most chains (2 mm, 3 mm, 4...

Motion Pro - 08-0137 - Spring Compressor - Clutch/Removal - XL/Big Twin/BuellFeaturesStrong die cast steel frame with hardened and black oxide coated adapter boltsReplacing the clutch on...

Motion Pro - 08-0144 - Fork Spring Tool - Springer/Front Fork - Harley DavidsonFeaturesAssists in the disassembly and assembly of springer-type front forks on Harley-Davidson motorcyclesMade in the...

Motion Pro - 08-0153 - Side Case Puller - Harley-Davidson/BuellFeaturesIncludes bracket, puller bolt and set screwsUsed to remove the right side-case coverMade in the USADesigned to work with '70 to...

Parts Unlimited - Piston Pin PullerFeaturesRemoves pins from sizes 14 mm - 20 mmWon't damage piston or connecting rodSpecs

Motion Pro - 08-0427 - Gear JammerFeaturesOriginally developed for removing and installing the primary gear on a Honda CRF450R/XLocks gears in place for easy installation and removalAllows tightening...

Motion Pro - 08-0339 - Screw - Tappet Tool - Oil FilterFeaturesO-ring design retains the tool in wrench or socket while flange design allows downward force to be applied to toolDesigned for use with...

Motion Pro - 08-0526 - Spoke Wrenches - Ergonomic - Set 6FeaturesUse open end for quick adjustment of spoke nipples and semi-closed end for those hard to turn nipples that require more...

Namz - NJC-990120 - Crimp Tool - Mini/"U" Barrel - UniversalFeaturesDesigned for use with JAE MX-1900 series, JST, ECM/BCM Delphi or any other small terminalPerfect for small 30 to 20-gauge...

Performance Tool - W80575 - Pliers - Piston Ring - InstallerFeaturesInstalls and removes piston rings 3/64" to 1/4" thickComfortable vinyl grip handlesSpecs

Magura - 0720568 - Hymec Bleed KitFeaturesIncludes 30 ml syringe, 2 oz. of clutch fluid and necessary fittings/washers for a complete Hymec clutch fluid serviceMagura - Hymec feature videoSpecs

Lang Tools - 440 - Oil Refill Kit - ForkFeaturesAllows replacement of the oil in the fork through the drain plug without disassembling the fork and front endWorks great on fairing models with...

Kibblewhite - GR-3770 - Reamer - .3770"FeaturesThese reamers have been specifically designed for KPMI® Manganese Bronze and Cast Iron valve guidesAlso, once a reamer is used on Cast Iron, it is not...

Kibblewhite - GR-3100 - Reamer - .3100"FeaturesThese reamers have been specifically designed for KPMI® Manganese Bronze and Cast Iron valve guidesAlso, once a reamer is used on Cast Iron, it is not...

Kibblewhite - GR-3110 - Reamer - .3110"FeaturesThese reamers have been specifically designed for KPMI® Manganese Bronze and Cast Iron valve guidesAlso, once a reamer is used on Cast Iron, it is not...

Kibblewhite - GH-3750 - Ball Hones - Valve Guide - 3/8"FeaturesDurable enough to size C630 bronze and cast iron valve guide materialsMade in the U.S.A.Specs

Fuel-Tool - MC800 - Gauge - Fuel Pressure - Magnetic - 360 FeaturesGauge attaches magnetically to machine's fuel tank to quickly check both Static (idling) and Load (under acceleration) fuel pressure...