Softail Deuce FXSTD

Jims - 1167 Balancer Shaft/Removal Bearing Tool fits '00-'06 Twin Cam “B” Motors Models Features: Installing portion is designed to push on the outer diameter of bearings preventing any damage to the bearing or it's bore Pulls the...

FLHRS Jims - 2043 41mm Fork Nut Socket fits '48-'17 Wide Glide Models Features: Eliminates possible burring of plug caused by wrenches Used to remove and install top fork-tube plug Fits 41 mm forks Made in the U.S.A...

Jims - 1705 Exhaust Drill Plate fits '84-'17 Big Twin (Except M-Eight), '86-'22 Sportster & '94-'09 Buell Models (Except 1125R) Features: Will position the seal evenly into the exhaust port of head Tool can be used with exhaust flange nuts Made...

Jims - 1034 Sprocket Shaft Holder fits '55-'99 Big Twin & '99-'06 Twin Cam (Except '06 Dyna) Features: Used to hold flywheel assembly in vise, with or without left case attached Made in the U.S.A...

Jims - 95760-57 Bushing Bearing Puller fits '66-'17 Big Twin (Except M-Eight), '57-'22 Sportster & Buell Models (Except 1125R) Features: Used to remove rocker bushing or bearing in one easy operation Made in the U.S.A...

Jims - 33443-84 Tappet Aligning Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Can also be used to align rocker box bases on Evolution head (requires two tools) Also used in Harley-Davidson® Twin Cam oil pump alignment...

Jims - 2260 Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive Features: Lock the transmission pulley for removing or installing pulley nut Made in the U.S.A...

Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models Features: Installs transmission shaft without the use of a hydraulic or arbor press Made in the U.S.A. Fitment 2008 Harley-Davidson Fat Bob...

Jims - 1288 Crankshaft Guide fits '99-'17 Twin Cam & '03-'09 Buell XB9R/X B9S Models Features: Spreads the crankcase pinion bearing rollers when reassembling right side case to the flywheel assembly Made in the U.S.A...

Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser) Features: Use to install steering head races, stock and custom, as well as install cups in the frame This tool pulls the races...

Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings. Fitment 2006 Harley-Davidson Street...

Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models Features: Removes old bearing straight and will not damage the transmission case Can be used without removing transmission from the bike Made in the U.S.A...

Jims - 2256 Drive Gear Seal Installation fits All 5-Speed Big Twin Models Features: Use to install main drive gear oil seal to the proper depth with transmission assembled Includes protective sleeve for seal, which can be used to protect main drive...

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...

Jims - 39361-69 Sprocket Shaft Seal Installation Tool fits '69-'10 Big Twin & Twin Cam Models Features: Designed to press oil seal over sprocket shaft into case Made in the U.S.A. Fitment 2010 Harley-Davidson Street Glide Trike...

Jims - 35316-80 5-Speed Main Drive Gear Tool fits '80-'06 Big Twin (Except '06 Dyna) & '91-'06 Sportster Models Features: Installs the main drive gear without removing the transmission Used to remove and install the main drive gear Made in the...

Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models Features: Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S...

Jims - 1280 Camshaft Bearing Puller fits '99-'06 Twin Cam (Except '06 Dyna) for Removal of Bearings, 'L00-'06 FXST/FL & 'L00-'05 FXD for Removal of Front Cam Bearing Features: Once the camshafts are removed from the support plate this tool will...

Jims - 955 Gauge for Harley-Davidson Injection Pressure fits '01-'20 Big Twin Models w/ Delphi EFI (Except '18-'20 Softails) Features: Includes all necessary parts to diagnose Delphi fuel injection; a large gauge assembly, 8" hose, 2" hose, fuel tank...

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and installs steering head bearing race on 84-16 Big Twin...

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice Hardened ball bearing style tip at valve head end...

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the...

Jims - 1051 Wrist Pin Bushing Tool fits '99-'06 Twin Cam Models Features: Used to remove and install wrist pin bushings without removing connecting rods from crankcases Comes with instructions Made in the U.S.A...

Jims - 1283 Camshaft Chain Tensioner Tool fits '99-'06 Twin Cam Models (Except '06 Dyna) Features: Designed to unload the pressure on the primary and secondary chain tensioners to assemble and disassemble cams Also checks spring loads on chain...

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits '99-'13 Touring (Except H-D FL Trike), '00-'17 Softail (Except FXS/​FXCW/​FXCWC), '00-'05 FXDWG Models (OEM #45890-97, 45930-00) Features: Designed to fit a wide variety of models Made in...

Colony - Fork Stem Nut Cap for '80-'11 Wide Glide (OEM #45670-80) Features: Made in the U.S.A. Fitment 2013 Harley-Davidson Breakout FXSB - - 2012-2013 Harley-Davidson Softail Slim...

Colony - Head Bolt Set fits '99-'17 Twin Cam & '92-'22 Sportster Models (Except RH Sportster (OEM #16478-85A, 16480-92)) Features: 12-point replacement headbolts Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Softail Slim S...

Custom Dynamics - ProBEAM® LED Halo Fog Light fits '99-'13 Big Twin Models Features: Utilize Cree LEDs to produce a superior beam pattern with a super-bright white LED halo Easily mount to engine guards with ProBEAM® Tube clamps (PART #s...

Thrashin Supply - Apex Mini Floorboards Features: Billet 6061 aircraft grade aluminum Stainless steel or aluminum clevis Made in the U.S.A. Will not work on '18-'23 M8 Softail rear. Hits on primary...

Drag Specialties - 12½" Shift Linkage fits '86-'17 Softail Models (Exc. '97-'99 Softail Heritage Springer Models) The rod length of this shifter linkage is measured from the center of the hole to the center of the stud with the adjusters...

Thrashin Supply - Essential Saddlebags Features: Made of 1680D Denier Ballistic Nylon Lightly Structured to hold shape Easy on, Easy off installation MOLLE Attachments for Universal anchoring points to secure the bag down, as well as, use for...

Thrashin Supply - Escape Saddlebags  Features: Easy-on, easy-off installation Made from 1680-denier ballistic nylon Structured to hold shape MOLLE attachments for universal anchoring points to secure the bag down as well as use for additional...

Drag Specialties - Inner Primary Mainshaft Bearing/Seal Kit fits '89-'99 Evolution Big Twin & '99-'06 Big Twin Models (Exc. Dyna Glide Models) This kit comes with a pinion seal, a main shaft seal, bearing snap rings, an inner bearing race and a...

All Balls Racing - Fuel Pump Rebuild Kits fits '04-'07 Touring & '04-'07 Softail Models (Long Pump/ 3.00") All Balls' Fuel Pump Rebuild Kits come complete with all the required pump, filter, hose (s), clamp (s) and wiring harness as needed per model...

GMA - Classic Chrome 2-Piston Front Brake Caliper fits Paughco Custom Springers W/ Single Flange Hub Wheel These front brake calipers are constructed with billet aluminum with a smooth or classic "fin" design. The single-disc applications require the...

Thrashin Supply Thrashin' Supply - Billet Shifter Lever fits '99-'24 Touring, '08-'24 H-D FL Trike & '00-'17 Softail Models Thrashin' Supply Co.'s Billet Shifter Levers are compatible with all of Thrashin's Shifter Tips; they come complete with ARP...

Performance Machine - Chrome Vision Series Air Cleaner fits '01-'17 Twin Cam EFI Models and '99-'06 CV Carb - Cable Throttle Features The UV and abrasion resistant polycarbonate lens is framed by a bezel to add structural integrity as well as provide...

Thrashin Supply - Twice-Cut Clutch/Brake Perch Clamps The Thrashin Supply Clutch/Brake Perch Clamps are built to work with stock Harley-Davidson® clutch and brake perches on 1" bars. Comes in a left and right pair. Features CNC Machined of 6061...

Willie and Max - Swingarm Bags with Brass Buckles fits '84-'17 Softail Models These Swingarm Bags are made with 100% leather right here in the U.S.A. Features Made in USA Durable leather swingarm bag construction uses OEM quality black leather and black...