Sportster XLCR 1000 Cafe Racer

Main wiring harness features plastic covered wires. Main wiring harness only.Handlebar, tail lamp, and turn signal wires must be ordered separately. Fits:XL 1978-1979 Late 1978XLS 1978-1979 Late...

Wiring harness kit features plastic covered wires. Builders kit harness includes main harness, handlebar, tail lamp and starter wires. Wiring harness fits XLH electric start models . Fits:XL...

Prestolite starter motor repair kit includes thru bolts. Fits:FL 1966-1981XL 1967-1973XL 1977-1980GE 1966-1973Additional Information UO

Stainless steel base ignition advance unit without cam is heat treated weights for 1970-up mechanical advance ignitions.Ignition Circuit Breaker Cam OEM #32542-70A and bolt or washers are not...

Weed wacker coil for Dave Hale. Fits:XL 1970-1980Additional Information UOM1 - EA ManufacturerV-Twin<

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:XL 1967-1979Additional Information UOM1 - KIT

XL 12 volt alternator gear kit includes gear, nut, spacer and deflector washer. Kit is for 32E 12 volt style alternator.Accepts 1/4 or 5/16 mount screws. Fits:XL 1958-1983Additional Information

V-Fire point set is the exact replacement for the years listed.Sold in a pack of 5. Fits:FL 1970-1978XL 1971-1978Additional Information OEM No.

Chrome alternator bolts on in place of original 12 volt generator. Chrome state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor...

Black alternator bolts on in place of an original 12 volt generator. Black solid state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses...

V-Fire single fire ignition kit includes a V-Fire single fire ignition kit with a chrome 12 volt coil.Mounts to stock bracket and accepts stock type coil covers. Works with most aftermarket single...

V-Fire dual fire ignition kit includes a V-Fire dual fire ignition kit with a black 12 volt coil.Includes a mechanical advance unit and all hardware. *NOTE: Dual fire is where there are two sparks at...

This V-Fire Tuneable Ignition Advance Assembly includes a st ainless advance base, points plate with "Blue Streak" points , and condenser with hardware.Three pairs of color coated springs are also...

Handlebar wiring harness kit is extended type and color coded. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information UOM1 - E

Replica starter relay will reduce voltage drop in single fire ignition applications during cranking, and will allow full 12 volt battery voltage to the module and coil. Fits:XL 1973-1979FX...

V-Fire ignition kit is single fire and includes mechanical advance unit, hardware, and wiring instructions.Black wire is for the front and the white wire is for the rear. Order coil separately...

V-Fire dual fire ignition kit includes a mechanical advance unit and all hardware.Ignition kit is dual fire where there are two sparks at the same time. Critical wiring instructions are included...

Button style handlebar starter or horn switch comes without wire. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.

Button style handlebar switch is for front brake and comes without wire. Thread is 1/4-32. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information

Plain Rocker style handlebar switch comes without wire. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM10 - PK

Starter is 1.4kW unit that generates more power and shaft speed than the original type 0.8kW starter.Starter includes housing to mount to 1965-1978 Big Twin. Unit is Presolite high output type...

V-Fire ignition advance unit features stainless steel base, heat treated weights, and cam center screw for 1970-up mechanical advance ignition. Fits:FX 1971-1978FL 1970-1978XL 1970-1978Additional...

Relay to ground wire. Fits:XL 1970-1980FXE 1971-1978Additional Information OEM No.70169-70 UOM

Zinc horn bracket for left side Fits:XL 1952-1984Additional Information OEM No.69031-57 UOM1 - EA

Solo seat hardware mount kit includes nose brackets, springs and rear bracketsUse mount kit for smaller type solos such as K or CH types. Fits:XL 1952-1978Additional Information

Black exhaust support tube mounts drag pipes or stock mufflerrs system to 1958-1979 XL-XLH models Fits:XL 1958-1978Additional Information OEM No.65316-65

Chrome speedometer mount bracket with left side cut.Mounts plastic speedometer gauges. The distance center to center measures 2-3/8". Fits:FX 1974-1984XL 1974-1985Additional Information

Chrome bracket for tachometer. Fits:FX 1974-1984XL 1974-1985Additional Information OEM No.92116-74 UO

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is extra...

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is...

Stainless steel exhaust clamps are designed with a heat treated T bolt and self locking nut.Sold in a quantity of 2. ...

Chrome front clamp pipe with angle.Clamp has an inner diameter of 1-3/4". Fits:XL 1958-1978Additional Information OEM No.65514-58

XL finned header clamp set is investment cast aluminum with a vibration finish on a shot peen natural surface.*NOTE: Tighten set with 5/16" allen screws that are provided, the front and rear are the...

XLCH exhaust mount kit includes clamps and frame support tube and accepts mufflers.Kit includes a chrome front pipe clamp, a stainless steel exhaust header clamp set, a chrome 1-7/8" heavy muffler...

Carburetor support bracket features a zinc plated finish.For Bendix an Keihin butterfly carburetors only, not for CV type. Fits:FL 1972-1984FLT 1985-1992XL 1972-1987Additional Information

XL motor mount plate set is constructed of raw steel. Set includes right and left plate set used to incorporate mount ports to accept late model forward controls. Fits:XL 1957-1981Additional...

2 piece front lower motor mount plates features a black finish.Sold in a quantity of 2. Fits:XL 1952-1981Additional Information UOM1 - SET

Raw side mount tail lamp bracket is best used with a vertical plate, for XL models. Fits:XL 1971-1985Additional Information UOM1 - EA

Chrome side mount tail lamp bracket is best used with a vertical plate, for XL models. Fits:XL 1971-1985Additional Information UOM1 - EA <

Regulator rectifier mount is for a 12 volt Bosch generator and has a chrome finish. Fits:XL 1958-1978FL 1958-1969Additional Information UOM1 - E