Chrome battery tray support carrier bracket Fits:XLH 1967-1978Additional Information OEM No.66480-67 UOM1 - EA FinishChrome ManufacturerV-Twin OriginImported 2025 Catalog Pages967

Zinc horn mount bracket Fits:FX 1971-1972FL 1971-1972XL 1965-1985Additional Information OEM No.69117-65 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages1167

Zinc plated air cleaner support bracket. Fits:FL 1971-1977FX 1971-1976Additional Information OEM No.29018-71A UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages702

Black ignition coil mount kit includes the outer strip. These stock style brackets mount to existing studs and include nuts, screws, and washers to mount coil.Order separately studs to mount bracket if needed, and screw nut kit to mount cover. Fits:FX...

Black finish electric starter block off plate is used when starter assembly is removed. Fits:XLH 1970-1978 Starter assembly is removedXLCH 1970-1978Additional Information OEM No.31460-70 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages963

Zinc horn mount bracket Fits:FXR 1982-1984 Early 1984Additional Information OEM No.69006-82 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages1167

Zinc upper horn and choke bracket Fits:XL 1972-1985Additional Information OEM No.69129-72A UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages1169

Black rubber ISO front engine mount. Fits:FXR 1982-1994FLT 1979-2008Additional Information OEM No.16207-79B UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages105

2 piece front lower motor mount plates features a chrome finish.Sold in a quantity of 2. Fits:XL 1952-1981Additional Information OEM No.16210-52A UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages946

Top motor mount 4-piece kit includes upper horn and choke bracket zinc, chrome upper front motor mount, and chrome cross bracket cylinder head. Fits:XL 1977-1981Additional Information OEM No.69129-72 UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

Top motor mount chrome 2 piece set for 1957-1976 XL Fits:XL 1957-1976Additional Information OEM No.16250-57 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages946

Top motor mount chrome accepts molded coil and is not equipped with a key switch hole. Fits:XLH 1957-1977XL 1957-1977Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages946

Top motor mount chrome accepts molded coil and is equipped with a key switch hole. Fits:XLH 1957-1977XL 1957-1977Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages946

Cast rear replacement is a two bolt style motor mount. Fits:XL 1967-1981Additional Information OEM No.16203-67 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages946

Heavy duty top motor mount chrome is a 2 piece and are constructed of 1/4" steel and mounts the motor to the frame. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Top engine mount mounts the coil.This engine mount does not have the hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Top engine mount mounts coil and has a hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Top engine mount replaces stock type and features choke mount and key switch. Fits:FX 1973-1980Additional Information OEM No.69018-73A UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages483

Top engine mount replaces stock type and features a chrome finish.Mount does include choke mount for lever assembly. Fits:FX 1971-1972FL 1967-1984Additional Information OEM No.16852-67 UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog...

Top engine mount chrome replaces stock type and features choke mount. Fits:FX 1977-1983Additional Information OEM No.69013-77A UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages483

Electric starter motor clamp with stainless steel finish. Fits:XLH 1967-1980Additional Information OEM No.31473-67 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages962

Chrome billet mount adapter bracket allows installation of narrower Fat Kid FLST style, front fenders on FLT-FLHT models with 16" front wheels.Sold in a quanity of 2. Fits:FLT 1980-1999Additional Information UOM1 - SET ManufacturerV-Twin ...

Spring mount for the rear features a black finish.For use on 1982-1994 FXR models, when using a police solo seat. Fits:FXR 1982-1994Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #47-0900 Police FLTP...

Seat T rear strap with radius corners features a raw finish. Fits:FL 1941-1980Additional Information UOM1 - EA ManufacturerV-Twin OriginImported StyleCustom 2025 Catalog Pages1250

Big Twin air cleaner mount bracket. Fits:FLH 1978-1978 Early 1978FL 1978-1978 Early 1978Additional Information OEM No.29018-78 UOM1 - EA ManufacturerV-Twin OriginImported

Front solo seat nose bracket feautures a flat black finish.Bracket mounts to frame casting in the hole behind the rear gas tank mount. *NOTE: On 1957-1978 XL models, the bracket fits over the 2 tabs on the seat nose. On 1979-1984 XL models, the bracket...

Rear exhaust bracket is the bolt on type for FXR models and features a black finish. Fits:FXR 1983-1994Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA

This servi-car clamp set is for large outer diameter mufflers, features a parkerized finish. Includes header clamp set and muffler hanger bracket kit. Fits:G 1950-1973Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog...

Parkerized plain head bolt gas tank mounting kit. Fits:FL 1973-1975FX 1971-1987Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

1-3/4" staggered dual pipe exhaust system includes 38" long tapered mufflers. This exhaust system is for 1979 Sporster without kick start only. Includes slider channels on the mufflers and hanger bracket for installation.One piece seamless design with...

Chrome left vertical heat shield has worm clamps included. Fits:FL 1965-1984Additional Information OEM No.65707-77 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages660

V-Twin - 30-3208 - FLT Shovelhead Exhaust HeaderutDescriptionChrome 40" Paughco drag pipes with slash cut ends include mounting hardware.**CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These...

Replica chrome muffler set includes four clamps. The muffler has an outside diameter of 3-1/4" and is 27-7/8" long. Set features non removable baffles.**CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled...

V-Twin - 30-3187 - 1967 Replica Turn Out Muffler SetDescription1967 Replica chrome turn out muffler set features a seamless body design. Muffler is the exact replacement for 1967-1969 FL models.Includes a baffle. Muffler has a 3-1/4" diameter with a...

Replica chrome fishtail muffler set features a seamless body design.Includes two mufflers and four clamps. Muffler fits over 1-3/4" inlet, single or dual applications. *NOTE: Baffles do not come out. ...

V-Twin - 30-3164 - 1-3/4 inch Rigid Shotgun Shovelhead Header SetDescriptionChrome rigid shotgun Shovelhead header set is for rigid frames, with a flat pipe to connect to the front header pipe.Sold as a 3 piece set. Order bracket separately. For use with...

Chrome goose style drag pipes have a diameter of 1-3/4" and a length of 34". Use with heat shields.Set includes channel mounts. *NOTE: Does not come with heat shields. **CAUTION: These exhaust products are not legal for sale or use in California on...

Chrome drag pipes features a 28" long front pipe and 38" long rear pipe, that will mount with stock brackets.Sold in a quantity of 2. On the front pipe the down part is 15" and the rear to the start of the channel is 9-1/8". On the rear pipe the down to...

Exhaust drag pipe set with formed heat shields come with 1-3/4" slash cut and is 38" long.Set of two. The customer may remove the front header clamp from the heat shield, to use (2) matching header clamps available separately. *NOTE: Must order t-bolts...

Raw 15-1/4" megaphone tip has a 1-7/8" inlet to fit over OE style cigar mufflers. This is the tip only featuring a round end.Baffles and clamps not included. Tip fits over 1-3/4" outer diameter straight pipes. Fits:FL 1958-1984Additional Information ...