Tool box mount tab is for right side mounting of the kidney tool box.Accepts 5/16" bolt. ...

Chrome auxiliary seat spring kit is used with rigid solo seats. This kit includes 7" springs, cross bar to mount to fender, and top strap to mount to seat.Solo seat spring kit includes 7" springs, clamp set, shoulder studs, and cross bar for all rigid...

2020 New Production oil tank bracket mounts the rear of oil tank to the fender and features a parkerized finish.*NOTE: New production with correct thickness and contour for ease of installation and best fit as an accurate replica. Fits:FL 1941-1957EL...

Throttle cable bracket has a parkerized finish and mounting hardware as original. Fits:EL 1938-1948FL 1941-1948UL 1938-1948Additional Information OEM No.56604-48 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages723

Regulator mount bracket attaches to engine mount and is made of steel with a chrome finish. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FL 1941-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages344

Replica tool box mount bracket. Fits:UL 1938-1947FL 1941-1954EL 1936-1940Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages625

Front engine mount block threads into regulator mount block.This chrome mount block acts as a nut for the front bolts and will mount the regulator. Sold in a quantity of 2. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1987FL 1941-1984Additional Information ...

Replica vertical tool box mount bracket kit features a raw finish and is for all rigid frames to mount on rectangular tool boxes.*NOTE: Includes 2 sets of mount pads that are tapped 5/16"-24 thread. The rectangular pads are correct for 1936-1937 models...

Replica chrome plated forged steel seat T features original construction and shape for an authentic look.NOTE: 2-stage steel bushings are removable and can be interchanged or replaced as necessary. T includes early flat grease fitting and fits 5/16" bolt...

Replica vertical tool box bracket.For rectangular shape tool box which mounts with a cross strap. For stock and most custom rigid frames constructied of 1" tubing. Bracket only, must be welded to frame. 5/16"-24 threaded welded pads not included, order...

Replica seat T features forged steel construction as original style with 2 positions for 1938-40 UL and EL models. Front bushing set included!NOTE: 2-stage steel bushings are removable and can be interchanged or replaced as necessary. Seat T accepts 5/16...

Replica cadmium seat post and T kit comes fully assembled with a heavy duty cadmium plated post and a black T with related hardware.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result...

Replica black seat post and T kit includes fully assembled post and forged steel seat T with related hardware.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping...

Replica chrome seat post and T kit includes fully assembled post and replica steel seat T with related hardware.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping...

Replica tool box cross bracket is two hole type. Fits:FL 1947-1953Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages625

Tool box mount kit includes the frame bracket with the cross piece.*NOTE: Pieces must be riveted together. Fits:U 1941-1947FL 1941-1947EL 1941-1947Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages625 Replacement...

Replica chrome seat tee includes 2 stage front bushing and 5/16" bolt.NOTE: 2-stage steel bushings are removable and can be interchanged or replaced as necessary. Seat T accepts 5/16 boot to fit through the bushing. Fits:UL 1941-1948W 1941-1952FL...

Replica black seat T with 2 stage front bushing and 5/16" bolt.NOTE: 2-stage steel bushings are removable and can be interchanged or replaced as necessary. Seat T accepts 5/16" bolt to fit through the bushing. Fits:UL 1941-1948W 1941-1952FL 1941-1964G...

Oil tank bracket mounts the rear of oil tank to the fender on rigid frame models. Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Parkerized rear oil tank to fender mount is used on wrap-around tanks.Rear oil tank mount installation will require drilling two new holes in the fender. Mount the oil tank first with front mount then space the frame as desired (close as possible, but...

Zinc tool box bracket for the right side. Fits:WL 1941-1952Additional Information OEM No.64450-41 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages814

Two piece tool box mount is used as a replacement for mounts on stock and custom rigid frames. Mounts tool box higher than one piece style bracket. Fits:UL 1936-1948FL 1948-1953EL 1936-1952Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA...

Solo seat T will mount police and buddy seats to all big twins with seat posts. Fabricated from square solid steel and features a black finish. Does not include bushing.Front spool has 3/8" hole for mounting, there is no grease fitting or bushing. The...

Chrome rear kickstand catch is a stock OE replacement.*NOTE: Screws not included. Fits:UL 1937-1946FL 1941-1946EL 1937-1940Additional Information OEM No.49580-36 UOM1 - EA FinishChrome ManufacturerV-Twin OriginImported 2025 Catalog Pages623

Replica rear fender mount u-clamps secure rear fender to frame cross tube.Sold in a quantity of 2. Fits:UL 1938-1947EL 1936-1940FL 1941-1957Additional Information OEM No.59800-36 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages615

Auxiliary seat spring yoke hook features a raw finish. Fits:UL 1938-1947EL 1936-1940FL 1941-1957Additional Information OEM No.52586-36 UOM1 - EA ManufacturerV-Twin OriginImported StyleStock 2025 Catalog Pages1252

1" chrome clamp set for early spotlamp. Fits:FL 1941-1957EL 1938-1940Additional Information OEM No.68702-38 UOM1 - SET MeasurementsAdditional InformationInner Diameter: 1"Outer Diameter: 1-1/4" ManufacturerV-Twin OriginImported 2025...

Replica three hole tool box cross bracket Fits:FL 1941-1947Additional Information OEM No.47386-41 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages625

Set includes a parkerized yoke hook and a raw back plate, which goes under the fender.Sold in a quantity of 2. Fits:UL 1938-1947EL 1936-1940FL 1941-1964Additional Information OEM No.52586-36 UOM1 - SET ManufacturerV-Twin OriginUSA StyleStock 2025...

Tool box cross bracket has two holes. Fits:FL 1941-1952Additional Information OEM No.47386-41 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages625

Bracket for beehive tail lamp is chrome. Fits:UL 1939-1946G 1939-1946EL 1939-1940FL 1941-1946Additional Information OEM No.68150-39 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages1133

Black rear kickstand catch with screws is a stock OE replacement. Fits:UL 1937-1946FL 1941-1946EL 1937-1940Additional Information OEM No.49580-36 UOM1 - EA FinishBlack ManufacturerV-Twin OriginImported 2025 Catalog Pages623

This wrap-around raw steel finish oil tank bracket kit is a replacement for the stock OE bracket. This 3 piece kit includes a 2 piece chain guard tab set, 1 front horseshoe and a three hole front mount.*NOTE: Must be welded on. Fits:FL 1941-1964EL...

Distributor wire clip replaces stock OE. Fits:FL 1941-1965EL 1936-1940UL 1938-1948Additional Information OEM No.9971 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages668

Timer cable to frame clamp. Fits:FL 1946-1969Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages668

Chrome front exhaust clamp set is for two into one single exhaust.Sold in a quantity of 2. Order bolt sets separately. Fits:FL 1941-1969EL 1936-1940Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

Zinc motor mount is for engines with cast Ironhead type only. The ends of the mounts are attached by bolts.Head bolt set for attaching the ends of the mount are sold separately. Fits:WL 1932-1952G 1932-1973Additional Information OEM No.16855-51 UOM1 -...

Black ride control bracket kit. Fits:FL 1941-1948EL 1938-1940Additional Information OEM No.11369-38 UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages1113

Auxiliary seat spring yoke hook chrome Fits:UL 1938-1947EL 1936-1940FL 1941-1964Additional Information OEM No.52586-36 UOM1 - EA ManufacturerV-Twin OriginImported StyleStock 2025 Catalog Pages1252

This wrap-around oil tank bracket is a replacement for the stock OE bracket. The bracket has a chrome finish. Fits:UL 1937-1947EL 1936-1940FL 1941-1957Additional Information OEM No.62585-36 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog...