Oil tank bracket kit adds accurately formed stamping for use for restoration of original tanks.This is a 3 piece kit. *NOTE: Must be welded on. Fits:UL 1938-1947EL 1936-1940FL 1941-1964Additional Information UOM1 - KIT ManufacturerV-Twin ...

Engine bar features 1" tubing for Side Valve models.The width of 10-7/8" between the lower mount tabs. Fits:WL 1937-1952G 1929-1973Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Replica rear axle plate set includes detailed numbers forged in, and features a raw finish. Exact for detailed restoration!Custom application for weld and bolt on hardtails. Include correct hallmark late codes forged in place! ...

Lower frame brace tube is for under the main tank tube.1" diameter must be welded in place. Fits:FL 1948-1957EL 1938-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages638

Rigid brake cross shaft kit includes the tube with bushing set and stamped supprt set for the right outer mount.To hold cross shaft, installation requires welding or brazing. Use actual cross shaft for alignment. Fits:FL 1941-1957EL 1936-1952Additional...

Lower frame rail set is constructed of raw steel for rigid frame models.The left side tube has a flat portion for inner primary clearance. Fits:FL 1948-1957EL 1936-1947Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog...

Rear top frame tube set constructed of steel, featuring a raw finish, is for use with Knucklehead frames. Set connects the seat area to the rear axle plates.The front of the tube is channeled to fit the tank bar. Rear fender cross tubes are not included...

Lower frame tube brace set is for use on right and left rigid and straight wishbone frames.Set includes the right and left side, with chain offset. Set features factory style bends for replacement and restoration purposes. Tubes are shipped as raw DOM...

Fender cross brace kit for Knucklehead frames.Kit includes two saddles that must be brazed in place. Fits:EL 1936-1947FL 1941-1947Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages638

Rigid rear fender cross tube for use on Knucklehead frames features a raw finish.Rigid frame cross tube is for rear fender mounting. Must be cut to final length and welded in place. The front flattened end must be brazed in place. *NOTE: Add required...

Seat post rigid frame tube is constructed of steel and features a raw finish.Bushings not inclulded. Must be cut to final length and welded in place. *NOTE: Does not include the lower spool insert for rod. Fits:FL 1948-1957EL 1936-1947Additional...

Kit includes two weld on spools for rigid and FXST frames and must be welded on.For use on 1936-1999 rigid frames. ...

Replica frame neck forging has a 28  rake and is machined to accept stock diameter tubing.Features original DIF forging marks on the left side of the neck. Neck is drilled for a 7/8" lower horitontal tube. Fits:EL 1936-1940Additional Information UOM1 -...

Bull neck frame forging has a 30  rake and is machined to accept stock diameter tubing. Fits:FL 1946-1947 early 1947Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages639

Rigid Big Twin lower frame tank mount set needs to be welded on for restoration or repair.Mounts are constructed of steel and have a raw finish. May require finishing prior to installing. ...

Frame brace saddle fits on rear frame cross bar for use on the rear fender. An exact Replica on a Knucklehead frameSaddles must be brazed on. Fits:EL 1936-1947FL 1941-1947Additional Information UOM1 - SET ManufacturerV-Twin OriginImported TypeWeld-on...

V-Twin - 51-0594 - Knucklehead Seat Mount Description Seat mount for Knucklehead models. Fits: EL 1936-1947 Additional Information UOM 1 - EA Manufacturer V-Twin Origin Imported Style Stock 2025 Catalog...

This original style frame mechanical brake shaft crossover tube includes one bushing, and grease fitting. Fits:UL 1938-1947EL 1936-1940FL 1941-1957Additional Information UOM1 - EA MeasurementsAdditional InformationLength: 6-1/4" ...

Rigid Big Twin crossover shaft frame brace comes in left and right. Fits:UL 1938-1947EL 1936-1940FL 1941-1957Additional Information UOM1 - SET ManufacturerV-Twin OriginImported TypeRigid

Rigid frame front oil tank mount casting to be welded on.Thread is 5/16 x 24 and the lip from the bottom to the top measures 1-1/4". For use with 1-1/2" bar. Fits:FL 1941-1984FX 1972-1984EL 1938-1940Additional Information UOM1 - EA ManufacturerV-Twin ...

Rigid frame rear engine mount and front transmission mount. Fits:UL 1938-1947EL 1936-1940FL 1941-1957Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages638

Oil tank lower tab kit. Fits:UL 1938-1947EL 1936-1940FL 1941-1957Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages742

Rigid frame side car loop set to be welded on for restoration or repair. The loops are machined spools. Fits:EL 1936-1940FL 1941-1957Additional Information UOM1 - SET MeasurementsAdditional InformationOuter Diameter: 1.689"Inner Diameter: 0...

Rear tank frame mount tabs. Fits:FL 1941-1984EL 1936-1947U 1937-1948Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages729

Rigid frame 5th transmission mount to be welded on for restoration or repair. Fits:EL 1936-1940FL 1941-1957Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA TypeRigid 2025 Catalog Pages638

Replica 1936 style raw steel frame side car mount set is for attachment by brazing.This mount set can also be used on custom frames by welding. Fits:EL 1936-1936Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages639

Brake cross shaft kit is for stock and replica rigid frames.Includes right side tube with bushing, strap bracket set and grease fitting. Fits:FL 1941-1957EL 1936-1948Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported TypeRigid

45" front engine clutch cable mount features a raw finish and must be welded to the center tube. Fits:G 1941-1973W 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeLock Washer 2025 Catalog Pages815

Front engine brake strap. Fits:W 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages815

Front engine coil mount. Fits:W 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages815

Front engine top motor mount. Fits:W 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages815

45" transmission and motor base forging set holds transmission and connects center post and front down tube.2 pieces welded as an assembly. Fits:W 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages815

Weld on hardtail assembly features a raw finish, forged cross bar and rear axle plates on original WL 45 solo's.Installation requires a qualified fabricator and welder. Must be welded on and the fabricator must construct pieces to connect to frame...

Front engine mount weld on frame brace for 45 solo frames.*NOTE: Frame parts are forged and machined using tooling exclusively by V-Twin MFG. Fits:W 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeWeld-on 2025 Catalog...

45" Side Valve Rigid cast neck is constructed of raw steel forging and is machined to accept stock size frame tubes.Accepts 7/8" neck cups, not included. *NOTE: Frame parts are forged and machined using tooling exclusively by V-Twin MFG. ...

Rear frame engine mount and front transmission mount for 45 solo frames, and features a raw steel construction.Has a hole for the rear clutch and brake strap shaft, the shaft holds the brake bell crank on the right side. Fits around the center seat post...

45 front control rod forging features a raw finish.Braze on to front down tube to support brake and clutch strap, and jiffy stand on the left side. Fits:W 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog...

Rear frame right and left axle plates with oiled raw steel finish for 45 solo frames, constructed of forged steel.Must be welded in place. ...

45 WL rear fender mount brace is original style featuring raw steel forging that attaches to frame rails.*NOTE: Frame parts are forged and machined using tooling exclusively by V-Twin MFG. Fits:W 1936-1952Additional Information UOM1 - EA ...

This top frame part is machined to accept rear tube, center seat post tube and upper and lower gas tank tubes.Brace has threaded holes for the rear fender and battery box. ...