Kraus - SP-ISO-09 - Stocker Gauge Adapter - Fits 1999-2010 Harley-Davidson DynaDescriptionKraus's Stocker Gauge Adapter allows you to mount a OEM Harley gauge bezel straight to the Isolated Risers Top Plate. This will work for OEM Dyna, Sportster, and...

Kraus - UN-IN-80 - Adjustable HD Gauge Mount - Fits 1984-2024 Harley-Davidson DynaDescriptionAllows you to relocate and mount an OEM Harley gauge bezel straight to any Kraus Gauge Mounting System. Enables you to make fine-tune adjustments, pivoting your...

Kraus - SP-49T-01 - 49mm Sport Performance Triple Tree Set - Fits 2006-2026 Harley-Davidson DynaDescriptionKraus 49mm Triple Trees are the foundation of a strong, properly engineered front end. Kraus 49mm Triple Trees are engineered and designed to...

Kraus - UN-PB-01 - T-Rex Pull Back Plate - Dyna/FXR/Sportster - Fits 1984-2017 Harley-Davidson DynaDescriptionThe T-Rex Pull Back Plate mounts to the top of the triple tree and moves your bar mounts towards the rider 2.5". The T-Rex plate adds 1" of...

Kraus - SP-FK-01 - Dynamoto Fork Guards - Fits 1991-2023 Harley-Davidson DynaDescriptionWhen running stock fender mounts, these guards bolt onto the front of your Ohlins Dynamoto forks to help protect your inner fork tubes and seals from grime and damage...

Kraus - SP-RI-05 - Solid Riser Bushing and Bolt Set - Dyna/FXR/XL - Fits 1991-2017 Harley-Davidson DynaDescriptionReplace your squishy rubber handlebar/riser bushings and hardware with these solid aluminum bushings and high strength grade 5 bolts...

Kraus - SP-RI-04 - Solid Riser Bushing Set - Dyna/FXR/XL - Fits 1991-2017 Harley-Davidson DynaDescriptionThis Solid Riser Bushing Set eliminates rubber mounted handlebars. Use these solid bushings to gain more control over your front end. Kraus Isolated...

Kraus - SP-LT-01 - SP Bottom Headlight Mount - Fits 2006-2026 Harley-Davidson DynaDescriptionThe Kraus Moto bottom headlight mount is machined from solid aluminum billet for strength and will allow you to mount your OEM stock fitment Harley or...

Kraus - SP-BR-51 - Dyna Rear Radial Caliper Mount - Fits 2000-2017 Harley-Davidson DynaDescriptionThe Kraus Dyna Rear Radial Caliper Mount is machined out of billet aluminum and allows you to run a single 108mm radial caliper on the rear of your FXD/Dyna...

Fox - 890-27-017 - Grip ST Adjustable 49mm Fork Cartridge Kit +2" Raised Height - Fits 2006-2017 Harley-Davidson Dyna Street Bob, Fat Bob, Low Rider & Super GlideDescriptionFox's Grip ST is the top-shelf drop-in cartridge kit for the 49mm front end...

Fox - 890-27-016 - Grip ST Adjustable 49mm Fork Cartridge Kit - Fits 2006-2017 Harley-Davidson Dyna Street Bob, Fat Bob, Low Rider & Super Glide Description The Fox Grip ST is the top-shelf drop-in cartridge kit for the 49mm Dyna front end. Stock...

Saddlemen - Step-Up Seat For Harley DavidsonSaddlemen's Step-Up is the stepped two-up that put a built-in lumbar stop behind the rider: a scooped driver pocket, a tall step that keeps you planted when you roll on, and a real passenger section behind it...

Saddlemen - Pro Series SDC Performance Grip Seat For Harley DavidsonThe Pro Series SDC is Saddlemen's performance seat: a slim, locked-in driver pocket with a tall lumbar step and gripper panels, built for riders who actually use the throttle. Lattice...

Saddlemen - Profiler Seat For Harley DavidsonThe Profiler is Saddlemen's low, narrow solo-style seat with a short passenger pad: it drops you down and tucks the lines of the bike, with SaddleGel under the driver and a lumbar lip at the back. Smooth,...

LePera - Tailwhip Seat For Harley DavidsonLePera's Tailwhip is the stepped solo with the aggressive rear kick: low in the nose, scooped driver pocket, and a tall back that locks you in when you get on the gas. Standard position puts you where the stock...

LePera - Maverick Seat For Harley DavidsonThe Maverick is LePera's long-haul 2-up for Touring bikes: a deep driver bucket with a wide passenger section, available with LePera's built-in driver backrest or without. Daddy Long Legs moves the driver pocket...

LePera - Bare Bones Solo Seat For Harley DavidsonThe Bare Bones is exactly what it sounds like: LePera's lowest, slimmest solo, hugging the frame with no bulk. It drops you down and back for a planted, stripped look. Pair it with the matching Bare Bones...

LePera - Bare Bones Pillion Pad For Harley DavidsonPassenger pad that bolts on behind a LePera Bare Bones solo. Each pad is shaped for a specific Bare Bones seat, so the option lists the LePera seat number it pairs with; match it to the seat you have...

LePera - Cherokee Seat For Harley DavidsonThe Cherokee is LePera's low-profile 2-up with the classic stepped look: a narrow driver section that drops you down, a short rise to a real passenger pad, and clean lines that suit a bobber or a daily rider.Why...

LePera - Daytona Seat For Harley DavidsonLePera's Daytona line: the Sport is a low, narrow driver seat with a short passenger pad; the 2-Up is the full-length version. Classic LePera shape for Dyna, FXR, Softail and Sportster.Why riders pick itMolded...

Drag Specialties Predator Seat For Harley DavidsonThe original Predator: a low, narrow solo-style seat with a short passenger pad, molded to hug the tank and frame. It drops you lower than stock and keeps the lines of the bike clean. Smooth, mild stitch,...

Drag Specialties Predator III Seat For Harley DavidsonThe Predator III is Drag's sharpest take on the stepped solo-style seat: a scooped driver pocket with a tall rear kick that locks you in, narrow at the nose so you can get your feet down, with just...

Drag Specialties Predator 2-Up Seat For Harley DavidsonPredator profile up front, a full passenger seat out back. Standard is the classic low Predator 2-Up; Performance adds a taller driver support behind you; Forward Positioned shifts the driver pocket...

LA Choppers Complete Handlebar Cable, Brake Line & Wiring Kit For Ape HangersEverything in LA Choppers' standard kit plus cut-to-length wiring extensions for the handlebar switches, so one box covers the whole bar swap. Pick your rise range, finish...

LA Choppers Handlebar Cable & Brake Line Kit For Ape HangersLA Choppers' standard bar-swap kit: extended throttle and idle cables (a throttle-by-wire extension on TBW bikes), an extended clutch cable or hydraulic clutch line, and a DOT brake line,...

LA Choppers Extended Clutch Cable For Ape HangersExtended clutch cable (or hydraulic clutch line on the Touring models that use one) cut for the rise range you pick. Black vinyl, stainless braided or Midnight black braided housing. The 2021-up Touring...

LA Choppers Extended Brake Line For Ape HangersJust the brake line, cut for the rise range you pick. DOT-approved, with the right banjo fittings and routing for the bike you select. Use it when your cables already reach but the brake line is the one...

LA Choppers Extended Throttle & Idle Cables For Ape HangersExtended throttle and idle cables for cable-throttle Harleys, sold individually so you can replace just the one you need. Pick throttle or idle, the rise range, finish and bike...

Burly Handlebar Cable & Brake Line Kit For Jail Bars & T-BarsBurly's cable and brake line kit cut for jail bars and T-bars, which run shorter than apes of the same rise. Black vinyl throttle, idle and clutch cables, black braided stainless brake...

Burly Black Vinyl Handlebar Cable & Brake Line Kit For Ape HangersOne kit, every cable and line you need to swap to ape hangers: extended black vinyl throttle and idle cables, extended clutch cable, black braided stainless brake line (DOT approved),...

LePera Kickflip Seat for Harley-Davidson How to order: Your Bike — pick your model/year range from the list. Seat Position — Standard is the original Kickflip. Daddy Long Legs moves you about 2" back for taller riders. Up Front moves you...

V-Twin - One Piece Sissy Bar fits '06-'17 Dyna Models - Black (OEM #523000-46A) 21" sissy bar features the one piece bolt on design in a gloss black finish. Round sissy bar with the upper kick angle mimics the old school look of the 50-60's bobber...

V-Factor OE-Style Right Front Brake Caliper — Chrome, 2000-2007 Fits: 2000-2007 Harley-Davidson Big Twin and Sportster with the factory 4-piston front caliper. Replaces H-D 44023-00C (right front). A direct replacement for the factory 4-piston right...

V-Factor OE-Style Front Brake Caliper — Chrome Single Disc, 1984-1999 Fits: 1984-1999 Harley-Davidson single disc models (except Springer and FL 4-speed), with 11-1/2" brake discs. A reliable OE-style front caliper for single disc Evo-era Big Twins...

V-Factor Rear Brake Caliper — Chrome, Late 1987-1999 Big Twin Fits: Late 1987-1999 Harley-Davidson Big Twin. Replaces H-D 44050-87. A direct replacement for the factory Evo Big Twin rear caliper, with smoother flowing lines and a chrome finish. Piston...

Belt Drives GMA 4-Piston Front Brake Caliper Kit — Chrome, 2000-2014 Fits: 2000-2014 Harley-Davidson Big Twin and Sportster models (except Springer). Belt Drives Ltd.'s GMA 4-piston front caliper kit for Twin Cam and late Evo Sportster-era bikes. A clean...

Belt Drives GMA 4-Piston Front Brake Caliper Kit — Chrome, 1984-1999 Fits: 1984-1999 Harley-Davidson Big Twin and Sportster models (except Springer and FL 4-speed). A complete 4-piston front caliper kit from Belt Drives Ltd.'s GMA line — a real upgrade...

V-Factor Hydraulic Clutch Transmission End Cover — Ball Milled Chrome Fits: 1987-2006 Harley-Davidson Big Twin 5-speed transmissions (Softail, Touring, FXR, and 1991-2005 Dyna). Ditch the clutch cable. This V-Factor end cover from Mid-USA swaps the stock...

V-Factor Hydraulic Clutch Transmission End Cover — Smooth Chrome Fits: 1987-2006 Harley-Davidson Big Twin 5-speed transmissions (Softail, Touring, FXR, and 1991-2005 Dyna). Ditch the clutch cable. This V-Factor end cover from Mid-USA swaps the stock...

Kenda - 0306-0116 - K673 Kruz 130/70-18 63H Front TireFeatures:Revolutionary inflated tire shapes for improved straight-line stability and cornering performance3+2 casing design, front and rear, for improved handling and high-load carrying capacityTread...