Softail Night Train FXSTB

DP - High-Performance Steel Clutch Plates fits '90-'17 Big Twin Models (Exc. Models W/ Slipper/Assist Clutch) (Repl. OEM #s 37913-98 & 37913-90) The DP High-Performance Steel Clutch Plates will neither expand nor fade or promote clutch swell. Qty...

Hawg Halters - Red 6-Piston Front Direct Bolt-On Single Disc Brake Caliper for 13" Rotors fits '00-'21 Models (Exc. Springers & '06-'17 Dyna Models) Hawg Halters' 6-Piston Front Direct Bolt-On Brake Calipers are equipped with differential bore...

Jagg - Deluxe Diamond Cut Oil Cooler System This special edition oil cooler kit is as spectacular and durable as the gem it is named after. It is the perfect solution for Harleys with perimeter, vertical frame tubes. This cooler mounts to the left frame...

Dunlop American Elite MH90-21 Front Tire These American Elite tires by Dunlop are size MH90-21 and are made for use on Harley Touring and Cruiser type models. Features: The only replacement motorcycle tires for Harley-Davidson® bikes...

Features: Billet 6061 aluminum Drilled with 1/2" hole for internal wiring Works with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Base hole tapped for standard 1/2-13 mounting bolts (bolts not included) Fits...

The H2 Bars look good on everything!  Features 1-inch O.D. x 0.120 wall seamless 4130 chromoly tubing with precision mitered and TIG welded joints. Threaded bungs on vertical uprights are CNC-machined chromoly steel with1/2-13 t.p.i. holes to...

Arlen Ness - 12-Point Titanium Rocker Box Bolt Kit Features: 12-Point rocker box bolt kits that are CNC machined from solid titanium Each titanium 12-Point bolt is meticulously CNC machined, featuring a spot drilled bolt head & lightning hole...

Arlen Ness - 12-Point Titanium Cam Cover/Point Cover Bolt Kit Features: 12-point bolts feature a spot drilled bolt head & lightning hole design on the bolt flange M8 kits include all needed bolts for both the engine's cam cover & point...

Thrashin Supply Co. - Aggressor Foot Pegs Features: Designed to provide the maximum amount of grip and improve ground clearance while maintaining a sleek and timeless design Twelve replaceable cone-shaped stainless steel cleats per footpeg Cutaway...

1FNGR - Signature Series Adjustable Easier Pull Clutch + Brake Lever Combo fits Dyna/Softail Models Features: Full range of quick adjustability smooth 2 finger lever design for improved comfort Easier pull over OEM by (30%) average Built in mirror...

ODI - Ruffian Lock-On Harley Grips - Cable Throttle Features: Moto inspired grip designed for performance V-Twin models Legendary Ruffian full-knurl diamond pattern Thin profile delivers amazing control, feedback and traction Proprietary...

Vance & Hines - Weaved Carbon Fiber VO2 Falcon Air Intake Kit fits '99-'07 Touring (Except '99-'01 Touring Fuel Injection w/ Lower Fairings), '00-'15 Softail (Except '11-'15 CVO), '99-'17 Dyna Models (Except '16-'17 FXDLS) Features: Clean...

Le Pera - Silhouette Deluxe Solo Seat fits '00-'05 FXST & '00-'07 FLST/N Models (Except FXSTD, '07 FLSTF) Features: Heavily contoured 12" W rider area creates perfect day cruising comfort Offers the flow and sleekness of the Silhouette...

James Gasket - Rocker Housing Gasket fits '99-'17 Twin Cam Models (OEM #16719-99A, 16719-99B) Features: Strategically placed elastomer beading helps ensure a positive seal while our clear silicone conformal coating fills in minor imperfections in the...

James Gasket - Rocker Cover Gasket fits '99-'17 Twin Cam Models (OEM #17386-99A) Features: Strategically placed elastomer beading helps ensure a positive seal while our clear silicone conformal coating fills in minor imperfections in the flanges and...

Jims - 939 Sealed Wheel Bearing Tool fits '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-ROD Models Features: Removes and installs 3/4", 1" and 25 mm wheel bearing with or without Anti-Locking Brake System (ABS) Made in the U.S.A...

Jims - 768 5-Speed Transmission Case Shifter Shaft Seal Installer fits '80-'99 Big Twin, '99 Twin Cam, '99-'06 FXST & '99-'05 FLT/F LHT/​FXD Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and...

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 5502 Ultimate Clutch Adjusting Tool fits '85-'20 Big Twins Models w/ Mechanical Clutch Features: Allows the quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change position No more guessing or...

Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in...

Jims - 967 Inner Primary Bearing and Seal Remover/Installer Tool fits 'L84-'06 FXST/​FLST & '85-'06 Touring & Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer...

Jims - 976 Engine Rotator Tool fits '55-'06 Big Twin Models (Except '06 Dyna Glide) Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and...

Jims - 956 Replacement Sleeve Timken Case Bearing Tool Features: Sleeve is several times stronger than stock aluminum case material that standard bearings ride in Replacement sleeve kit for Timken® Case Bearing Tool Made in the...

Jims - 1664 5-Speed Transmission Shifter Shaft Sleeve Tool fits '80-'83 FLT/​FLHT/​FXR, '84-'99 Big Twins & '84-'00 FLHT/​FXR/​FXD Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use...

Jims - 1147 Alternator Rotor Puller fits '97-'06 Big Twin Models Features: A must-have tool for 45A charging systems; will also work on any Harley-Davidson® alternator system that has threaded puller holes Tool protects threads on sprocket shaft...

Jims - 2240 Head Holder Guide Tool '48-'04 Big Twin, '57-'03 Sportster & Some SE CVO Twin Cam Models (5/16” Valve Guides) Features: Adapters are supported by a stand that makes it easy to press valve guides in and out A special guide...

Jims - 1162 Caliper Piston Remover fits '00-'07 Big Twin & '00-'03 Sportster 4-Piston Front/​Rear Calipers Models Features: Prevents damage to pistons and cylinders when installing new seals and wipers Holds pistons square in their cylinder...

FLHRS Jims - 2043 41mm Fork Nut Socket fits '48-'17 Wide Glide Models Features: Eliminates possible burring of plug caused by wrenches Used to remove and install top fork-tube plug Fits 41 mm forks Made in the U.S.A...

Jims - 1705 Exhaust Drill Plate fits '84-'17 Big Twin (Except M-Eight), '86-'22 Sportster & '94-'09 Buell Models (Except 1125R) Features: Will position the seal evenly into the exhaust port of head Tool can be used with exhaust flange nuts Made...

Jims - 1034 Sprocket Shaft Holder fits '55-'99 Big Twin & '99-'06 Twin Cam (Except '06 Dyna) Features: Used to hold flywheel assembly in vise, with or without left case attached Made in the U.S.A...

Jims - 95760-57 Bushing Bearing Puller fits '66-'17 Big Twin (Except M-Eight), '57-'22 Sportster & Buell Models (Except 1125R) Features: Used to remove rocker bushing or bearing in one easy operation Made in the U.S.A...

Jims - 33443-84 Tappet Aligning Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Can also be used to align rocker box bases on Evolution head (requires two tools) Also used in Harley-Davidson® Twin Cam oil pump alignment...

Jims - 2260 Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive Features: Lock the transmission pulley for removing or installing pulley nut Made in the U.S.A...

Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models Features: Installs transmission shaft without the use of a hydraulic or arbor press Made in the U.S.A. Fitment 2008 Harley-Davidson Fat Bob...

Jims - 1288 Crankshaft Guide fits '99-'17 Twin Cam & '03-'09 Buell XB9R/X B9S Models Features: Spreads the crankcase pinion bearing rollers when reassembling right side case to the flywheel assembly Made in the U.S.A...

Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser) Features: Use to install steering head races, stock and custom, as well as install cups in the frame This tool pulls the races...

Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings. Fitment 2006 Harley-Davidson Street...

Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models Features: Removes old bearing straight and will not damage the transmission case Can be used without removing transmission from the bike Made in the U.S.A...

Jims - 2256 Drive Gear Seal Installation fits All 5-Speed Big Twin Models Features: Use to install main drive gear oil seal to the proper depth with transmission assembled Includes protective sleeve for seal, which can be used to protect main drive...