Cadmium plated linkert carburetor needle valve lever kit includes arm with detent ball installed, collar, spring and shoulder screw.Lever has one fixed ball to contact choke cam, and one spring loaded ball for adjuster screw. Kit includes lever, washer,...

High speed needle valve for M-18 1" linkert carburetor. Fits:W 1936-1952Additional Information OEM No.27297-30 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages708

Linkert carburetor oversize bowl drain and float pivot pin cap screw with washers.6ead diameter is the same as a standard size plug. Standard size screw is 1/4"-32 threads, repair screw is 5/16"-24 thread. Simple fix for stripped out drain screws or...

Flathead cast iron intake manifold with brass packing rings and cadmium plated nuts. This manifold is the shorter version 1938 style.Manifold is not recessed, it is machined on to the gasket surface. Requires use of spacer and/or insulator block to add...

1-1/2" linkert carburetor rebuild kit includes hardware and all necessary parts to fit linkert carburetors.Kit includes the overhaul kit, throttle shaft and its corresponding disc. Additional installation hardware includes: screws, bushings, throttle...

1" linkert carburetor rebuild kit includes hardware and all necessary parts to fit linkert carburetors.Kit includes the overhaul kit, throttle shaft and its corresponding disc. Additional installation hardware includes: screws, bushings, throttle shaft...

1-1/4" linkert carburetor rebuild kit includes hardware and all necessary parts to fit Linkert carburetors.Kit includes the overhaul kit, throttle shaft and its corresponding disc. Additional installation hardware includes: screws, bushings, throttle...

Linkert bracket cable sleeve has a 1/4" x 28 thread and is zinc plated. Screw is used to screw into snap throttle bracket. Fits:FL 1941-1965U 1937-1948Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

OHV Linkert snap throttle kit includes bracket that mounts to the top two screws on the Linkert 4 bolt OHV carburetor. Fits:FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

M74 Linkert carburetor upgrade kit features a cadmium finish and is used for detailed restoration. Fits:FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement Items9662-1 - Fuel Filter Strainer Kit Cadmium8902-4 -...

Linkert fixed jet #17. Fits:FL 1933-1965Additional Information OEM No.27317-50 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages707

2023 New Production Linkert carburetor choke lever has the ball detent cam included. Choke lever is zicad plated.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Fits:WLA 1941-1945W 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin ...

M74 linkert bombsight 3 piece kit includes a bombsight brass venturi, nozzle and #19 jet. Fits:EL 1941-1953FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages708 Replacement Items35-9125 - Linkert...

M74 linkert bombsight 3 piece kit includes a bombsight alloy venturi, nozzle and #19 jet. Fits:EL 1941-1953FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages708 Replacement Items35-9125 - Linkert...

Linkert carburetor cable block end. Fits:UL 1937-1948FL 1941-1965WL 1941-1952EL 1936-1940Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Linkert throttle lever arm.For use in linkert snap throttle. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #35-1762, Prism Linkert Snap Throttle KitSuggested to use with #35-1787...

Linkert cable bracket is for use with snap throttle kit.For use with threaded cable ferrule to accept universal cable. Fits:FL 1941-1965U 1937-1948EL 1936-1948Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA Tech NoteRecommended to use...

Snap throttle kit for Overhead Vavle M-74 model linkerts.Kit includes the cable, sleeve and bracket for the face of the carburetor. Fits:UL 1937-1948FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages711...

2021 New Production replica linkert carburetor float lever. Updated production gives a lighter profile, which makes it easier to make float setting adjustments.. Fits:FL 1941-1965EL 1936-1952W 1936-1952Additional Information OEM No.27381-50 UOM1 - EA ...

Side Valve snap throttle arm is stainless steel. Fits:UL 1937-1948G 1937-1956W 1937-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Petcock shut off petcock features a stainless steel finish and is for fuel valve rod and knob installations.Must order knob kit separately. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Linkert M-74 carburetor assembly includes a black carburetor body with cadmium components. Fits:FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Brass seal set for linkert intake manifolds. Fits:WR 1941-1952Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

WR manifold kit includes manifold, brass seals, adapter inserts and hex nuts. Fits:WR 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement Items35-0286 - WR Linkert Intake Manifold35-1707 - Intake Manifold...

1-1/4" Linkert carburetor throttle shaft is the extended type.For use with 1-1/4" snap throttle shaft kits. Requires spring for opreration. Fits:UL 1937-1948W 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech...

Linkert 1-1/2" carburetor throttle disc is standard size with #13 markings and the correct bevel. Throttle disc is for M74 Linkert carburetors. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages710

Replica sv stock float bowl is with a cast finish and without drain hole. Fits:U 1937-1948W 1937-1952G 1937-1954Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages710

Overhead Valve bean pot linkert bowl is made from aluminum and features a drain hole. Fits:FL 1941-1965EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages710

Linkert Carburetor float bare bowl is cast finish. Includes brass drain plug. Accepts brass cap.*NOTE: Brass cap NOT included. Fits:U 1937-1948W 1937-1952G 1937-1954Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog...

Nickel plated M-5 carburetor body is milled to accept an overhead valve float bowl. Fits:EL 1936-1939Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Replacement Items35-1452 - OHV Linkert Float Bowl Kit

Linkert carburetor main nozzle. Fits:FL 1938-1958Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages708

Linkert Side Valve float bowl assembly includes a linkert carburetor float bowl assembly, replica linkert carburetor float lever, linkert nitrophyl carburetor float, linkert carburetor float assembly and the float lever screw kit.Assembled by the Motor...

Linkert M-74 carburetor assembly includes installed "snap throttle" shaft. Shaft accepts OE stock snap throttle arrangement.Carburetor is the same as the ones supplied in our 74 Knucklehead engines. See them run! Fits:FL 1941-1965Additional Information ...

1" linkert peak seal set for Servi-cars with 1" bore linkert carburetors. Fits:G 1937-1957Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

Sifton peak seal set for linkert manifolds, to replace stock brass sealing rings. The ultimate seal for peak performance.Sold as a pair. Fits:W 1936-1952Additional Information UOM1 - SET MeasurementsAdditional InformationInner Diameter: 1...

Linkert carburetor bowl kit features a bowl with a "bean pot" style with a built in drain screw. This bowl is fitted with a hex cap, nitrophyl float, and float arm. Includes carburetor overhaul kit.Kit includes assembled needle and seat, gaskets and...

Linkert snap throttle kit features a unique design revamped by Dan Henke and Rob Taylor from our Motor Shop. Kit is for use with M-74 carburetors. Includes shaft, throttle arm, cable end, shaft spring and cable bracket.Features a longer throttle shaft...

Linkert snap throttle shaft for linkert 1-1/2" carburetors (M-74).*NOTE: The shaft is longer to accommodate lower spring installation. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with...

Linkert snap throttle return spring.For use in linkert snap throttle. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #35-1713 Linkert Snap Throttle Kit.Suggested to use with #35-1787...

For 45 WL and G models. Kit includes a 38mm flat side TC carburetor with a choke mechanism, cable, 3 bolt flange adapter and a twist grip set.Carburetor is OKO brand. Must order the cast iron manifold separately. In order to mount an air cleaner to the...