M74 Linkert carburetor main nozzle is an OE replica that mesures 2" long. Fits:EL 1937-1952UL 1937-1948FL 1941-1965ULH 1938-1941U 1937-1948FLH 1955-1965Additional Information OEM No.27332-50 UOM1 - EA MeasurementsAdditional InformationLength: 2" ...

Linkert carburetor small parts kit includes components for all 1", 1-1/4" and 1-1/2" model brass linkerts. Fits:W 1936-1956FL 1941-1965G 1936-1956Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages708 Replacement...

Linkert 1-1/2" carburetor throttle disc is .010" oversize with correct bevel. Fits:FL 1952-1952 61" Overhead ValveFL 1940-1950Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Linkert carburetor float bowl with early style hex cap features a natural aluminum finish and is the bean pot style with additional capacity. For Flathead models.*NOTE: Float bowl with drain screw includes installed stainless steel needle with matching...

Overhead valve linkert carburetor float bowl features a brass construction, with a flat top and provision for drain screw hole.Includes linkert carburetor float pivot pin with caps for float pivot arm. Order pivot arm separately. Needle valve seat...

Linkert-CV carburetor adapter is machined from aluminum and adapts CV carburetors to 3 bolt linkert manifolds on Side Valve Harley's and Indians.Includes the following; 27397-27, carburetor needle valve lever screw, 27349-27, low speed needle spring,...

Linkert needle valve lever features a brass finish with the detent ball installed.Order related parts or kit separately. Fits:FL 1941-1965U 1937-1948W 1937-1952EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025...

Replica linkert carburetor float bowl features a brass construction for Side Valve models.Inlcudes 9/16 x 20 hex plug, with washer for bowl extension. Float bowl does have drain screw hole provision. Float bowl cap is on the left side with hand facing...

2023 New Production linkert carburetor air intake shaft stop.*NOTE: Flat on one side. Fits:FL 1941-1965Additional Information OEM No.27219-36 UOM1 - EA ManufacturerV-Twin OriginImported

2023 New Production brass linkert needle valve lever kit includes the shoulder bolt, spring, spring seat collar and arm.This is a 4 piece kit. *NOTE: Needle not included. Fits:FL 1941-1965U 1937-1948W 1937-1952EL 1936-1952Additional Information OEM No...

Linkert carburetor main nozzle. Fits:EL 1936-1939Additional Information OEM No.1258-36 UOM1 - EA ManufacturerV-Twin OriginUSA

Linkert carburetor overhaul and screw kit features a black nitrophyl float, steel needle and zinc plated screws and washers for choke and throttle doors, as well as air cleaner back plates. Fits:FL 1941-1965EL 1936-1940Additional Information UOM1 - KIT ...

Overhead Valve linkert float bowl kit. Fits:EL 1936-1939FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement Items35-1872 - Replica Linkert Carburetor Float Lever35-0490 - OHV Linkert Carburetor Float Bowl with...

Linkert 1" throttle disc is #12 type, to fit 1" Linkert carburetors. Fits:G 1936-1956Additional Information OEM No.27280-34 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages708

Linkert carburetor atomizer with screen. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages706

Bombsight Venturi fits 1-1/4" for the Linkert Carburetors.*NOTE: "Bombsight" type venturi's may require a shorter main nozzle. Fits:W 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages710

Linkert thumb choke lever includes detent ball and spring. Fits:W 1933-1952EL 1936-1952VL 1930-1936Additional Information OEM No.1233-33 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages711

Gasket kit for 3-bolt Linkert carburetors. Fits:W 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages709

Linkert carburetor choke disc with large hole is for 1-1/2" and 1-1/4" bore linkerts, constructed of stainless steel.Large hole in bottom portion is 3/8" in diameter. ...

WR intake manifold kit includes intake manifold, nuts, brass seals and a Tedd Cycle patch. Manifold allows use of larger carburetor for increased air flow.This kit is designed for WR model 45" motors. Nuts included in kit are clearance to fit with the WR...

Nickel plated Overhead Valve linkert carburetor throttle lever. Lever is shown on M-5 linkert carburetor. Fits:EL 1936-1939Additional Information OEM No.1238-36 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages708

Cadmium plated linkert carburetor throttle lever. Fits:W 1935-1948U 1937-1948Additional Information OEM No.1238-37C UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages708

Nickel plated linkert carburetor throttle lever. Fits:VL 1933-1936W 1934-1936Additional Information OEM No.1238-33 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages708

Linkert carburetor hardware kit includes complete screw assortment and nylon shaft bushing set. Fits:FL 1936-1965G 1936-1957EL 1936-1952W 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement Items35-0341 - Linkert...

Needle valve lever with ball installed. Fits:FL 1941-1965U 1937-1948W 1937-1952EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Linkert carburetor float pin cap set. Fits:WL 1933-1952UL 1937-1948FL 1941-1965EL 1936-1940VL 1933-1934Additional Information OEM No.27383-11B UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages710

Linkert needle and seat includes a brass seat and stainless steel needle.The thread on the needle and seat body measures 7/16"-24. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with...

Brass gas strainer with screen, needle and seat.The seat fitting is included. *NOTE: Thread on needle seat is 1/8" NPT. Must order filter screen separately. Fits:FL 1941-1965W 1941-1952Additional Information UOM1 - SET ManufacturerV-Twin ...

This carburetor adapter is machined from billet stock with a natural finish. Allows the installation of the 40mm CV carburetor 4 bolt linkert to Big Twin manifold.For use with 40mm CV carburetors, connected by rubber sleeve. *NOTE: Rubber sleeve and...

Fuel strainer features a nickel finish over a machined red brass.Nickel fuel strainer is specifically for 1936-1937 M-5 linkert carburetors. Screen and gaskets not included. Must order filter screen and screws separately. The nut is features a 7/16"-24...

This Venturi will downsize the 4-bolt M-74 1-1/2" brass Linkert carburetor so that it can be used on a flathead model that originally had a 1-1/4" carburetor.This Venturi will allow the atmospheric air to pass thru the Linkert carburetor at a faster...

Left side petcock features 3/8"-18 National Pipe Thread, the body is machined from brass and the handle is steel, and has a zicad finish.*NOTE: Diassemble petcock, remove cotter pin, and use fine compound to "lap in" taper for a non-leak seal. ...

Fuel strainer is machined from copper that features a natural finish.The inlet and outlet fittings are 7/16" x 20 TPI. The nut is features a 7/16"-24 thread SAE. *NOTE: Must order filter screen, screws and gaskets separately. Fits:W 1936-1949EL...

18pc Linkert carburetor overhaul kit for 3-bolt linkerts with 1-1/4" throat. Kit includes black float, bushings, springs, float pin, stainless steel needle, brass seat and a 3-bolt insulator spacer.*NOTE: For the float arm installation, the center prong...

Linkert carburetor throttle lever is constructed of investment cast steel and has a cadmium plated finish. Fits:WL 1937-1952UL 1937-1948G 1937-1956Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages723

Parkerized intake manifold nuts with brass seals.Note: For use with a 3-bolt 61" manifold on large port knuckleheads. ...

Linkert 1-1/2" carburetor throttle disc is .025" oversize with correct bevel. Fits:FL 1940-1950FL 1952 61" OHVAdditional Information OEM No.27280-40A UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages708

Linkert carburetor bowl lock nut has a zinc finish. 4-piece kit includes large nut with stud, lock washer lock nut, and copper filled seal washer. The nuts are 3/4 X 20 thread. Fits:FL 1941-1965Additional Information OEM No.27375-29 UOM1 - KIT ...

Bombsight Venturi fits 1-1/2" M74 brass Linkert carburetors and is the performance dual venturi used on WR, MR-3, MR-4, KR and KH models. Has a 1-/32" inner tube suspended in the 1-1/4" main venturi. Includes Linkert Venturi removal tool.For 4 bolt...

M-74 linkert parts kit features a cadmium finish and includes restoration requirements for M-74 carburetors.*NOTE: Recommend to use kit when the carburetor body is painted black. Fits:FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin ...