Frame top engine mount is two halves with seat tee and rear tank mounts incorporated into the top mount.Weld in place for accurate restoration. ...

Passenger footboard set with swingarm mount kit includes streamline style mini footboards.A Wyatt Gatling patch is included in the kit. Installation will require re-installation of the original hardware. ...

Chrome swingarm mount kit includes right & left side chrome pivot caps, passenger footboard mounts and passenger footboard with rubber pads.Installation will require re-installation of the original hardware. Fits:FLT 1982-2006Additional Information UOM1...

Rigid hardtail frame raw steel rear section is 1957 style replica construction with components featuring the factory details of the period.The rear transmission mounts are 2" from the bottom cross beam to the top of the plate. May be used to repair...

Raw finish dropped swingarm features a raised up axle position, so this lowers the swingarm and chassis in relation to the axle. Axle slots are 3/4", for disc brake applications. Swingarm is for use with 4 speed models.Lowers bike 2" and lengthens wheel...

Replica rear hardtail frame section is duplicated from an original rigid frame of 1957. Left axle plates are forged steel as OE. Weld-on type. The axle slots are 7/8" on both sides.Full replica construction of the rear frame section includes forged rear...

Chrome finish dropped swingarm features a raised up axle position, so this lowers the swingarm and chassis in relation to the axle. Axle slots are 3/4", for disc brake applications.Lowers bike 1/2" and lengthens wheel base 1/2". Axle lowering plates take...

This raw steel full rear section hardtail for Sportsters includes the rear motor mount and 4 bolt plate mount with upper and lower tube set. Frame is used to replace the stock rear motor mount and seat tube.The rear motor mount 4-bolt plate is welded in...

Neck frame with hallmarks forged in place. Machined to accept neck lock tumbler.Milwaukee forged neck is accomplished in 4 stages: First the steel is fired as red hot ingot, next huge hammers compact and orient the grain structure into a rough shape of...

Lower frame gas tank mount set is without cross bracket. It includes the right and left tabs. Tabs are constructed of st eel and have a raw finish.May require finishing prior top installation and must be welded on. Fits:FL 1955-1984Additional Information...

This 5th Mount transmission frame repair tab is weld on style for stock frames. The tab is constructed of steel and has a raw finish.May require finishing prior to installing. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA ...

Rear pipe frame tab. Fits: FL 1958-1984 Additional Information UOM 1 - EA Manufacturer V-Twin Origin Imported Type Rigid 2025 Catalog Pages 639

Brake line tee tab. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA TypeRigid

Cable mount frame tab is for under tank. Fits:FL 1955-1972Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages639

Upper shock frame mounts are weld on style for stock frames.Sold as a set of two. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1 - SET ManufacturerV-Twin OriginImported TypeSwing Arm

Casting top seat mount is for frame seat post, frame back bone and frame upper seat rail yoke. Fits:FL 1958-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages638

Frame mount tab set for solo seats have weld on mount tabs. Use with T bar and pivot bolt to mount K and CH solos. Fits:XL 1957-1979Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA StyleStock 2025 Catalog Pages822 Tech NoteSuggested...

This weld on style coil mount frame block set repairs stock frames and has a 3/8"-24 UNF thread. Fits:FL 1956-1983FX 1971-1983Additional Information UOM1 - SET ManufacturerV-Twin OriginImported TypeRigid

Frame top engine mount is two halves with seat tee and rear tank mounts incorporated into the top mount. Weld in place for accurate restoration.*NOTE: Threaded for seat "T" bolt. Fits:FL 1953-1969Additional Information UOM1 - SET ManufacturerV-Twin ...

Rigid frame front oil tank mount casting to be welded on.Thread is 5/16 x 24 and the lip from the bottom to the top measures 1-1/4". For use with 1-1/2" bar. Fits:FL 1941-1984FX 1972-1984EL 1938-1940Additional Information UOM1 - EA ManufacturerV-Twin ...

Rear frame engine mount and front transmission mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages638

Neck frame forging has a 30  rake with key hole. Machined to accept neck lock tumbler.Forged neck is accomplished in 4 stages: First the steel is fired as red hot ingot, next huge hammers compact and orient the grain structure into a rough shape of the...

Neck frame casting fits XL models to be welded in place on 30  stock or custom frames. Has unmachined padlock boss. Accepts neck cup kit.Neck frame accepts stock bearing cups and trees. Fits:XL 1972-1978Additional Information UOM1 - EA ...

Rear tank frame mount tabs. Fits:FL 1941-1984EL 1936-1947U 1937-1948Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages729

New Old Stock" Frame gusset plate is for the left side on swingarm frames.New Old Stock from the 1980's, part has rust and oxidation! Fits:FL 1958-1968FLH 1958-1968Additional Information OEM No.47261-68 UOM1 - EA ManufacturerV-Twin OriginUSA ...

Weld on frame footpeg mount without thread.Mount can be welded to 1958-1977 swingarm frames to utilize the stock FXE mount and raise the peg position. Sold as a pair. Fits:FX 1971-1978FL 1958-1984Additional Information UOM1 - SET MeasurementsAdditional...

Mid control mount kit is used to mount to the two holes located in the lower frame brace. Kit features a black finish.Mount features holes on each side for the left and right foot brake peg mount. Fits:FLT 1982-2017Additional Information UOM1 - KIT ...

XL control mount set features a black finish. Control mounts for right (2 bolt plate) and left (3 bolt plate) to accept Big Twin forward controls.Set is used to mount 1941-1999 Big Twin forward mount shifter, brake or clutch pedal kits. Additional...

Kit mounts to adapt 1957-1985 Ironhead motors into 1986-2003 XL rigid frames.Ironhead motor installation kit includes front and rear mounts and hardware. Fits:XL 1957-2003Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Raw steel neck lock pin only. Fits:FL 1948-1968VL 1930-1936Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

45" front engine clutch cable mount features a raw finish and must be welded to the center tube. Fits:G 1941-1973W 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeLock Washer 2025 Catalog Pages815

Weld on hardtail assembly features a raw finish, forged cross bar and rear axle plates on original WL 45 solo's.Installation requires a qualified fabricator and welder. Must be welded on and the fabricator must construct pieces to connect to frame...

XL rear motor mount pad is the tall type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

XL rear motor mount pad is the short type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Replica rear hardtail frame section is duplicated from an original rigid frame. Weld-on type and does not have seat post bushing.The rear transmission mounts are 1-1/2" tall. This hardtail includes rear transmission mount, tool box bracket, fender cross...

FXR weld on top motor mount features a raw finish and is . for use on frame.Must be welded in place on FXRT and FLT models. Fits:FXR 1982-1990FLT 1980-1990Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

XL raw brake shaft tube for mechanical brakes. Kit includes machined 7.25" tube with brass bushing and shifter cross bushing set installed. Must be welded in place to frame.*NOTE: Locate tube using cross shaft and pedal location in place to get proper...

Steering lock assembly kit includes complete key assembly, key lock, two keys, spring, pin, plunger, frame plug, and neck casting piece for lock. Must be welded in place.Steering lock assembly kit includes complete key assembly to fit 1948-1970 Big Twin...

Beaded windshield is a fixed mount type which comes completely assembled.Includes beaded windshield top and an adjustable lower windshield to fit FL aluminum headlamp cowl assembly. The center bolt to the top of the windshield measures 14". Order...

Top beaded windshield measure 18" and is for use on fiberglass fairings only.Fits 1969-1984 FLH 4 speed and 1980-1985 FLT 5 speed models with Batwing fairings. Fits:FLT 1980-1985FLH 1969-1984Additional Information OEM No.58164-69 UOM1 - EA ...