Electric starter motor bracket has a black finish. Bracket acts as a starter and battery box mount. Fits:FXE 1974-1984 Hitachi starterAdditional Information OEM No.66225-73 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages699

Solo seat mount kit for swingarm frame Big Twins.*NOTE: Must order seat separately. Fits:FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported StyleStock 2025 Catalog Pages1241 Replacement Items42-0033 - Chrome 3" Seat...

Left side oil tank bracket features a zinc plated finish. Fits:FL 1965-1984FXE 1971-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA

Right side oil tank bracket features a zinc plated finish. Fits:FL 1965-1984FXE 1971-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with #40-0406 Oil Tank with Side FillSuggested to use with #40-1719 Oil...

Solo seat front mount features a black finish.Requires 4 rivets for installation. Fits:FL 1941-1985Additional Information OEM No.32090-25 UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #37-0498 Truss Head Rivets...

Black oil tank mount base plate to attached wrap around tank to frame post.Rear mount installation for swingarm frame oil tank mount bracket. For use with electric start kit and 4 speed models. ...

Auxiliary buddy spring seat kit includes chrome springs, collars with pins, under seat brackets and brackets for frame mounts with the cross rod.Kit fits 1965-1971 FL, but can also be fit to 1968-1984. Fits:FLH 1965-1968FL 1965-1968Additional Information...

Black rear exhaust bracket is for 1980-2003 XL models. Fits:XL 1980-2003Additional Information OEM No.6559-80D UOM1 - EA ManufacturerV-Twin OriginImported

FXR seat hinge and latch kit. Fits:FXR 1982-1994Additional Information OEM No.52235-82 UOM1 - KIT ManufacturerV-Twin OriginImported

Solo seat mount kit includes the nose bracket, springs, rear brackets and hardware. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported StyleStock Replacement Items31-1549 - Stainless Steel Solo Seat Nose...

Top starter mount brace for york electric starter kit and features a parkerized finish. Kit includes seat spring cross suport, seat bracket mount and long rear seat mount tab. For 4 speed models.For securing the starter motor drive engagement on the...

Starter motor support bracket for York electric starter kits to mount the 12 volt starter. Manufactured of cast iron and features a zinc plated finish. For 4 speed models.Bolts to the rear of the transmission plate with 4 holes. For use on York electric...

Servi-car front muffler clamp features a parkerized finish. Fits:G 1951-1973Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Front oil tank mount bracket. Fits:FL 1965-1985Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with #40-0640 Swingarm Oil Tank Raw.Suggested to use with #31-1777 Rear Oil Tank Mount Bracket.

Zinc top engine mount replaces stock type and features choke mount and key switch. Fits:FX 1973-1980Additional Information OEM No.69018-73A UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages483

FL type horn bracket features a zinc finish.*NOTE: Mounts FLH Delco horn under front headlamp cowl assembly, bracket bolts to top tree. Fits:FL 1965-1984Additional Information OEM No.69130-65 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog...

This kit includes the black "T" with 5/16" hole and rubber booted 6-1/2" single shock.Shock has external black spring. Fits:G 1936-1973W 1936-1952FL 1941-1980Additional Information UOM1 - KIT MeasurementsAdditional InformationShock Body Diameter:...

XL finned header clamp set is investment cast aluminum with a vibration finish on a shot peen natural surface.*NOTE: Tighten set with 5/16" allen screws that are provided, the front and rear are the same. Both clamps are the same on certain applications...

This kit includes the chrome "T" with 5/16" hole and rubber booted 4" single shock.Shock has external black spring. Pivot bore hole measures 5/16", center to center rear mount holes is 11" and center front mount hole to center rear mount hole is 9". ...

Mini solo seat shock kit includes 4" shocks and two 1" clamps and springs.For use on frames with a 1" cross member on the rear part of the frame. Shock has an alloy body and adjuster ring with a black three piece spring clamp. Peg mount clamp set...

Mini solo seat shock kit includes two 4" shocks, springs and frame clamps for 1" bars.For use on frames with a 1" cross member on the rear part of the frame. Shock has an alloy body and adjuster ring. Additonal hardware may be required for some...

Zinc top engine mount chrome replaces stock type and features choke mount. Fits:FX 1977-1983Additional Information OEM No.69013-77A UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages483

Stainless steel XL muffler clamp features an inner diameter of 1-7/8" and a reinforced clamp pad area. Clamp features reinforcing pad spot that is welded in place for extra clamping power!*NOTE: Bolts not included. Fits:XL 1962-1970Additional Information...

Black oil tank base plate for mounting rigid oil tank.For rigid frame tank oil compartment is in front of center post. This base fits around tube and connects to the 2 top rear motor mount bolts. Oil tank base plate has two square holes to hold 1/4"...

ISO front engine mount is constructed of polyurethane and heat treated material. Fits:FXR 1982-1994FXR 1982-1984FLT 1979-2007Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Black saddlebag supports are designed to fit the contour of the fender struts and protect your bags from brake caliper and swingarm. Supports are 2 bolt type. Fits:FX 1971-1984FXE 1971-1984Additional Information OEM No.90584-85 UOM1 - SET ...

Saddlebag mount bracket repair set includes 39mm thick right and left stainless bracket set.This is a repair bracket for stock brackets, used to reinforce #49-0791 or OEM bracket set to frame. Fits:FLT 1979-2013Additional Information UOM1 - SET ...

Zinc plated horn mount bracket for XLCH models. Fits:XLCH 1965-1985Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA

Black 2 bolt license plate bracket for fender mounting. Fits:FX 1971-1972GL 1955-1972XL 1955-1972Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages1140

Servi-car upper shock bracket set is for the top of the shock and features a parkerized finish. Fits:G 1951-1973Additional Information OEM No.85211-42 UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages816

XLCH exhaust mount kit includes clamps and frame support tube and accepts mufflers.Kit includes a chrome front pipe clamp, a stainless steel exhaust header clamp set, a chrome 1-7/8" heavy muffler body and end clamp set, and a black exhaust support tube...

Zinc plated front seat mount plate for solo seat mounting. Accepts seat nose bracket hinge assembly. Mounts with 5/16" bolts. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use...

Carburetor support bracket features a zinc plated finish.For Bendix an Keihin butterfly carburetors only, not for CV type. Fits:FL 1972-1984FLT 1985-1992XL 1972-1987Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

XL motor mount plate set is constructed of raw steel. Set includes right and left plate set used to incorporate mount ports to accept late model forward controls. Fits:XL 1957-1981Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

Ignition coil and switch bracket features a natural raw finish. Ignition coil and switch bracket mounts the coil and universal key switch in the one-piece bracket.*NOTE: Mount hardware not included. Fits:FL 1958-1984Additional Information UOM1 - EA ...

Black steel side mount tail lamp bracket for vertical mounting of license plate holder.Drill license plate holes as required. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use...

2-1/2" muffler body clamp set features a chrome finish. Fits:FX 1957-1976Additional Information OEM No.65279-57 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages942

Fender Trim Bumper Bracket has a Zinc finish. Fits:FLT 1980-1999FLH 1977-1984Additional Information OEM No.91090-77A UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages65

Seat post assembly for 45 features a chrome tee with a 5/16" inner diameter bearing.Seat tee accepts a 5/16 x 24 bolt for mounting, without a bushing for this application. Tee will accept police and early style solo seats as original. ...

Oil tank mount kit includes upper black and lower chrome bracket with mount hardware to mount "Lunch Box" oil tank on Sportsters.We recommend using V-Twin #42-1875, XLCH battery tray, to fit a 16 amp Harley Davidson battery for an FXE or 2004-up XL...