Foot clutch friction disc cover with gloss black finish.Restoration quality foot clutch cover is exact replica for 1936 E and 1937-1938 EL and UL models. Cover mounts with single screw only, top is secured by fitting over the spring stud. There is an...

Rebuilding your old Spring Forks? V-TWIN MFG. Has the parts you'll need. We are your restoration specialists. This kit includes two acorn nuts & two zinc spring retainer nuts . Fits:UL 1937-1948G 1936-1957WL 1936-1952EL 1936-1948FL 1941-1948Additional...

Linkert air cleaner four bolt vortex fits on top of J-slot air cleaner backing plate.Requires the use of 12-24 x 1/2" phillister screws. Fits:FL 1941-1965WL 1941-1952UL 1941-1948Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025...

Rear stock wide brake cam is for 45" solo model with wide brake shoes.Updated version is for complete contact with the brake shoe set. Fits:WL 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages794

Solid steel VL jiffy kickstand leg features a parkerized finish and includes spring plate and spring.VL tab is shorter than 45 W style. *NOTE: Must order top tab and spring separately. Fits:VL 1930-1936Additional Information UOM1 - EA ...

Scavenger oil pump assembly with the welch plug installed, features a parkerized finish.All internals are included. ...

Spring Fork front brake shackle bar kit includes a chrome shackle bar with zinc hardware. Fits:G 1941-1957FL 1941-1949U 1941-1948EL 1941-1949Additional Information UOM1 - KIT MeasurementsAdditional InformationCenter to Center: 6-1/4" FinishChrome...

This instruction tag for 6" air cleaner covers is black on brass relief and includes two rivets. Fits:EL 1936-1940UL 1936-1940Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages704

45 WL sprocket cover features an aluminum finish and is the narrow type.Cover accepts narrow clutch arm. Bare sprocket cover only, does not include arm and hardware. The width at the pivot point on the cast sprocket cover is 48mm. Fits:W...

Rear outer brake backing plate kit is for 45" WL models features a black finish.Check speedometer drive fit before final assembly. Order cam, pivot stud, pivot plate, arm, speedometer drive, brake shoes and springs separately. Fits:WL 1941-1952Additional...

Alemite early style frame grease fittings feature a white zinc finish have 67.5  angle as original, without ball seal at the end, for 1936-1938 restoration. Fits:EL 1936-1938UL 1936-1938WL 1936-1940Additional Information UOM10 - PK ManufacturerV-Twin ...

Alemite early style frame grease fittings feature a white zinc finish, and are straight without ball seal at the end. Fits:EL 1936-1938UL 1936-1938WL 1936-1940Additional Information UOM10 - PK ManufacturerV-Twin OriginImported TypeSwing Arm 2025...

Alemite frame grease fitting features a raw finish and are early style, straight without ball seal at the end. Fits:WL 1938-1940EL 1936-1938UL 1936-1938Additional Information OEM No.0344 UOM1 - EA ManufacturerV-Twin OriginImported TypeSwing Arm ...

Spring Fork front brake shackle bar kit includes black shackle bar and zinc plated hardware.Includes extra steel bushing for shackle. Fits:UL 1941-1948G 1941-1957FL 1941-1948EL 1941-1948Additional Information UOM1 - KIT FinishBlack LocationFront ...

Spark plug holder is for original style battery tops with a center rib. Holder is cast and holds two 18mm spark plugs. Original "Atlas Products" item, faithfully re-created by V-Twin MFG. Made by the forged aluminum process.Fits 18mm spark plugs. Fits:FL...

Side valve rear kickstand has chrome finish. Order mount bolts separately. Fits:VL 1930-1936Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages819

Chrome 45 front wheel hub cover. Fits:W 1936-1952Additional Information UOM1 - EA FinishChrome ManufacturerV-Twin OriginImported 2025 Catalog Pages794

Parkerized 45 front wheel hub cover.Box could be used for first aid or tools. *NOTE: May be scratches or dings in the black surface. Fits:W 1936-1952Additional Information OEM No.44342-29 UOM1 - EA FinishParkerized ManufacturerV-Twin OriginImported ...

Fork neck spacer features a raw finish and is made to fit Flander's top tree.Spacer measures 1" tall and features an inner diameter of 1-1/8". Fits:VL 1930-1936Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Black Spring Fork handlebar assembly is inline type and includes a horn button, dimmer switch and all push type throttle-spark cables and spirals.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight,...

V-Twin - 49-0613 - 1936 Rear Brake Backing Plate Assembly Kit Description 1936 rear brake backing plate kit assembly. Fits: EL 1936-1936 Additional Information UOM 1 -...

Spring Fork rod cross bar features original 1930's design and is detailed cast to fit under two acorn Spring Fork rod top nuts.Spring fork rod brace will fit custom and original spring fork rods. Cross bar is nickel plated steel. Fits: G 1936-1957 FL...

Rear frame stand has a chrome finish, and an exact shape and style as UL and EL models. It acts as a frame stand for removing the rear wheel for service.This stand is an exact replica of the 1936-37 tubular style rear stands! Restoration quality! Order...

Black front brake backing plate for stock replacement*NOTE : The bronze bushing is honed to size, 22.21mm inner diameter. Fits:WL 1941-1952Additional Information OEM No.44145-41 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages794

Steel damper disc with tab features a cadmium finish and is for use on side valve models. Fits:W 1941-1952EL 1936-1948FL 1941-1948Additional Information OEM No.46717-30 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages782

Clutch plate screw set. Fits:VL 1930-1936Additional Information UOM6 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages819

Rear frame stand has a black finish, and an exact shape and style as UL and EL models. It acts as a frame stand for removing the rear wheel.This stand is an exact replica of the 1936-37 tubular style rear stands! Restoration quality! Order stand catch...

Side valve rear kickstand is iron and riveted construction and features a black finish. Order mount bolts separately.Kickstand mounts to the outside of the frame. The tubular design is exact for 1936 VL models but a retrofit for 1930-1935 VL models...

Plastic front fender lamp lens. Fits:UL 1937-1948EL 1936-1940FL 1941-1948Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages1166

Replica black inner primary cover must be cutout for use on electric start models 1964-1973. Fits:WL 1941-1952G 1941-1963Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages814 Tech NoteRequires the use of #10-8549...

Chrome short style acorn nuts for use on the top of the spring rods. Fits:UL 1937-1948G 1936-1957WL 1936-1952EL 1936-1948FL 1941-1948Additional Information OEM No.45648-36 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages784

6 piece Spring Fork rocker stud lock set. Fits:UL 1946-1948FL 1946-1948Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages783

Upper spring rod nut for use on the top of the spring rods. Fits:UL 1937-1948G 1936-1957WL 1936-1952EL 1936-1948FL 1941-1948Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages784

V-Twin - 49-0555 - 1936 EL Rear Brake Assembly Description 1936 EL Rear brake assembly includes black brake drum, black backing plate, rear brake cam, brake lever, brake shoe set, brake shoe springs and pivot stud.The 1936 only rear brake on 61 EL...

Spring Fork front rocker stud set includes hex cap covers. Set of 4 for both rockers.Suggested to use when a fender is not going to be installed. Fits:UL 1936-1948EL 1936-1940G 1941-1957FL 1941-1948Additional Information UOM1 - SET ManufacturerV-Twin ...

45" front hub washer kit includes 2 copper shims, 2 studs, and 1 steel shim. Fits:W 1941-1952Additional Information OEM No.44348-29 UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages794

Front axle kit for 45 features a black front axle with parkerized hardware.NOTE: Axle is 3/8" in diameter, bare steel. Fits:G 1936-1940W 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages794

V-Twin - 49-0538 - 1936 Style Spring Fork Steering Damper Lever Description Spring Frok steering damper handle with steel construction features a chrome finish. Features a unique shape as original for 1936 EL models.Can be fit to later models for a...

45 brake backing plate kit is for the front and the backing plate features a gloss black finish.Bearing thrust cover assembly not included. Fits:W 1940-1952Additional Information UOM1 - KIT FinishBlack LocationFront ManufacturerV-Twin OriginImported...

Kit features zinc plated U clamp with chrome acorn nuts for use with the front engine bar bolt cover. Fits:FL 1955-1957EL 1936-1940FL 1941-1947Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages622