45 Solo front wheel include black rim, replica original style black hub, and bearings laced with stainless steel spokes.Includes backing plate installed. Hub width measures 6.5" ...

45 Solo front wheel includes a chrome 3.00 x 16" rim.For use with a 5.00 x 16" tire. ...

45 solo front wheel includes a replica black finish hub, laced with stainless steel spokes, bearings installed and a new old stock chrome rim.Includes backing plate installed. Hub width measures 6.5". *NOTE: Axle not included. ...

Raw rear 16" X 3" wheel rim. Rim is drop center design, and 40 spoke holes with large valve stem hole.This rim has a large side valve stem hole is 15mm and accepts rubber valve stems ...

18" x 2.25" VL front or rear wheel assembly includes a black rim, nickel plated spokes and nipples and a parkerized hub, laced and trued.*NOTE: Includes sealed bearing and lock nut. *Note: UPS may consider this part as packaged "oversize" for shipment,...

18" x 2.15" replica wheel kit includes a black star hub, black rim, cadmium spokes and nipples.Parkerized star cover and screw kit available separately. *Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual...

45" solo front wheel includes a chrome rim, a black hub and a stainless steel spoke and nipple set, laced and trued.*NOTE: Internals not included, must order separately. *NOTE: UPS may consider this part as packaged "oversize" for shipment, as compared...

19" x 2.50" star hub wheel includes a black star hub, with all internals, 40 stainless steel spokes and nipples and a drop center chrome rim.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which...

Replica 16" X 3.00" KH type wheel kit includes a chrome hub, black drop center rim, chrome spokes, and rubber rim strip.The valve stem hole is on the star side of the hub and measures 11/64" from the drum side flange. Accepts original type axles and...

18" x 2.15" VL front or rear wheel assembly includes a chrome rim, parkerized wheel hub and a nickel plated spoke and nipple set, laced and trued.*NOTE: Includes sealed bearing and lock nut. *Note: UPS may consider this part as packaged "oversize" for...

Replica 18" star hub wheel laced and tured using the replica Kelsey-Hayes rim (a V-Twin exclusive), stainless steel spokes and our proven chrome star hub.*NOTE: Star hub is assembled with all components. ...

16" Wolf wheel cover set features a raw finish. Includes a right star side and left drum side wheel cover.Offset is different for each side. For star hub applications. Fits:FL 1941-1966Additional Information UOM1 - SET MeasurementsAdditional...

Front 21" x 3.25" wheel assembly features a chrome hub with all internal bearings installed, 40 spokes, and a chrome rim laced and trued.*NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. Wheels...

Wolf star wheel features a raw finish with welded construction. 15mm valve stem hole is on star side of hub. Rim is 16".Accepts all OE type axles, sleeves for front or rear applications and rubber stem side valve inner tube. Wheel is constructed of 2...

Completely laced and trued with the replica Kelsey Hayes police style deep roll 16" x 3.00" rim (V-Twin's exclusive tooling), zicad plated spokes and nipples with a fully assembled black star hub.Wheel includes rubber rim strip. *NOTE: Zicad is a dull...

19" x 3.00" front or rear wheel features a chrome rim constructed of steel, laced with stainless steel spokes and nipples with a chrome star hub.Rim will accept the Shinko SR267 front and SR268 rear tires. 19" wheel includes drop center rim to fit dirt...

Chrome 21" WR spool wheel accepts a 7/16" axle.45 spring forks are 6-1/2" between the rockers. The rockers are mounted on the inside of the spring fork. Order 7/16" axle separately. Fits:W 1941-1952Additional Information UOM1 - EA ...

Description 19" WR/KR/XR rear wheel features a natural finish hub with 9/16" ball bearings and internals installed. Laced with 6-8 gauge stainless steel spokes to a black finish 19" x 3.0" 40 hole drop center rim. Accepts a 9/16" axle shaft.Sold laced...

Description 21" x 2.15" WR spool wheel features a nickel plated hub, stainless steel spokes and nipples and a black H-C type rim, which accepts a 7/16" axle.Includes 21" x 2.15 wheel assembly, that is laced and trued. Wheel hub has a 3/8" inner diameter...

Frame loop set is authentically forged in construction to fit the right and left set. Use on straight leg frames. Fits:FL 1955-1957EL 1936-1947U 1937-1948FL 1941-1947Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog...

Raw front engine mount features detailed forging with DIF numbers, fully machined.Front engine mount is authentically constructed with DIF forge mark and casting marks. Must be assembled by a competent frame technician. ...

Side car frame mount set with side car loops and embossed forging factory numbers and features a raw finish. For straight leg frame restoration or repair.Set is for use with straight leg Panhead and Knucklehead Big Twin frames. Forgings are drilled to...

V-Twin - 51-1946 - Replica inchHM inch Knucklehead 30  Rake FrameDescriptionKnucklehead frame is an authentic reproduction of the factory style bull neck frames, with numbered forgings, seat post junction, rear motor mount, front motor mount and rear...

V-Twin - 51-1942 - Replica inchHM inch Knucklehead 29  Rake Rigid FrameDescriptionKnucklehead rigid frame with a 29  rake neck angle is an authentic reproduction of the factory style featuring 12 brazed joints. Front side car loops, seat post mount,...

V-Twin - 51-1940 - Replica Knucklehead Frame 28  RakeDescriptionReplica frame is an authentic reproduction of the factory style with brazed joints. Frame will accommodate Knucklehead or Big Twin Flathead engines and 3 or 4-speed transmission. The 28 ...

V-Twin - 51-1939 - Replica inchHM inch Knucklehead 28  Rake FrameDescriptionReplica frame is an authentic reproduction of the factory style featuring 13 brazed joints. The 28  rake neck angle will accept inline spring forks. Features original DIF...

Transmission mount plate kit is a 4 piece kit used for final alignment. Kit is for use with Hardtail models and stock and custom rigid frames.Includes upper and lower stamped plates and 2 spools (dowels) with 3/8" x 24 threads. Spools must be welded in...

Engine mount shim is used to raise motor for front or rear clearance, when necessary.Sold in a pack of 5. Fits:FL 1941-1999EL 1936-1952Additional Information UOM5 - PK ManufacturerV-Twin OriginUSA

Black finish front engine guard attaches to footboard mounts and frame tubes using U-bolts.This 1936-38 style engine bar is differentiated by its flat shape sides, although it will fit as noted. Constructed of 1" diameter tubing with an accurately formed...

Chrome front engine bar.This 1936-38 style engine bar is differentiated by its flat shape sides, although it will fit as noted. Constructed of 1" diameter tubing with an accurately formed top mount. Restoration Quality! Order U-clips separately...

Rear brake clamp for 45 models fits on the right side to secure the rear brake backing plate.*NOTE: Must be welded in place. Fits:W 1937-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages815

Replica Knucklehead frame is a reproduction of the factory style frame.Frame includes seat post, brake cross shaft, rear axle assembly, transmission plate and a motor alignment plate pre-installed for safer shipping. Cross shaft bushings, correct tool...

V-Twin - 51-1040 - Replica 1936 Knucklehead FrameDescriptionReplica frame is an authentic reproduction of the factory style with 13 brazed joints. The 28  rake neck angle will accept inline spring forks. Features 1" down tubes with weld on side car...

Replica 45 W stock style rigid frame with brazed joints features a raw finish. There's No Manufacturer's Statement of Origin, only a Bill of Sale, referencing the part number.Don't forget the pre-assembly procedure! Before primer and paint, the frame...

Chrome front engine bar has 1" outer diameter.Order u-clamp separately. Bracket is offcenter by design. *WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very slow...

Engine bar with 1" tubing.Order U-clamp separately. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very slow...

Rigid frame bar for the rear with 7/8" tubing features a chrome finish.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made...

Rigid frame bar for the rear with 7/8" tubing features a black finish.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor...

Raw steel 45 W rear fender brace set includes chain guard mount tab and stock mount tabs that are used to bolt to frame.The straps measure 7/8" wide. The fender hoop brace is riveted to the factory mount tabs. Fits:WL 1941-1952Additional Information ...

Rigid hardtail frame raw steel rear section is the replica construction with components featuring brazed joints. Forgings do not have factory hallmark numbers.The rear transmission mounts are 2" from the bottom cross beam to the top of the plate. May be...