S&S Cycle

This is an Open Box/ Incomplete item.The backing plate gasket is not included. Features: For stock and S&S fuel system applications Kits include backing plate, filter and hardware Built-in...

S&S Cycle - Super E/G Fuel Inlet Seat for 1.875” E & 2.0625” G Carb Features: .160" Fuel inlet seat for Super E & G carburetors Made in the USA

S&S Cycle - Super E/G Carburetor Swivel Fuel Inlet Features: Made from the highest-quality materials available Made in the USA

S&S Cycle - Super E/G Basic Carburetor Rebuild Kit Features: Rebuild kit for S&S carburetors Made in the USA

S&S Cycle - Super E/G Carburetor Bowl Features: Carburetor bowl for Super E & G carburetors Made in the USA

S&S Cycle - Super E/G Accelerator Pump Bellows Seal Features: Bellows seal for accelerator pump for Super E & G carburetors Made in the USA

S&S Cycle - Stock Heads Intake Manifold O-Ring fits '84-'16 Big Twin, '86-'16 Sportster Models (OEM #26992-99, 26995-86A) Features: Sold Each Made from the highest-quality materials...

S&S Cycle - Super B/E/G Float Bowl Slotted Screws - 10 Pack Features: 10-24 X 3/4" Zinc-plated steel slotted screws with Lock Washers Made in the USA

S&S Cycle - Hydraulic Tappets fits '91-'99 Sportster Models - Set of 4 Features: Features precision-hardened ball-type check valve to provide superior sealing and lash control Valve seal...

S&S Cycle - Idle Air Control Motor Kit fits '01-'05 Big Twin, '02-'10 VRSC, '07-'20 Sportster, S&S X-Wedge w/ S&S SBEFI Models (OEM #27628-01, 27628-01A) Features: For single bore...

S&S Cycle - Air Temperature Sensor fits '99-'05 Big Twin Models (OEM #27270-95) Features: For single bore throttle bodies Made in the USA Fitment 2005 Harley-Davidson Softail...

S&S Cycle - Adjustable Carburetor Support Bracket Kit Features: Mounts from the center-case bolt between cylinders to the lower flange mount of the manifold Adjusts from 5-1/4" to...

S&S Cycle - HI-4N Ignition Module Kit fits '70-'99 Big Twin Models Features: Updated version of the popular Crane HI-4 ignition More power than the stock ignition Single-fire and dual-fire...

S&S Cycle - Billet Oil Pump Kit fits '92-'99 Evolution Big Twin Models Features: Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap...

S&S Cycle - Billet Oil Pump fits '70-'91 Big Twin Models Features: Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check...

S&S Cycle - Standard Cover Billet Oil Pump fits '36-'69 Big Twin Models Features: Kit includes oil pump, universal cover with top and bottom feeds, mounting bolts, supply and return gears,...

S&S Cycle - Replacement Billet Oil Pump Gasket Kit Features: Made in the U.S.A. Fitment 1999 Harley-Davidson Super Glide Sport FXDX - - 1999 Harley-Davidson FXR...

S&S Cycle - Oil Pump Replacement Gasket Kit fits '36-'69 Big Twin Models Features: Made in the U.S.A. Fitment 1991 Harley-Davidson Dyna Sturgis...

S&S Cycle - Rocker Arm Shafts fits '99-'17 Twin Cam & '86-'22 Sportster Models (Except RH Sportster (OEM #17611-83)) Features: Made in the U.S.A...

S&S Cycle - Rocker Box Gasket Kit fits EVO Big Twin Models Features: Replacement gasket kit for rocker box part number 90-4095 Fitment 2000 Harley-Davidson FXR...

S&S Cycle - Rocker Box Gasket Kit fits Twin Cam Models Features: Includes all required gaskets and O-rings for both rocker boxes Fitment 2017 Harley-Davidson Road King Special...

S&S Cycle - Solid Lifter Conversion Kit fits '66-'84 Shovelhead Model Features: Converts stock hydraulic lifters to adjustable solids Kit includes four nonadjustable steel pushrods, four...

S&S Cycle - Compression Release Hole Plug Features: Not for use on OEM heads Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S...

S&S Cycle - Natural Generator Gear Cover fits '40-'E48 Panhead Style Features: Fit most generator motors; styled after the OEM types below Cast construction with a natural finish Include...

S&S Cycle - Natural Generator Gear Cover fits '54-'62 Panhead Features: Fit most generator motors; styled after the OEM types below Cast construction with a natural finish Include gasket...

S&S Cycle - Idler Gearshaft fits Big Twin Models (OEM #25791-36) Features: Includes circuit breaker drive gear, idler gear assembly and circuit breaker shaft gear with shims Circuit breaker...

S&S Cycle - 12" Fuel Line Insulator Features: Made in the USA

S&S Cycle - Valve Spring Kit fits '48-'84 Big Twin Models Features: To be used with cams with up to .550" lift Includes springs and aluminum top retainers 140-lb. seat pressure Must allow...

S&S Cycle - Adjustable Pushrods fits '99-'17 Twin Cam Models Features: .4375" diameter chromoly steel for maximum strength Rocker boxes must be removed for installation or removal Made in...

S&S Cycle - Tappet Alignment Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Big Twin Evolution tappet blocks do not have counter-bored bolt holes; therefore, when a tappet...

S&S Cycle - 20W-50 High Performance Synthetic Engine Oil - 1 U.S. quart Features: Resists extreme heat in large displacement, air-cooled engines Added moly content to reduce heat, friction...

S&S Cycle - Rocker Cover Wrench Set Features: Four wrenches of different lengths for those hard-to-get-to rocker box screws For use on all Big Twin and XL Evolution-style motors Made in the...

S&S Cycle - Adjustable Pushrods fits '91-'22 Sportster Models (Except RH Sportster) Features: .4375" diameter chromoly steel for maximum strength Rocker boxes must be removed for...

S&S Cycle - Adjustable Pushrods fits '84-'99 Evolution Big Twin Models Features: .4375" diameter chromoly steel for maximum strength Rocker boxes must be removed for installation or...

S&S Cycle - Cylinder Head Temp Sensor fits Twin Cam and Super Sidewinder Plus (OEM #32446-99) Features: The S&S system makes use of crank position sensor, cam position sensor if present,...

S&S Cycle - Map Sensor (OEM #32316-99) Features: The S&S system makes use of crank position sensor, cam position sensor if present, MAP sensor, cylinder head temperature sensor and an...

S&S Cycle - Crank Position Sensor (OEM #32707-01B, 32707-01C) Features: The S&S system makes use of crank position sensor, cam position sensor if present, MAP sensor, cylinder head...

S&S Cycle - Trap Door fits '86-'99 Evolution-Style S&S Transmission Cases or Stock Application Features: Billet construction Kit includes bearings and hardware Made in the U.S.A...

S&S Cycle - Super G Carburetor Rebuild Kit Features: Rebuild kit for S&S carburetors Made in the USA

S&S Cycle - 50-State 2-into-1 Sidewinder® Exhaust System fits M8 Models - Lava Chrome Features: Smokey chrome with all the reflective qualities of traditional chromium Durable and easy...