Tools

V-Twin - 16-1886 - Jims Tappet Adjuster ToolDescriptionJims tappet adjuster hand tool verifies proper adjustment on most hydraulic tappets for Evolution and Twin Cam models.Tappet adjustment made...

Rod straightening tool is for use after checking with the rod alignment plate, as shown. Bend rod as required. Fits:FL 1941-1985EL 1936-1952Additional Information

V-Twin - 16-1883 - Jims Transmission Countershaft Bearing ToolDescriptionJims bearing tool will install and remove the closed end countershaft bearing on 5 and 6 speed Big Twin transmissions without...

V-Twin - 16-1863 - Jims Tappet Test Stand Tool AdapterDescriptionThis adapter is for the Jims tappet pump and test tool for use on Evolution style tappets. Fits:FXST 1984-1998FLT 1984-1998Additional...

V-Twin - 16-1860 - 7mm Valve Guide Ream ToolDescription7mm valve guide ream tool. Fits:FLST 2005-2017XL 2004-UPFXD 2005-2017FLT 2005-2016FXST 2005-2017Additional Information

V-Twin - 16-1858 - Jims Balancer Retainer ToolDescriptionUsed to hold the hydraulic tensioners in place when repairing Beta engines.Hydraulic tensioners are used to keep constant chain tension on the...

V-Twin - 16-1852 - Shaft Turning ToolDescriptionShaft turning tool allows engine to be turned over by 1/2" ratchet or impact driver. Spline type. Fits:XL 1957-UPAdditional Information

V-Twin - 16-1850 - Shaft Turning ToolDescriptionShaft turning tool allows engine to be turned over by 1/2" ratchet or impact driver. Spline type for TC models. Fits:FXD 1991-2005FX 1971-1984FLST...

V-Twin - 16-1849 - Adapter ScrewDescriptionAdapter screws fits 1991-up XL Fits:Special application with clutch compressor tool on 1991-up XL.Additional Information

V-Twin - 16-1848 - Rocker Arm Bushing and Roller Bearing PullerDescriptionThis rocker arm roller bearing puller Fits:All modelsAdditional Information

V-Twin - 16-1847 - Shock Absorber Tool BoltDescriptionShock bolt is for shock absorber tool. Fits:Replacement application for shock absorber tool.Additional Information

V-Twin - 16-1845 - Cylinder Assembly ToolDescriptionThe cylinder assembly tool allows for installation of stud to correct height. Fits:FXST 1984-1998FLT 1984-1998XL 1986-UPFXD 1991-1998FXR...

V-Twin - 16-1842 - Pingel Head Holder ToolDescriptionThe Pingel head holder tool has 12 and 14mm ends to hold the head through spark plug hole, by support in a vise.The Pingel head holder tool is...

V-Twin - 16-1838 - Jims Rod Race Press ToolDescriptionThe Jims rod race press tool makes for easy installation or extraction of rod races and making it easy to support without bending rods. Fits:FXST...

V-Twin - 16-1836 - Sprocket Shaft Bearing ToolDescriptionJims sprocket shaft bearing installer tool*NOTE: Includes 1 collar. Fits:FXR 1982-1994FLT 1979-1998FX 1971-1984FXST 1998-1998FL 1955-1984FXD...

V-Twin - 16-1835 - Case Lap ToolDescriptionJims case lap tool features a lap which is supported on both sides by a pilot on the bushing side and plate which locates on the case pins of the cam cover...

V-Twin - 16-1834 - Timken Bearing Remover ToolDescriptionJims Timken bearing remover tool removes the bearing from the shaft without removing the shaft from the flywheel. Fits:FX 1971-1984FL...

V-Twin - 16-1832 - Lap Head Pilot ToolDescriptionEngine type lap head pilot tool, sold by the each and for Eastern tool only. Fits:Replacement applicationAdditional Information

V-Twin - 16-1823 - Crankshaft Bushing Plate Pilot and ReamerDescriptionThe crankshaft bushing plate pilot and reamer reams in board camshaft and camshaft crankcase bushing. Fits:XL 1991-UPAdditional...

V-Twin - 16-1822 - Pinion Bushing Puller ToolDescriptionThis pinion bushing puller tool is used to remove the pinion bushing from the cam cover. Fits:FXST 1984-1998FXR 1982-1994FLT 1979-1998FX...

V-Twin - 16-1820 - Pinion Bushing Drill Jig ToolDescriptionThe cam and pinion bushing drill jig tool allows the installation and drilling of a dowel pin to factory location. Fits:FL 1941-1954EL...

V-Twin - 16-1818 - Cam Bushing Drill Jig ToolDescription1-3-4 cam bushing drill jig allows the installation and drilling of a dowel pin to factory location. Fits:UL 1937-1948XL 1954-UPAdditional...

V-Twin - 16-1814 - Cam Bushing Drill Jig ToolDescriptionThe cam bushing drill jig allows the installation and drilling of a dowel pin to factory location. Supplied with #31 drill by Jims. Fits:FL...

V-Twin - 16-1810 - Crank Flywheel Nut Socket ToolDescriptionThe Jims flywheel nut socket features a low profile to give 100% nut contact, machined flat at nut receiving end to eliminate rounding off...

V-Twin - 16-1807 - Clutch Adjuster Gauge Tool SetDescriptionThis 3 piece set of clutch adjusting gauges are used to find the correct distance between the outer drive plate and oute r releasing disc...

V-Twin - 16-1805 - Jims Clutch Compressor ToolDescriptionThe Jims compressor tool features access windows to ease the removal and installation of the snap ring. Fits:FLST 1990-2017FXD 1991-2017FXST...

V-Twin - 16-1804 - Rocker Arm Bushing Reamer ToolDescriptionThe Jims rocker arm bushing reamer tool is used to ream rocker bushings to a factory fit of .0007"-.0012" in line with each other. Fits:All...

V-Twin - 16-1803 - Mainshaft Seal Remover and InstallerDescriptionThis mainshaft tool is used to install and remove the main seal in 4-speed transmissions.It will push the seal in as flat and...

Adjustable reamer kick starter shaft tool is to use to fit inner diameter on new bushings. Fits:UL 1937-1948K 1952-1956XL 1957-1979FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Use this adjustable reamer to fit I.D. on new bushings. Fits:FX 1971-1984FL 1941-1984Additional Information UOM1 - EA

V-Twin - 16-1795 - Main Bearing End Play ToolDescriptionThis plug tool allows the setting of proper end play by selection of proper spacer. Use when refitting bearings or bearing sets on late models...

V-Twin - 16-1789 - inchT inch Handle Hex Lug Wrench Tool 7/16 inchDescriptionWheel lug wrench tool with "T" handle, 7/16" hex for 1936-1972 wheel lug bolts. Fits:UL 1937-1948 front or rearEL...

V-Twin - 16-1780 - Pinion Bushing Drill Jig ToolDescriptionThe Jims pinion bushing jig tool allows the installation and drilling of a dowel pin to factory location supplied with #31 drill by Jims...

V-Twin - 16-1779 - Cam Bushing Drill Jig ToolDescriptionThe Jims cam bushing drill jig allows the installation and drilling of a dowel pin to factory location supplied with #31 drill by Jims. Fits:FL...

V-Twin - 16-1775 - Clutch Drum Locking ToolDescriptionUse this clutch drum lock tool to remove clutch hub and motor nuts easily. Fits:FXST 1984-1989FXR 1984-1989FLST 1986-1989FLT 1984-1989Additional...

V-Twin - 16-1774 - Bench Valve Spring ToolDescriptionThe Sifton valve spring tool is bench mounted to compress springs on engines and also used for checking valve travel and coil bind of the valve...

V-Twin - 16-1769 - Clutch Compressor ToolDescriptionThe clutch compressor tool allows disassembly of the clutch pack. Fits:Special application with clutch compressor tool on 1991-up XLAdditional...

V-Twin - 16-1766 - Fork Race Installer ToolDescriptionThis tool will easily install races. Fits:FXD 2008-2017FLST 2007-2017XL 2008-UPFXST 2007-2017FLT 2008-UPAdditional Information

V-Twin - 16-1764 - 15 inch Forged Tire IronDescriptionLifting the bead without bending the rim is a piece of cake with our 15" forged iron tool Fits:All modelsAdditional Information

V-Twin - 16-1763 - Universal Thread Gauge SetDescriptionThe 4 piece Universal thread gauge set identifies USS, Metric, pipe size and spark plug size. Fits:All modelsAdditional Information