Description
V-Twin - 50-0366 - 1955-57 FL Rigid Rear Fender
Description
2024 New Production replica rigid rear fender has a 3 rib indent on the rear chain relief cut out. Fender is fully assembled and riveted together with hinge. Fender features a raw finish and 7/8" wide strap for braces.
Underside of fender includes wire loom track welded in place, side loom track and 2 clips to hold spring loom cover. Spring type flexible loom, available separately. All hinged fenders must be hand fitted at the hinge and pin area. Alignment needs to be adjusted and tweaked to fit your components. Before finishing with primer or painting, fit the fender body, braces, mounting points in place and check the alignment of fender tail and bracket. Fender rivets, hinge and brackets need to be tweaked for final fitment. Patience is required for proper installation! *NOTE: Chain panel with ribs is built-in as one piece with the fender. Features cut out for 1955-69 tail lamp. *NOTE: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs. *NOTE: Replacement fenders ordered through H-D dealers came with 3/4" brackets that are "over the counter" replacement, not OEM installed by the factory
Fits:
- FL 1955-1957
Additional Information
| OEM No. | 59699-55 | ||||||||||||||||||||
| UOM | 1 - EA | ||||||||||||||||||||
| Measurements |
Manufacturer | V-Twin | Origin | Imported | Style | Stock | 2025 Catalog Pages | 615 | Replacement Items | 50-2237 - Rigid Rear Fender Shell Raw | 50-1199 - Rear Fender Tail End with Hinge 50-1576 - Swingarm Rear Fender Hinge 50-1250 - Wire loom Fender Strip Raw Tech Note | Fender hinge construction updated 2024. Underside of rigid rear fender details: A) Wire Loom Spring,B) Hinge Junction, C) Loom Clip Strip on Fender Radius, D) Spring Clip, E) 7/8" Wide Brace, F) Ribbed Chain Panel. *NOTE: Replacement fender ordered thru H-D dealer came with 3/4" brackets. These were over the counter replacements, not OEM installed at the factory. Suggested to use with #33-0300 Stock Type Chrome oval Tail Lamp. Suggested to use with #50-1250, Wire loom Fender Strip Raw Suggested to use with #33-1804 Tail Lamp with Glass Lens Suggested to use with #33-0299 Replica Tail Lamp Primer Suggested to use with #33-1551 License Plate Frame Bracket Black Other Notes |
Related ProductsRelated Products  V-Twin - 50-0429 - 1949-54 FL Rigid Rear FenderV-Twin
$391.85
V-Twin - 50-0429 - 1949-54 FL Rigid Rear FenderDescription2024 New Production rear rigid fender assembly includes a segmented wire loom conduit and features an updated hinge design for the rear tail...
  V-Twin - 50-0368 - Rigid Rear FenderV-Twin
$198.47
V-Twin - 50-0368 - Rigid Rear FenderDescription2021 New Production rigid rear fender features a cutout for the chain relief as on 1951-57 rigid models and accept stainless fender trim attached by...
  V-Twin - 50-0179 - Rigid Rear FenderWyatt Gatling
$285.61
V-Twin - 50-0179 - Rigid Rear FenderDescriptionRigid fender features a two piece spot welded skirt and wide braces which is correct for 1936-46 45 Solo but also fits 1936-52 W.Includes wide 29/32"...
  V-Twin - 50-0284 - Rigid Rear Bob FenderV-Twin
$235.63
V-Twin - 50-0284 - Rigid Rear Bob FenderDescriptionSteel bobber style rigid rear fender without tail end hinge on the front fender section. Doe not includes 1/2 of the hinge in place of the fender...
  V-Twin - 50-1010 - Rear Rigid Fender PlateWyatt Gatling
$43.22
V-Twin - 50-1010 - Rear Rigid Fender PlateDescriptionRigid rear fender plate.*NOTE: This may be cut to match specific year and style of fender. Fits:EL 1936-1948FL 1941-1948Additional Information
|