Lindby - 1416 - Unibar® - ChromeFeaturesTraditional OEM-style highway barsMade from high-quality 1-1/4" high-tensile steel tubingEasy installation with included hardwareNot recommended for use with extended forward controls or extended floorboardsFitment...

Lindby - BL1316 - Multibar® - Black - FL/FXFeaturesMade from a single piece of high-strength 1-1/4” steel tubing for long-lasting durabilityBuilt-in bonded rubber footrests that provide traction and allow riders to adjust their positionHighway bar with...

Lindby - 1316 - Multibar® - Chrome - FL/FXFeaturesMade from a single piece of high-strength 1-1/4” steel tubing for long-lasting durabilityBuilt-in bonded rubber footrests that provide traction and allow riders to adjust their positionHighway bar with...

Lindby - FB116-1 - Linbar® - Black - SoftailFeaturesFront bars are made from 1-1/4" high-strength steel for long-lasting durabilityPrecision bent and welded for a perfect fit every timeNeoprene o-rings provide traction in all climatesRear highway bars...

Lindby - BL116-1 - Linbar® - Gloss Black - SoftailFeaturesFront bars are made from 1-1/4" high-strength steel for long-lasting durabilityPrecision bent and welded for a perfect fit every timeNeoprene o-rings provide traction in all climatesRear highway...

Magnum Shielding - 3030C - Spark Plug Wires - Sterling Chromite - FXRFeaturesBraid perfectly matches all other Magnum cables and brake linesHigh-voltage, high temperature 8 mm silicone ignition wire with an OE style high-performance suppression conductor...

Arlen Ness - Black Method™ Clear Series Air Cleaner fits '17-'25 Harley M8 FLHRXS, '24 FLHTK/​FLTRK, '17-'23 Touring (Except '23 FLHXSE/​FLTRXSE), '17-'25 H-D FL Trike, '18-'24 Softail Models Features: Forged billet aluminum air cleaner...

Arlen Ness - 701-007 - Vented Gas Cap - 10 Gauge - TitaniumFeaturesCNC-machined from billet aluminumExclusive ratchet design provides proper torque and design alignmentFitment notes:Does not work with Original Equipment locking or tethered fuel caps or...

Arlen Ness - 701-006 - Vented Gas Cap - 10 Gauge - RedFeaturesCNC-machined from billet aluminumExclusive ratchet design provides proper torque and design alignmentFitment notes:Does not work with Original Equipment locking or tethered fuel caps or...

FXR Kickstand spring mount stud feature a zinc plated finish . Fitment: FXR 1991-1993

Clevis pin fits 1982-1986 FXR brake pedal assemblies. The pin is serrated on the shoulder end. Sold as a pack of 5. *NOTE: Accepts cotter pin (OEM #515) not included. Fitment: FXR 1982-1986

FXR/FLT starter plug for the starter pivot arm. Starter plug is 1/4 inch NPT x 15/32 length x 1/4 inch. Sold in a pack of 5. Instructions: http://www.vtwinmfg.com/Instructions/12/12-1783.pdf Fitment: FLT 1982-1988 FXR 1982-1988

FXR steel shifter lever features a chrome plated finish. Fitment: FXR 1982-1994

FXR stainless steel heel toe shifter lever is a one piece deseign for 5-speed models with mid controls. Includes 2 rubber pads. *NOTE: The distance from the center of the spline to the very end of the shorter side measures 4-1/2 inch and from the center...

FXRP chrome D-shaped footboards with ISO-pads installed. Footboard set is for use on FXRP and FXD models with footboards. Specifically for FXRP with footboards. Mounting bracket features 10 inch spacing. *NOTE: Does not have buttons for mount stops. ...

FXR kickstand mount bracket features a raw finish and must be welded in place. Accepts stock kickstand pin and spring. Fitment: FXR 1982-1994

Black exhaust bracket mounting block is for FXR models. Fitment: FXR 1982-1986

FXE rear exhaust mount kit includes a black bolt on style rear pipe bracket and zinc hardware. *NOTE: The bracket bolts to the pivot bolt hex bolts to replace the weld-on bracket. Fitment: FXR 1982-1994

Zinc plated FXR front exhaust mount bracket. . Fitment: FXR 1986-1994

FXR horn mount bracket is the later version with a zinc plated finish. Tech Notes: Suggested to use with #33-2116 Replica Replacement Horn Black Fitment: FXR 1984-1994

Exhaust bracket for FXR models features a raw finish. Support bracket is welded to the frame to house the isolator block available separately. *NOTE: Must order hardware separately. Fitment: FXR 1982-1994

FXR exhaust mount bracket. FXR exhaust mount bracket is mounted with (2) 7/16-20x1* pivot bolt cap screws. Our bracket mounting block can be bolted on to the opposing side using (2) 5/16-24x 5/8 bolts and 5/8-24 nyloc nuts. Hardware not included. *NOTE:...

Battery strap clamp for FXR models features a black finish. Includes nut that is welded in place. Use with 1/4 x 20 bolt 1-1/2 inch hex head and 1/4 x 20 jam nut. Fitment: FXR 1984-1988 FXR 1990-1994

Rear exhaust bracket is zinc plated and for use with FXR models. *NOTE: Must order additional hardware: 5/16 inch x 3/4 inch x 1 inch spacer 5/16 inch-18 x 2 inch and 5/16 inch-18 x 1-3/4 inch allen cap screws separately. Tech Notes: Required to use...

FXR pipe bracket kit includes a raw weld on type bracket and an ISO mount block. *NOTE: Bracket must be welded on. Fitment: FXR 1982-1994

FXR chrome 35mm flat top stem nut fits 35 inch and 39 inch fork stems. Tech Notes: Suggested to use with #24-0827 Lower Triple Tree Chrome. Fitment: Fx 1978-1984 FXR 1982-1994 XL 1978-1987

Silver dash panel decal set. Sold as a 2 piece set. Fitment: FXR 1982-1994

Sold as a pair. Fitment: FXR 1982-1994

Rear axle adjuster has a 3/4 inch inner diameter and includes heavy pull blocks and two 1/4 inch-20 x 2 inch full thread allen cap screws. Fitment: FXR 1982-1994

Side cover for a 5-speed transmission clutch features a black finish. Fitment: FXR 1987-1994

WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with...

FXRP footboard control kit includes a brake pedal chrome footboard set zinc plated frame mount brackets and a heel-toe shifter lever. Fitment: FXR 1982-1994

FXR brake plunger kit is a three piece kit that includes a plunger rod end brake plunger end and hex nut in a zinc finish. Fitment: FXR 1987-1994

FXR inner shift washer and seal kit is for the 1/2 inch diameter inner shift shafts. Sold as a 6 piece kit. Fitment: FXR 1982-1984

FXR shifter shaft bushing includes 4 o-ring alloy type with two bronze bushings on each end. Sleeve is used to replace the stock plastic part. Fitment: FXR 1984-1994

FXR shifter rod assembly features a zinc finish and includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation. Fitment: FXR 1982-1994

Zinc plated FXR pedal rod end 4 piece kit includes the rod end zinc clevis pin zinc 5/16 inch x 24 thread nut and a cotter pin. *NOTE: Measures 2-3/8 inch from the hole to the end of the thread. Fitment: FXR 1982-1987

FXR driver footpeg set features zinc plated peg shafts and includes the rubber set and mount bolt set. Sold as a pair. Fitment: FXR 1982-1994 XL 1986-2004

2023 New Production black kickstand is stock length and includes pin for FXR models. Fitment: FXR 1982-1990

FXRP shifter rubber set for heel toe shifter levers features a black finish and is the slip on type. Sold as a pair. Fitment: FXRP 1985-1994