M-74 linkert parts kit features a cadmium finish and includes restoration requirements for M-74 carburetors.*NOTE: Recommend to use kit when the carburetor body is painted black. Fits:FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin ...

Replica zinc plated intake manifold features a longer lip for attaching o-ring and flat seals, with stainless steel V-Twin clamp with shoe.This intake manifold will help improve the performance by improving your air and fuel flow to the carburetor...

Bombsight venturi fits 1-1/2" brass Linkert carburetors, kit includes removal tool which includes three interchangeable adaptors to service all carburetors. Fits:FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

Replica needle and seat set is constructed of a brass seat and a fitted extended viton tip needle.Threads on this needle and seat assembly is 7/16 x 27. Includes gasket. *NOTE: Needle features a viton insert. Solid stainless steel needle seat sets...

Linkert carburetor throttle disc is .020 oversize and is for a 1-1/2" carburetor. Fits:FL 1941-1965Additional Information UOM1 - EA MeasurementsAdditional InformationOuter Diameter: 1.6027" ManufacturerV-Twin OriginImported 2025 Catalog Pages710

Linkert carburetor throttle disc is .010 oversize and is for a 1-1/2" carburetor. Fits:FL 1951-1965Additional Information UOM1 - EA MeasurementsAdditional InformationOuter Diameter: 1.5927" ManufacturerV-Twin OriginImported 2025 Catalog Pages710

Linkert carburetor throttle disc is .005 oversize and is for a 1-1/2" carburetor. Fits:FL 1951-1965Additional Information UOM1 - EA MeasurementsAdditional InformationOuter Diameter: 1.5877" ManufacturerV-Twin OriginImported 2025 Catalog Pages710

Intake manifold nut and seal kit is for linkert carburetors and plumber type manifolds.Includes two parkerized nuts and two machined brass seals. Fits:FL 1941-1954EL 1940-1952Additional Information UOM1 - KIT MeasurementsAdditional InformationLength:...

Replica needle and seat set is constructed of a brass seat and a fitted solid stainless steel needle.Needle kit is fitted with a solid stainless steel needle.Threads on this needle and seat assembly is 7/16 x 27. Includes gasket. Needle kits with Viton...

Flathead zicad plated intake manifold kit has brass packing rings and parkerized nuts.*NOTE:: Zicad is a dull shade of zinc similar to cadmium. Fits:G 1937-1973W 1937-1952Additional Information OEM No.27011-36 UOM1 - KIT ManufacturerV-Twin ...

Linkert carburetor throttle lever features a natural brass finish.Lever features one hole for cable block location. Fits:UL 1937-1948WL 1937-1952G 1936-1956Additional Information OEM No.27252-37 UOM1 - EA ManufacturerV-Twin OriginImported 2025...

2023 New Production linkert carburetor needle valve lever includes the shoulder bolt, spring collar, seat and brass needle valve lever. Lever is cadmium plated.. Fits:FL 1941-1965Additional Information OEM No.27395-27 UOM1 - KIT ManufacturerV-Twin ...

Cadmium plated linkert carburetor throttle lever.Lever features two holes for cable block location. Fits:FL 1948-1948Additional Information OEM No.1238-48 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708

38mm Flatslide carburetor kit is 3 bolt type for Indian or UL models. Kit includes adapter to accept CV air cleaner.Kit includes 38mm OKO brand Flatslide carburetor, spigot 3 bolt adapter with rubber tube connector, cable and Anderson twist grip kit...

45" intake manifold kit includes a parkerized 3-bolt manifold and zicad nuts with brass seals.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Fits:G 1937-1973W 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

Linkert throttle lever base is only for linkert 4 bolt model carburetors is cast as original. Fits:EL 1948-1952FL 1948-1965Additional Information OEM No.27260-49 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708 Tech NoteSuggested...

Brass intake manifold seal kit is used for installing 61""Baby Butt" manifolds on 1940-1954 Big Twins.For use with a Baby Butt manifold. Order nuts and seals to fit big port 74" Knuckleheads. Fits:FL 1940-1954Additional Information UOM1 - KIT ...

Bombsight Venturi fits 1-1/2" Linkert carburetors and is the performance dual venturi used on WR MR-3, MR-4, KR, and KH models. Has inner tube suspended in the 1-1/4" main venturi.The construction resembles a WWII "bombsight". This venturi will replace...

Black intake manifold clamp set includes o-ring style seals and fillister screws. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information OEM No.27063-57 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages718

Carburetor main nozzle for 1940-1951 Overhead Valve models.Main nozzle holes must face intake manifold. Fits:FL 1941-1951EL 1948-1951Additional Information OEM No.27331-40 UOM1 - EA ManufacturerV-Twin OriginUSA

Linkert carburetor bracket is laser cut and features a stainless steel finish. Bracket is for right side carburetor installations. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Kit includes 38mm OKO flatslide carburetor with built in choke activator, spigot intake manifold, throttle cable, two bolt flange adapter and twist grip set.Kit includes seal adapters for use with the flat band type seals, which are provided. Carburetor...

Kit includes 38mm flat side carburetor with built in choke activator, spigot intake manifold, throttle cable, twist grip set and 4 bolt flange adapter.Kit is for o-ring style, like the original or converted heads. Carburetor is OKO brand. In order to...

Linkert carburetor throttle shaft kit includes a one piece design shaft machined from solid brass! Shaft is for 1-1/2" Linkert brass carburetors. Includes two steel bushings, to arm, spring and screw kit. Fits:FL 1941-1964EL 1940-1952Additional...

Intake manifold nut set for features a parkerized finish and is used for installing 61""Baby Butt" manifold on 1940-1954 Big Twins. Fits:FL 1940-1954Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages712 Tech...

Kit includes round deco chrome knob, knurled chrome knob, zinc top cap, seal, spring, screw, and washers. Fits:FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages1195

Linkert 1-1/2" carburetor throttle disc is standard size with #12 markings and correct bevel. Fits:FL 1940-1950FL 1952 61" OHVAdditional Information OEM No.27280-40 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708

Natural CV carburetor kit is for Panhead Big Twins. Kit includes CV 40mm carburetor, intake manifold, adapter support bracket, enrichner assembly and manifold clamps.Throttle is operated by single pull cable operation only, not push-pull. *Enricher is...

Kit includes black nitrophyl float lever and pins. Fits:WL 1933-1952UL 1937-1948FL 1941-1965EL 1936-1940VL 1933-1936Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages709

Zinc plated linkert bracket cable screw features a 4mm thread and is for linkert snap throttles.*NOTE: Screws into snap throttle bracket. Fits:FL 1941-1965U 1937-1948Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech...

Kit includes chrome knob, zinc top cap, seal, spring, screw, and washersLower brass washer not included Fits:FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages1195

Petcock with threaded end for fuel line has a natural finish on zinc construction.The hose size measures 7/16 and features a lever on both sides. Fits: K 1952-1954 Additional Information OEM No. 62125-50 UOM 1 - EA Manufacturer V-Twin Origin...

Intake manifold clamp set is a two piece set with nut style clamps. Unique design will give the vintage "plumber" manifold look for later Panhead and Shovelhead models.Set includes screws, o-ring and seal used to tighten for a complete lock. Sold as a...

Alloy OKO Panhead 1-7/8" shorty carburetor kit is for models with o-ring type heads for intake manifold. It has a relocated accelerator pump nozzle for increased throttle response. 1-7/8" intake manifold accepts o-rings and clamps.Will accept S&S bolt...

Black hex petcock is forward facing and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot. On/Off handle is black.For early style 5/16" NPT petcocks on Pre-1975 styles. Fits:FX 1971-1974XL 1955-1974FL...

40mm CV carburetor kit fits 1937-1948 Big Twin side valves and 1930-1951 Indian Chiefs. Kit includes CV adapter with 3 bolt pattern.For use with external throttle assembly. Fits 3-bolt manifolds to replace linkert carburetor. Additional hardware will be...

Nickel plated intake manifold nuts fit a 1-9/16" outside diameter manifold, includes two brass seal rings.Sold as a set of 2. Fits:UL 1937-1948EL 1936-1939WLD 1940-1946VL 1930-1936WL 1932-1936Additional Information OEM No.27050-30 UOM1 - KIT ...

Linkert M51L 1-1/4" carburetor hardware kit includes all parts except brass body and throttle arm.This is for 1-1/4" bore linkert carburetors. Fits:WLD 1937-1952WL 1937-1952WLC 1937-1952U 1941-1948WLA 1937-1952WR 1941-1952Additional Information UOM1 -...

M-16 linkert needle valve lever kit is for 1" carburetors and includes hex bolt, spring, brass lever and collar.Kit includes a 7/8" venturi. Lever fits all 1" Linkert carburetors on M-2, M-4, M-5, M-6, M-7, M-8, M-11, M-12, M-16, M-17 and M-18 models. ...

M-16-18 Linkert hardware kit for 7/8" + 1" brass linkerts. Fits:FL 1941-1965G 1932-1956RL 1930-1936W 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages709 Replacement Items2328-1 - Carburetor Venturi...