Alloy finish Linkert carburetor float bowl.Float bowl does not have drain screw hole provision. Fits:FL 1941-1965EL 1936-1940Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708

Replica needle and seat set is constructed of a brass seat and a fitted stainless steel needle with a 7/16-24 thread. Fits:FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Includes black nitryl float viton tip, needle/seat, float arm, and pivot cap set for lever.*NOTE: For the float arm installation, the center prong of the float arm should have .003" of clearance, in order for the arm and needle to move freely. Fits:FL...

Plug screw is for Linkert carburetor idle fuel passage, constructed of stainless steel. Fits:FL 1941-1965Additional Information OEM No.27327-24 UOM5 - PK ManufacturerV-Twin OriginImported 2025 Catalog Pages708

Replica Linkert carburetor cork float includes shoulder bolt and screw.This cork float manufactured to OEM specifications and helps maintain a proper level of fuel in the carburetors float bowl for optimum performance. ...

Replica brass Linkert carburetor choke shaft has cam installed. Fits linkert carburetor M-18, M-41, M-42, M-51, M-52, M-54 and M-88.Hole for choke lever screw may have to be enlarged for some applications. Choke shaft accept choke levers with build in...

Linkert carburetor overhaul kit has a black nitrophyl float and a Viton tipped needle. Kit includes brass shoulder screw and brass nut. Nitrophyl black "M" float.*NOTE: Must order float lever separately. Fits:WL 1933-1952UL 1937-1948FL 1941-1965EL...

Petcock has 3/8"-18 National Pipe Thread, is machined from brass and features a zinc plated finish. Fits:EL 1936-1939Additional Information OEM No.3601-36 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages727

Linkert carburetor main nozzle is machined of solid brass for use with 1-1/2""Bombsight" venturi's.This has a longer venturi tube that must be to cut to correct length. Main nozzle holes must face intake manifold. Fits:FL 1941-1965Additional Information ...

Linkert carburetor air intake shaft stop Fits:FL 1941-1965Additional Information OEM No.27219-36 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708

Venturi is 1-5/16" and is for a M74B Linkert carburetor.The end with the screw hole is 1-9/16" and the other end is 1-5/8". Fits:FL 1941-1965Additional Information OEM No.27363-41 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708 ...

Alloy finish Linkert carburetor float bowl has flat top and provision for drain screw hole.Includes linkert carburetor float pivot pin with caps for float pivot arm. Order pivot arm separately. Needle valve seat opening is milled flat and sealed by...

M-5 Carburetor choke shaft can be used on M-5, M-25, M-35 and M-35T models.*NOTE: Requires detent plate for choke operation, V-Twin #35-1001, available separately. Fits:EL 1936-1947FL 1941-1947Additional Information OEM No.27218-36 UOM1 - EA ...

Carburetor choke rod has a parkerized finish. Fits:FL 1941-1947Additional Information OEM No.27244-40 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages711

SV replica linkert carburetor float bowl accepts 9/16" - 20 thread plug.Inlcudes 9/16 x 20 hex plug, with washer for bowl extension. Float bowl does have drain screw hole provision. Float bowl cap is on left side with hand facing carburetor intake...

Linkert carburetor main nozzle.Clearance for this main nozzle may need to be adjusted for exact fit on some bodies. Main nozzle holes must face intake manifold. Fits:WL 1933-1952UL 1937-1948FL 1941-1965EL 1936-1940VL 1933-1934Additional Information OEM...

Carburetor main nozzle for 1940-1951 Overhead Valve models.Main nozzle holes must face intake manifold. Fits:EL 1940-1951FL 1941-1951Additional Information OEM No.27331-40 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708

High speed carburetor needle valve with small head. Fits:FL 1940-1950Additional Information OEM No.27297-40 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708

Linkert service and hardware kit includes a nitrophyl float, zinc plated steel screw kit, gaskets, stainless steel needle and a brass seat.Made of hi-strength nylon. Press in, with no reaming necessary. Fits:FL 1941-1965EL 1936-1952G 1936-1956W...

Nylon bushings for Linkert carburetor throttle.Linkert throttle shaft bushings are constructed of high-strength nylon for ease of installation. Nylon Material: R108-118, N6. Set of 2. Fits:WL 1933-1952UL 1937-1948FL 1941-1965EL 1936-1940VL...

Linkert carburetor high speed needle valve.Features a fixed jet and is for Army use. Fits:WLA 1940-1952Additional Information OEM No.27298-40 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708 Tech NoteSuggested to use with #35-0395...

Knucklehead throttle lever material is cast brass. Clamping and idle adjustment screws are included.Lever features one hole for cable block location. Fits:FL 1940-1947Additional Information OEM No.1238-40 UOM1 - EA ManufacturerV-Twin OriginImported ...

Linkert fixed needle cap set.Sold as a pair. Fits:WLA 1940-1943Additional Information OEM No.27304-40 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages708 Tech NoteSuggested to use with #35-0460 Linkert High Speed Needle Valve.

Linkert carburetor bowl lock nut and drain is for use with all Linkert bowls. The nut and drain allows water to drain without removing the bowl.This special float bowl nut with a 1/4" allen drain screw, allows the draining of condensation and water that...

Linkert carburetor bowl lock nut and drain is zinc plated and is for use with all brass Linkert bowls. The nut and drain allows water to drain without removing the bowl.This special float bowl nut with a 1/4" allen drain screw, allows the draining of...

Zinc lock nut with linkert needle and seat kit.Kit is correct for 1949-1954 Tombstone tail lamps. Wire loom includes tail lamp piece on the fender end, spiral spring cover and segemented channel for wire loom. Fits:FL 1941-1965G 1936-1957EL 1936-1952W...

Retro intake manifold kit features the "Baby Butt" 3-bolt style for Knucklehead models with brass Linkert carburetors.Kit includes two parkerized nuts, brass seal set, 3 bolt Linkert flange and bright cadmium plated Baby Butt manifold. Manifold measures...

Linkert carburetor nylon bushing kit is for the throttle shaft on all brass linkert carburetors.Includes nylon throttle shaft bushing set, shaft ring and full stainless steel screw and nut kit. Steel and nulon bushings are available separately. Fits:FL...

Linkert carburetor adapter mounts to 4 bolt stock manifold to allow the use of a Mikuni or Dellorto 38mm spigot carburetor. Features a natural alloy finish.*NOTE: Clamps and rubber adapters not included. Fits:FL 1941-1965EL 1941-1952Additional...

Linkert carburetor adapter mounts to 3 bolt stock manifold to allow the use of a Mikuni or Dellorto 38mm spigot carburetor. Machined with natural alloy finish. Fits:EL 1936-1939G 1936-1957U 1936-1948W 1936-1952Additional Information UOM1 - EA ...

Linkert carburetor screw kit features zinc plated and stainless steel screws and washers for choke and throttle doors and air cleaner back plates.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Fits:FL 1936-1965G 1936-1957EL 1936-1952W...

Zinc plated linkert cable bracket kit includes the small cable u-clamp half, bracket and spring. Kit is for use with linkert carburetors.For use on left side Overhead Valve snap throttle installations. Fits:FL 1941-1965EL 1936-1952Additional Information ...

Replica Linkert carburetor cork float includes shoulder bolt and screw.This cork float manufactured to OEM specifications and helps maintain a proper level of fuel in the carburetors float bowl for optimum performance. *NOTE: Sold as a pack of 5. ...

45" WL cast iron intake manifold in a zinc finish is the 3 bolt replacement type for brass Linkert carburetors.*NOTE: Nuts and brass seals not included. Fits:WL 1936-1952G 1936-1973Additional Information UOM1 - EA ManufacturerV-Twin OriginImported ...

Linkert carburetor bean pot bowl with early style hex cap features a natural aluminum finish. Bean pot bowl shape allows additional fuel, giving access for long open throttle sessions.Larger inner diameter adds 1.45 cubic inches to hold additional fuel...

Linkert 38mm carburetor adapter kit includes a three bolt adapter, intake manifold rubber adapter, and two stainless steel hose clamps.Order intake manifold separately. Fits:UL 1937-1948WL 1935-1952Additional Information UOM1 - KIT ManufacturerV-Twin ...

Linkert M88 carburetor parts kit includes all components, except the brass body and throttle arm.WL and WLA must be fitted with aluminum heads. (Higher Compression) Fits:WL 1937-1952UL 1936-1948WLA 1937-1952U 1936-1948Additional Information UOM1 - KIT ...

Copper Linkert carburetor float bowl cap with 9/16 - 20 thread includes sealing washer.For use with Linkert carburetor float bowl and gaskets. Fits:FL 1941-1965Additional Information OEM No.27390-33 UOM1 - EA ManufacturerV-Twin OriginImported 2025...

Linkert carburetor body pin is 1/8" x 3/8". Fits:WL 1933-1952UL 1937-1948FL 1941-1965EL 1936-1940VL 1933-1934Additional Information UOM2 - PK ManufacturerV-Twin OriginImported 2025 Catalog Pages708

Linkert 34mm carburetor adapter kit includes a three bolt adapter, intake manifold rubber sleeve, and two stainless steel hose clamps.Order intake manifold separately. Fits:UL 1937-1948WL 1935-1952Additional Information UOM1 - KIT ManufacturerV-Twin ...