Round raw tool box mount pad insert features 5/16"-24 UNF thread.NOTE: The round pad is for restoration correct for 1938-1940 models. Hardware not inlcuded. Fits:UL 1938-1940EL 1938-1940Additional Information UOM1 - SET ManufacturerV-Twin ...

Bracket comes in a set of three. Fits:EL 1936-1944FL 1936-1944WL 1936-1945Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages1172

6-1/2" Spring Fork headlamp includes a Cycle Ray lens and visor, nut installed.*NOTE: Center stud is coarse thread 7/16"-20. Fits:UL 1937-1948G 1936-1957WL 1936-1952EL 1936-1940FL 1941-1948Additional Information UOM1 - KIT ManufacturerV-Twin ...

Three piece horn mount bracket set. Fits:U 1945-1948FL 1945-1948Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages1172

Kit includes friction disc, fiber washer, friction disc bracket, rocker clutch disc, spider washers, tab washer, and a rocker clutch pedal nut. All components are parkerized. Fits:WLA 1941-1944WL 1938-1952G 1938-1946WLDR 1937-1941WLC 1945-1945WR...

Rear brake shoe kit includes shoes, wide cam, thrust washer, arm, and pivot stud. Fits:W 1941-1952Additional Information UOM1 - KIT LocationRear ManufacturerV-Twin OriginImported 2025 Catalog Pages794

45" 4-speed 3rd gear smallest size 23 tooth. Fits:G 1947-1954W 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

45" 4-speed 2nd gear middle size 27 tooth. Fits:G 1947-1964W 1941-1952Additional Information UOM1 - EA MeasurementsAdditional InformationThickness: .5730" ManufacturerV-Twin OriginImported

45" 4-speed first gear largest size 30 tooth. Fits:G 1947-1964W 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

45" 4-speed 3/4 shift clutch. Fits:W 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

45" 4-speed transmission main clutch gear. Fits:G 1947-1964WL 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

45" 4-speed cluster gear. Fits:G 1947-1964WL 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Replica raw rear kickstand acts as a frame stand for removing the rear wheel for service.*NOTE: Requires a special mount bot kit, available separately. **NOTE: Not to be used for a ride off stand. ...

Sleeve for reinforcing spring fork rear leg features steel construction with a raw finish.Must be brazed in place. Fits:W 1936-1948EL 1936-1948Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages780

Inner primary mount tab set is made of raw steel. For upper and lower mounts, the same for top and bottom.Sold as a set of 2. Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

Knucklehead rocker tin set is manufactured with the correct thickness and form for fit and features a parkerized finish.Sold as a 4 piece set. Fits:EL 1936-1947FL 1941-1947Additional Information UOM1 - SET FinishParkerized ManufacturerV-Twin ...

45 WL kickstand spring kit includes a black spring, bushing, and a parkerized tab.The spring is correct for the top of the kickstand. The tab will provide the correct spring tension. Fits:WL 1930-1952Additional Information UOM1 - KIT ManufacturerV-Twin...

Replica clutch plate set includes 1 clutch hub friction disc, 1 fiber outer friction disc, 2 lined clutch friction discs, 2 steel drive discs and 1 spring steel drive disc.Accurate OEM replica, exact and ready to install! This clutch set fits the 1936-40...

Seat spring stud set with 3/8" thread features a parkerized finish.Sold as a set of 4. Fits:EL 1936-1940VL 1930-1936U 1936-1948Additional Information OEM No.13330-36A UOM1 - SET MeasurementsAdditional InformationLength: 2.19" ManufacturerV-Twin ...

Side car front upper clamp kit for clamping to front frame tubes on 1936-99 models features a black oxide finish.*NOTE: Some Components may be "NOS. New Old Stock" with some scratches and discoloration. Please finish to suit restoration or application...

VL clutch plate 5 piece kit includes 3 external tooth lined plate and 2 steel driver plates.This is a 5 plate set. Fits:VL 1930-1936Additional Information OEM No.2481-30 UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages819 Tech...

Inner primary bracket for EL and FL, upper and lower applications for specific models. Features a raw finish.Must be riveted on. Fits:EL 1936-1952 LowerEL 1936-1952 UpperFL 1941-1958 LowerFL 1941-1957 UpperAdditional Information UOM1 - EA ...

45 transmission case assembly kit includes a transmission gasket kit, sprocket stud, top and side cover screw kit and an 45" W/G transmission case.Assembled in our New York V- Twin Motor Shop. Fits:RL 1930-1936W 1937-1952Additional Information UOM1 -...

V-Twin - 49-1041 - WL Transmission Shifter Drum Description WL transmission shifter drum for use with 45" 3 speed shifter gear. Fits: WL 1941-1946 Additional Information OEM No. 34012-41 UOM 1 -...

Shifter drum is rolled and formed as original and allows 1947-up forward shift patterns on 45 transmissions.This is the 1947 version that allows 1 back and 3 forward shifting closest to the driver, starts 1, N, 2, 3. ...

45 rear cylinder head only. Fits:G 1941-1973WL 1941-1952Additional Information OEM No.379-403R UOM1 - EA ManufacturerV-Twin OriginImported

WR Hillclimber Spring Fork handlebar, with 1" bars for external grips, features a raw finish with the short design for inline Spring Forks.1" handlebar ends accept 1" snap throttle and 1" grips, snap twist grips and 1-1/8" and 1" grip sets. The fork...

WR Hillclimber Spring Fork handlebar, with 1" bars for external grips, features a chrome finish with the short design for inline Spring Forks.1" bar ends accept 1" snap throttle and 1" grips, snap twist grips and 1-1/8" and 1" grip sets. *NOTE: Accepts...

WL rear support rod features a parkerized finish and inlcudes the nut. Fits:G 1936-1973W 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages808

45" shifter gear constructed from raw steel is the early type, marked with "3" and "R".For 3 forward, or 3 forward and reverse transmissions. *NOTE: Order shifter gear lever separately. Fits:W 1941-1946Additional Information OEM No...

Shifter gear lever is for use with forward type shift drum.For use when the lever moves forward to shift up. ...

Spring fork handlebar forging is inline triple trees completely machined in raw finish.Use for Hellings and Stellings riser installation or for handlebar fabrication or repair. This is a raw forging, accepting 1" bars which must be welded in place. Trecs...

Shifter drum is rolled and formed as original and allows 1947-up forward shift patterns on 45 transmissions.This is the 1947 version that allows 1 back and 3 forward shifting closest to the driver, starts 1, N, 2, 3. Stock length is not .010" shorter ...

Spring Fork handlebar forging is for offset triple trees completely machined in raw finish.Use for Hellings and Stellings riser intstallation or for handlebar fabrication or repair. This is a raw forging, accepting 1" bars which must be welded in place...

Front Spring Fork leg features a chrome finish.Original cast numbers in forged top. Holes are 1/2" in leg. *NOTE: For 45" models use bushings to adapt. Fits:W 1936-1937EL 1936-1937Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

WR Hillclimber Spring Fork handlebar features a chrome finish with the short design for inline Spring Forks.*NOTE: Accepts Stellings short stock handlebar spirals, available separately. ...

Cylinder head set features special 69cc combustion chamber and accepts 18mm spark plugs and head bolts.Heads are for use on stock 45 cylinders, not the WR angled type. *NOTE: Must order head bolts and washers separately. *NOTE: The castings numbers are...

Front Spring Fork leg features a black finish.Original cast numbers in forged top. Holes are 1/2" in leg. *NOTE: For 45" models use bushings to adapt. Fits:W 1936-1937EL 1936-1937Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025...

Breather spring kit includes a brass plate, spring and two pins. Fits:G 1937-1973U 1937-1948W 1937-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages798

Front brake backing plate to be used with early style cable adjuster.Bushing installed, may need fitting before assembly, note grease fitting position. Fits:UL 1938-1940EL 1938-1940Additional Information OEM No.4108-36 UOM1 - EA ManufacturerV-Twin ...