CV 3 bolt linkert adapter. Fits:WL 1941-1952Indian 1935-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages713

High speed carburetor needle valve with large head. Fits:FL 1940-1950Additional Information OEM No.1254-40 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages708

Replica brass Linkert carburetor choke shaft has cam installed. Fits linkert carburetor M-18, M-41, M-42, M-51, M-52, M-54 and M-88. Shaft features 6/32 thread and includes 6/32 x 1/4 fillister head screws.Hole for choke lever screw may have to be...

Sifton chrome petcock rear facing with 3/8" National Pipe Thread. Features solid brass construction with on/off and reserve positions, screen, and a 3/8" fitting. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information UOM1 - EA ...

Black petcock with right outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog...

Replica Linkert carburetor overhaul kit with 1 1/2" throttle shaft, float bowl nut, and float lever. Fits:WL 1933-1952UL 1937-1948FL 1941-1965EL 1936-1940VL 1933-1936Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog...

Kit has a black nitrophyl float and a steel needle.Threads on this needle and seat assembly is 7/16 x 27. *NOTE: For the float arm installation, the center prong of the float arm should have .003" of clearance, in order for the arm and...

Linkert carburetor bowl lock nut has a chrome finish. The nuts are 3/4 X 20 thread. Fits:FL 1941-1984Additional Information OEM No.27375-29 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708

Black Petcock with straight outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025...

Alloy finish Linkert carburetor float bowl.Float bowl does not have drain screw hole provision. Fits:FL 1941-1965EL 1936-1940Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708

Replica needle and seat set is constructed of a brass seat and a fitted stainless steel needle with a 7/16-24 thread. Fits:FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Includes black nitryl float viton tip, needle/seat, float arm, and pivot cap set for lever.*NOTE: For the float arm installation, the center prong of the float arm should have .003" of clearance, in order for the arm and needle to move freely. Fits:FL...

Plug screw is for Linkert carburetor idle fuel passage, constructed of stainless steel. Fits:FL 1941-1965Additional Information OEM No.27327-24 UOM5 - PK ManufacturerV-Twin OriginImported 2025 Catalog Pages708

Replica Linkert carburetor cork float includes shoulder bolt and screw.This cork float manufactured to OEM specifications and helps maintain a proper level of fuel in the carburetors float bowl for optimum performance. ...

Replica brass Linkert carburetor choke shaft has cam installed. Fits linkert carburetor M-18, M-41, M-42, M-51, M-52, M-54 and M-88.Hole for choke lever screw may have to be enlarged for some applications. Choke shaft accept choke levers with build in...

Replica Linkert carburetor choke rod kit has a zinc finish. Kit includes original style bracket, lever, and rod. Fits:FL 1948-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages711 Replacement Items35-9138 -...

Converts your Linkert carburetor throttle conversion kit to use snap throttle.Bracket is zinc plated. Kit is for use with overhead valve models to use snap throttle. Fits:FL 1948-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported ...

Linkert carburetor overhaul kit has a black nitrophyl float and a Viton tipped needle. Kit includes brass shoulder screw and brass nut. Nitrophyl black "M" float.*NOTE: Must order float lever separately. Fits:WL 1933-1952UL 1937-1948FL 1941-1965EL...

Linkert carburetor throttle lever with arm is zicad plated.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Lever features two holes for cable block location. Fits:FL 1948-1965Additional Information OEM No.27260-49 UOM1 - EA ManufacturerV-Twin...

Linkert carburetor main nozzle is machined of solid brass for use with 1-1/2""Bombsight" venturi's.This has a longer venturi tube that must be to cut to correct length. Main nozzle holes must face intake manifold. Fits:FL 1941-1965Additional Information ...

Linkert carburetor air intake shaft stop Fits:FL 1941-1965Additional Information OEM No.27219-36 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708

Linkert carburetor throttle disc is 9-x style.For 1-1/2" Bore linkert carburetor. Stamped 9x with correct bevel. Fits:FL 1951-1965Additional Information OEM No.27280-51 UOM1 - EA MeasurementsAdditional InformationOuter Diameter: 40.6mm ...

Venturi is 1-5/16" and is for a M74B Linkert carburetor.The end with the screw hole is 1-9/16" and the other end is 1-5/8". Fits:FL 1941-1965Additional Information OEM No.27363-41 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708 ...

Alloy finish Linkert carburetor float bowl has flat top and provision for drain screw hole.Includes linkert carburetor float pivot pin with caps for float pivot arm. Order pivot arm separately. Needle valve seat opening is milled flat and sealed by...

Carburetor choke disc includes zinc plated spring and push release pin.For use on 1948-1965 Overhead Valve models using M-35T, 36, 45, 45A, 61, 74, and 74B carburetors. Fits:FL 1948-1965Additional Information OEM No.27225-48 UOM1 - EA ...

SV replica linkert carburetor float bowl accepts 9/16" - 20 thread plug.Inlcudes 9/16 x 20 hex plug, with washer for bowl extension. Float bowl does have drain screw hole provision. Float bowl cap is on left side with hand facing carburetor intake...

Linkert carburetor main nozzle.Clearance for this main nozzle may need to be adjusted for exact fit on some bodies. Main nozzle holes must face intake manifold. Fits:WL 1933-1952UL 1937-1948FL 1941-1965EL 1936-1940VL 1933-1934Additional Information OEM...

Carburetor main nozzle for 1940-1951 Overhead Valve models.Main nozzle holes must face intake manifold. Fits:EL 1940-1951FL 1941-1951Additional Information OEM No.27331-40 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708

High speed carburetor needle valve with small head. Fits:FL 1940-1950Additional Information OEM No.27297-40 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708

Linkert service and hardware kit includes a nitrophyl float, zinc plated steel screw kit, gaskets, stainless steel needle and a brass seat.Made of hi-strength nylon. Press in, with no reaming necessary. Fits:FL 1941-1965EL 1936-1952G 1936-1956W...

Nylon bushings for Linkert carburetor throttle.Linkert throttle shaft bushings are constructed of high-strength nylon for ease of installation. Nylon Material: R108-118, N6. Set of 2. Fits:WL 1933-1952UL 1937-1948FL 1941-1965EL 1936-1940VL...

Linkert carburetor high speed needle valve.Features a fixed jet and is for Army use. Fits:WLA 1940-1952Additional Information OEM No.27298-40 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708 Tech NoteSuggested to use with #35-0395...

Replica cadmium intake manifold clamp set features fillister head screws. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information OEM No.27063-57 UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages718 Replacement Items14-0519 -...

Replica cadmium intake manifold clamp set features fillister head screws. Fits:FL 1955-1964Additional Information OEM No.9991 UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages718

Stainlees steel power intake clamp set features a "floating bridge." Clamps close the gap under the "T" bolt for total 360  wrap around seal. This set has O-ring seals*NOTE: Includes USA made clamps. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional...

Polished stainless steel intake manifold clamp set features clamps constructed from a strong, light weight material that is very flexible and easy to install! Includes o-ring style seals.Clamp set is manufactured to meet OEM specifications for long...

Chrome petcock with right outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog...

Chrome Petcock with straight outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025...

Chrome petcock wing type includes screen and 2 handles, sliding control valve with reserve. Use with 5/16" fuel line. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information OEM No.62125-55B UOM1 - EA MeasurementsAdditional InformationThread...

Linkert carburetor bowl lock nut and drain is for use with all Linkert bowls. The nut and drain allows water to drain without removing the bowl.This special float bowl nut with a 1/4" allen drain screw, allows the draining of condensation and water that...