WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with...

FXRP footboard control kit includes a brake pedal chrome footboard set zinc plated frame mount brackets and a heel-toe shifter lever. Fitment: FXR 1982-1994

FXR brake plunger kit is a three piece kit that includes a plunger rod end brake plunger end and hex nut in a zinc finish. Fitment: FXR 1987-1994

FXR inner shift washer and seal kit is for the 1/2 inch diameter inner shift shafts. Sold as a 6 piece kit. Fitment: FXR 1982-1984

FXR shifter shaft bushing includes 4 o-ring alloy type with two bronze bushings on each end. Sleeve is used to replace the stock plastic part. Fitment: FXR 1984-1994

FXR shifter rod assembly features a zinc finish and includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation. Fitment: FXR 1982-1994

Zinc plated FXR pedal rod end 4 piece kit includes the rod end zinc clevis pin zinc 5/16 inch x 24 thread nut and a cotter pin. *NOTE: Measures 2-3/8 inch from the hole to the end of the thread. Fitment: FXR 1982-1987

FXR driver footpeg set features zinc plated peg shafts and includes the rubber set and mount bolt set. Sold as a pair. Fitment: FXR 1982-1994 XL 1986-2004

2023 New Production black kickstand is stock length and includes pin for FXR models. Fitment: FXR 1982-1990

FXRP shifter rubber set for heel toe shifter levers features a black finish and is the slip on type. Sold as a pair. Fitment: FXRP 1985-1994

FXR frame side cover set is constructed of black ABS plastic with vented panels. Sold as a pair. Requires (4) 1/4 inch-20 x 1-3/4 inch allen bolts and (4) 1/4 inch flat washers. Tech Notes: Required to use with #37-0160 Allen Flat Head Scrws Chrome...

This replaces the original plastic unit on the 1982-up models. Thread is 3/8 inch x 28 TPI. Holes on the back measure starting with the small one closest to the bottom and working to up: #8-32* 5/16 inch- 24* top hole out of the 3 is not threaded but...

Pro-One - Steering Stem Bolt fits '99-'05 FXD & '88-'22 Sportster Models (Except RH Sportster) Features: Replaces stock steering stem hardware Note: Replacement for Pro-One Triple Tree...

James Gaskets - JGI-65834-68-A2 - Copper Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. Copper Exhaust Port Gasket from James Gaskets, the gasket outfit Harley builders have...

James Gaskets - 65834-68-SC2 - Steel Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. Steel Exhaust Port Gasket from James Gaskets, the gasket outfit Harley builders have...

James Gaskets - 65834-68-STD - 3 Bolt Standard Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. 3 Bolt Standard Exhaust Port Gasket from James Gaskets, the gasket outfit Harley...

James Gaskets - 65834-68-X-2 - Fire Ring Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. Fire Ring Exhaust Port Gasket from James Gaskets, the gasket outfit Harley builders...

James Gaskets - JGI-65834-98-X2 - Knitted Wire Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. Knitted Wire Exhaust Port Gasket from James Gaskets, the gasket outfit Harley...

James Gaskets - JGI-16776-63-X1 - .020" Front/Rear Metal Base Gasket with Outside Oilers - Fits '66-'84 Big Twin Models - Pair Fits: '66-'84 Big Twin Models. Full year/model list is on the Fitment tab. .020" Front/Rear Metal Base Gasket with Outside...

James Gaskets - JGI-16776-63-XF - .030" Foamet® Front/Rear Base Gasket - Fits '63-'84 Big Twin Models - Pair Fits: '63-'84 Big Twin Models. Full year/model list is on the Fitment tab. .030" Foamet® Front/Rear Base Gasket from James Gaskets, the gasket...

James Gaskets - JGI-18633-48-KF - Tappet Block Gasket - Fits '48-'99 Big Twin Models (.020” Foamet®) - Pair Fits: '48-'99 Big Twin Models (.020” Foamet®). Full year/model list is on the Fitment tab. Tappet Block Gasket from James Gaskets, the gasket...

James Gaskets - JGI-17041-92-A - Motor Gasket with Metal Base and Rocker Gaskets - Fits '92-'99 80” Evolution Model Fits: '92-'99 80” Evolution Model. Full year/model list is on the Fitment tab. Motor Gasket with Metal Base and Rocker Gaskets from James...

James Gaskets - JGI-17540-99-X - Silicone Rocker Cover Metal Gasket - Fits '66-'84 Shovelhead Model (.020”) - Pair Fits: '66-'84 Shovelhead Model (.020”). Full year/model list is on the Fitment tab. Silicone Rocker Cover Metal Gasket from James Gaskets,...

James Gaskets - JGI-45400-75 - Fork Seal - Fits 'L75-'E84 FX/​FXR Sportster Models Fits: 'L75-'E84 FX/​FXR Sportster Models. Full year/model list is on the Fitment tab. Fork Seal from James Gaskets, the gasket outfit Harley builders have trusted since...

James Gaskets - JGI-65781-82 - Crossover Exhaust Gasket - Fits '86-'03 Sportster Models - Pair Fits: '86-'03 Sportster Models. Full year/model list is on the Fitment tab. Crossover Exhaust Gasket from James Gaskets, the gasket outfit Harley builders have...

James Gaskets - JGI-17955-36-D - Push Rod Cover Cork Gasket - Fits '48-'E79 Big Twin Models - 10 Pack Fits: '48-'E79 Big Twin Models. Full year/model list is on the Fitment tab. Push Rod Cover Cork Gasket from James Gaskets, the gasket outfit Harley...

James Gaskets - JGI-16779-99-X - 1 Piece Lower Rocker Housing Gasket - Fits '86-'22 Sportster Models (Except RH Sportster - Pair Fits: '86-'22 Sportster Models (Except RH Sportster. Full year/model list is on the Fitment tab. 1 Piece Lower Rocker Housing...

James Gaskets - JGI-16777-94-S - 3.625" Big Bore Metal Base Gasket - Fits '84-'99 Evolution Big Twin Models - Pair Fits: '84-'99 Evolution Big Twin Models. Full year/model list is on the Fitment tab. 3.625" Big Bore Metal Base Gasket from James Gaskets,...

James Gasket - 5th Gear Clutch Side Mainshaft Seal fits '80-'E84 Big Twin 5-Speed Models (OEM #12044, 12044A) Features: Made in the U.S.A. Fitment 1984 Harley-Davidson Low Glide FXRS - Notes: 1984Fits to Early '84...

James Gasket - 35 mm Fork Seals fits 'L86-'87 Sportster Models (OEM #45387-83) Features: High-quality replacement components Available in dealer packs of ten (sold each) or in packs of two (sold as pairs) Made in the U.S.A...

James Gasket - 39 mm Fork Seals fits '99-'05 Dyna, 'L87-'22 Sportster Models (Except RH Sportster (OEM #45378-87)) Features: High-quality replacement components Available in dealer packs of ten (sold each) or in packs of two (sold as pairs) Made in...

James Gasket - Pushrod Seal Set fits '79-'81 Shovelhead Models (O-Ring) Features: Convenient and efficient way to sell the correct amount of seals or O-rings for a rebuild or cam change James complete kits are neatly packaged for easy display Made...

James Gaskets - JGI-12067-A - Main Drive Gear Seal - Fits '00-'06 Big Twin Models Fits: '00-'06 Big Twin Models. Full year/model list is on the Fitment tab. Main Drive Gear Seal from James Gaskets, the gasket outfit Harley builders have trusted since the...

James Gaskets - JGI-37741-67-A - Trans Double Lip Seal - Fits 'L79-'81 Big Twin 4-Speed Models Fits: 'L79-'81 Big Twin 4-Speed Models. Full year/model list is on the Fitment tab. Trans Double Lip Seal from James Gaskets, the gasket outfit Harley builders...

James Gaskets - JGI-16787-99 - .045" Head Gasket - Fits '99-'06 Twin Cam 95” Models Fits: '99-'06 Twin Cam 95” Models. Full year/model list is on the Fitment tab. .045" Head Gasket from James Gaskets, the gasket outfit Harley builders have trusted since...

James Gaskets - JGI-16787-99-X - .036" Head Gasket - Fits '99-'06 Twin Cam 95” Models Fits: '99-'06 Twin Cam 95” Models. Full year/model list is on the Fitment tab. .036" Head Gasket from James Gaskets, the gasket outfit Harley builders have trusted...

James Gaskets - JGI-16777-96-X - 4.000" S&S Cylinders Front/Rear Metal Base Gasket - Fits '84-'99 Evolution Models - Pair Fits: '84-'99 Evolution Models. Full year/model list is on the Fitment tab. 4.000" S&S Cylinders Front/Rear Metal Base Gasket from...

James Gaskets - JGI-18635-99-F - Tappet Cover Gasket - Fits '99-'17 Twin Cam Models - Pair Fits: '99-'17 Twin Cam Models. Full year/model list is on the Fitment tab. Tappet Cover Gasket from James Gaskets, the gasket outfit Harley builders have trusted...

James Gasket - Cam Cover Gasket fits '93-'99 Evolution Models (Metal w/ Silicone (OEM #25225-93)) Features: Replacement gaskets for cam chests Made in the USA Fitment 1999 Harley-Davidson FXR 3 - - 1999 Harley-Davidson FXR...

James Gasket - Cam Quick Change Gasket Kit fits '93-'99 Evolution Big Twin Models Features: Kit includes all necessary gaskets, seals, O-rings and cork washers for doing a cam change Fitment 2000 Harley-Davidson FXR...