Bagger Parts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Out of stock
Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models
Jims
$276.10Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in...$276.10 -
Out of stock
Jims - 995 Case Splitter Tool fits '07-'17 Twin Cam & '06 Dyna Models
Jims
$418.20Jims - 995 Case Splitter Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: "Breaks" the case sealant by pushing apart both case halves Uses included hand thread-in pushing screw Flywheels will be pushed from the left case Bolts to primary...$418.20 -
Out of stock
Jims - 988 Valve Spring Compressor fits '05-'17 Twin Cam (Except SE Models), '04-'22 Sportster (Except RH Sportster) & Buell Models (Except 1125R)
Jims
$124.35Jims - 988 Valve Spring Compressor fits '05-'17 Twin Cam (Except SE Models), '04-'22 Sportster (Except RH Sportster) & Buell Models (Except 1125R) Features: Used to remove and replace valve and new-style conical valve spring Requires use of JIMS...$124.35 -
Out of stock
Jims - 967 Inner Primary Bearing and Seal Remover/Installer Tool fits 'L84-'06 FXST/FLST & '85-'06 Touring & Dyna Models
Jims
$264.45Jims - 967 Inner Primary Bearing and Seal Remover/Installer Tool fits 'L84-'06 FXST/FLST & '85-'06 Touring & Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer...$264.45 -
Out of stock
Jims - 975 Engine Rotator Tool fits '07-'17 Twin Cam & '06 Dyna Glide Models
Jims
$172.95Jims - 975 Engine Rotator Tool fits '07-'17 Twin Cam & '06 Dyna Glide Models Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and...$172.95 -
Out of stock
Jims - 976 Engine Rotator Tool fits '55-'06 Big Twin Models (Except '06 Dyna Glide)
Jims
$173.55Jims - 976 Engine Rotator Tool fits '55-'06 Big Twin Models (Except '06 Dyna Glide) Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and...$173.55 -
Out of stock
Jims - 956 Replacement Sleeve Timken Case Bearing Tool
Jims
MSRP: $255.95$245.25Jims - 956 Replacement Sleeve Timken Case Bearing Tool Features: Sleeve is several times stronger than stock aluminum case material that standard bearings ride in Replacement sleeve kit for Timken® Case Bearing Tool Made in the...MSRP: $255.95$245.25 -
Out of stock
Jims - 1664 5-Speed Transmission Shifter Shaft Sleeve Tool fits '80-'83 FLT/FLHT/FXR, '84-'99 Big Twins & '84-'00 FLHT/FXR/FXD Models
Jims
MSRP: $54.95$54.60Jims - 1664 5-Speed Transmission Shifter Shaft Sleeve Tool fits '80-'83 FLT/FLHT/FXR, '84-'99 Big Twins & '84-'00 FLHT/FXR/FXD Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use...MSRP: $54.95$54.60 -
Out of stock
Jims - 2240 Head Holder Guide Tool '48-'04 Big Twin, '57-'03 Sportster & Some SE CVO Twin Cam Models (5/16” Valve Guides)
Jims
$943.95Jims - 2240 Head Holder Guide Tool '48-'04 Big Twin, '57-'03 Sportster & Some SE CVO Twin Cam Models (5/16” Valve Guides) Features: Adapters are supported by a stand that makes it easy to press valve guides in and out A special guide...$943.95 -
Out of stock
Jims - 1110 0.105" Camshaft Pinon Gauge Pins fits '54-'89 Big Twin Models
Jims
$44.95Jims - 1110 0.105" Camshaft Pinon Gauge Pins fits '54-'89 Big Twin Models Features: Use to check pinion gear for pitch diameters Check service manual for sizing chart Made in the U.S.A. Fitment 1989 Harley-Davidson Electra Glide Ultra...$44.95 -
Out of stock
Jims - 1705 Exhaust Drill Plate fits '84-'17 Big Twin (Except M-Eight), '86-'22 Sportster & '94-'09 Buell Models (Except 1125R)
Jims
MSRP: $183.95$148.05Jims - 1705 Exhaust Drill Plate fits '84-'17 Big Twin (Except M-Eight), '86-'22 Sportster & '94-'09 Buell Models (Except 1125R) Features: Will position the seal evenly into the exhaust port of head Tool can be used with exhaust flange nuts Made...MSRP: $183.95$148.05 -
Out of stock
Jims - 1034 Sprocket Shaft Holder fits '55-'99 Big Twin & '99-'06 Twin Cam (Except '06 Dyna)
Jims
$184.95Jims - 1034 Sprocket Shaft Holder fits '55-'99 Big Twin & '99-'06 Twin Cam (Except '06 Dyna) Features: Used to hold flywheel assembly in vise, with or without left case attached Made in the U.S.A...$184.95 -
Out of stock
Jims - 1745 Bearing Simulator fits '70-'02 Big Twin Models
Jims
$107.95Jims - 1745 Bearing Simulator fits '70-'02 Big Twin Models Features: Designed to allow quick and easy removal and replacement of flywheel assembly in the left-side crankcase when checking rod-to-case, piston-to-flywheel or cylinder-to-flywheel...$107.95 -
Out of stock
Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models
Jims
$126.95Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models Features: Installs transmission shaft without the use of a hydraulic or arbor press Made in the U.S.A. Fitment 2008 Harley-Davidson Fat Bob...$126.95 -
Out of stock
Jims - 1288 Crankshaft Guide fits '99-'17 Twin Cam & '03-'09 Buell XB9R/X B9S Models
Jims
$53.20Jims - 1288 Crankshaft Guide fits '99-'17 Twin Cam & '03-'09 Buell XB9R/X B9S Models Features: Spreads the crankcase pinion bearing rollers when reassembling right side case to the flywheel assembly Made in the U.S.A...$53.20 -
Out of stock
Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models
Jims
$367.95Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models Features: Tool is used to remove the sprocket shaft Timken® bearing on late '86-'02 Big Twins with an integral sprocket shaft Does the job better than anything else on the...$367.95 -
Out of stock
Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models
Jims
$382.20Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models Features: Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S...$382.20 -
Out of stock
Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84)
Jims
$82.95Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...$82.95 -
Out of stock
Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70))
Jims
MSRP: $77.95$77.35Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking...MSRP: $77.95$77.35 -
Out of stock
Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam)
Jims
$651.95Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam) Features: Use on all Big Twin '54-'99 single cam only, (NOTE: Includes aftermarket motors, also XL '57 to early '84 idler gear bushing) Designed to line-ream...$651.95 -
Out of stock
Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam)
Jims
$149.95Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam) Features: Holds cam cover flat and helps prevent damage/scratches when removing and installing bushings Clamps in vice or Bridgeport™ mill Made in the U...$149.95 -
Out of stock
Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R)
Jims
$197.95Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R) Features: Use to remove and install wrist pin bushings without removing rods from crankcase Made in the U.S.A...$197.95 -
Out of stock
Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models
Jims
$296.75Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing Made in the U.S.A...$296.75 -
Out of stock
Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73)
Jims
MSRP: $77.95$77.35Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking dowel pin Made...MSRP: $77.95$77.35 -
Out of stock
Jims - 1030-TS Crank Pin Flywheel Socket fits 'L83-'99 Big Twin Models (OEM #23969-83)
Jims
$117.95Jims - 1030-TS Crank Pin Flywheel Socket fits 'L83-'99 Big Twin Models (OEM #23969-83) Features: Machined for 100% nut-to-socket and drive-end contact Eliminate nut rounding and risk of injury Made in the U.S.A...$117.95 -
Out of stock
Uni Filter - Air Filter fits '80-'82 FLT, '82-'83 FXR, 'L78-'82 Sportster 1000, 'L78-'84 FX, FL & FLH Models (OEM #29255-78)
Uni Filter
$26.95Uni Filter - Air Filter fits '80-'82 FLT, '82-'83 FXR, 'L78-'82 Sportster 1000, 'L78-'84 FX, FL & FLH Models (OEM #29255-78) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing...$26.95 -
Out of stock
V-Twin - Panhead Style Evolution Rocker Box Set fits '84-'99 FXST/FLST, '84-'98 FLT/FXD Models - Chrome
V-Twin Mfg
$1,257.91V-Twin - Panhead Style Evolution Rocker Box Set fits '84-'99 FXST/FLST, '84-'98 FLT/FXD Models - Chrome Panhead Evolution rocker box set features a bolt on Panhead look for Evolution models and a chrome finish. Retro conversion kit includes chrome...$1,257.91 -
Out of stock
Dynojet - Recalibration Jet Kit fits '90-'95 Sportster 883/1200 Models
Dynojet
$188.88Dynojet - Recalibration Jet Kit fits '90-'95 Sportster 883/1200 Models Features: Include the jets, needles, instructions, etc. necessary to recalibrate stock engines with CV carbs Recalibrate your stock Keihin CV carb to make full use of the...$188.88 -
Out of stock
Belt Drives Ltd. - BDLPCP-0007 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '90-'97 Evolution Big Twin Models
Belt Drives Ltd.
$368.15Belt Drives Ltd. - BDLPCP-0007 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '90-'97 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt drives listed Include all friction plates, drive plates...$368.15 -
Out of stock
Drag Specialties - Oil Pressure Gauge Mount fits 80” Evolution Engines (Except FLT/HT/HS/HR/Ultra)
Drag Specialties
$37.05Drag Specialties - Oil Pressure Gauge Mount fits 80” Evolution Engines (Except FLT/HT/HS/HR/Ultra) Features: Chrome mount attaches at the crankcase and rocker box mounting bolt, allowing an unobstructed view of your oil pressure Stock oil...$37.05 -
Out of stock
Colony - Replacement Cylinder Stud Set fits '99-'17 Twin Cam Models (OEM #16834-99/A)
Colony Machine
$88.95Colony - Replacement Cylinder Stud Set fits '99-'17 Twin Cam Models (OEM #16834-99/A) Features: Heat-treated for strength and durability Equal or surpass original equipment Fitment 2016-2017 Harley-Davidson Softail Slim S...$88.95 -
Out of stock
Colony - Front Axle Spacer fits '84-'95 FXST/C/B, '91-'94 FXDWG, '84-'98 FLT/FLHT Models (Except FLHR/CI (OEM #40910-84A, 40910-84B))
Colony Machine
$35.95Colony - Front Axle Spacer fits '84-'95 FXST/C/B, '91-'94 FXDWG, '84-'98 FLT/FLHT Models (Except FLHR/CI (OEM #40910-84A, 40910-84B)) Features: Kit includes polished/chrome-plated finish spacers, nuts and machined washers Made in the U.S.A...$35.95 -
Out of stock
Colony - 11/16"-16 Acorn/Oversized Timing Plug Crankcase/Oil Tank with Special Tap fits '86-'95 Sportster Models
Colony Machine
$51.95Colony - 11/16"-16 Acorn/Oversized Timing Plug Crankcase/Oil Tank with Special Tap fits '86-'95 Sportster Models Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug...$51.95 -
Out of stock
Drag Specialties - 41MM Hard Chrome Fork Tubes W/ 24.25" Length fits '84-'17 Touring, Dyna & Softail Models
Drag Specialties
$347.70Drag Specialties - 41MM Hard Chrome Fork Tubes W/ 24.25" Length fits '84-'17 Touring, Dyna & Softail Models Features Highly durable hard chrome finish Offer less drag and improved seal wear Accepts all OEM components Sold in...$347.70 -
Out of stock
Drag Specialties - 44" Black Vinyl Throttle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length
Drag Specialties
$44.47Drag Specialties - 44" Black Vinyl Throttle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an...$44.47 -
Out of stock
Drag Specialties - 78-11/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin, '86-'13 Sportster Models (Except '06 Dyna Glide) - Alternative Length
Drag Specialties
$76.27Drag Specialties - 78-11/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin, '86-'13 Sportster Models (Except '06 Dyna Glide) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel...$76.27 -
Out of stock
Drag Specialties - Brake Caliper ' 00-'07 Touring, Dyna, Softail, '00-'03 Sportster Models
Drag Specialties
$306.55Drag Specialties - Brake Caliper ' 00-'07 Touring, Dyna, Softail, '00-'03 Sportster Models Features: Rear calipers accept OEM bolts, shims bushing and retainer (not included) Complete with all necessary mounting hardware OEM-style...$306.55 -
Out of stock
Hofmann Designs - Mini Floorboards Std. Male Mount
Hofmann Designs
$395.95Hofmann Designs - Mini Floorboards Std. Male Mount Hofmann Designs' signature series mini floorboards are built to be one-of-a-kind whilst maintaining overall performance. Features Machined in house from 6061 Aluminum Black Hard Coat...$395.95 -
Out of stock
Galfer - 11.8" Front Brake Rotor Full-Floating W/ Black Carrier & Gold Buttons fits '06-'21 Dyna, Sportster & Touring Models
Galfer
$346.95Galfer - 11.8" Front Brake Rotor Full-Floating W/ Black Carrier & Gold Buttons fits '06-'21 Dyna, Sportster & Touring Models Galfer's high-quality and patented Rotor is full-floating style to guarantee optimum brake pad-to-rotor contact,...$346.95 -
Out of stock
Galfer - 11.8" Front Brake Rotor Full-Floating W/ Black Carrier & Red Buttons fits '06-'21 Dyna, Sportster & Touring Models
Galfer
$346.95Galfer - 11.8" Front Brake Rotor Full-Floating W/ Black Carrier & Red Buttons fits '06-'21 Dyna, Sportster & Touring Models Galfer's high-quality and patented Rotor is full-floating style to guarantee optimum brake pad-to-rotor contact,...$346.95
Harley Bagger Parts
Upgrade your ride with top-quality Harley Bagger parts built for style, performance, and long-haul reliability. Whether you're customizing a Road Glide, Street Glide, Road King, Electra Glide, or any other Touring model, our collection of Performance Bagger parts is ready to help you fine-tune every detail.
From suspension and exhaust upgrades to lighting, foot controls, and touring essentials — we stock the gear serious riders trust to push farther and ride harder. Whether you're building a show-stopping custom or dialing in comfort for long-distance rides, these Harley Bagger parts deliver the fit and function your bike deserves.
Don’t settle for stock. Explore our full lineup of performance Harley Bagger parts and take your Touring build to the next level.