Replica chrome 5-3/4" stock style headlamp includes 12 volt sealed beam and has two studs on the back for wiring.*NOTE: For show or decorative use only and are not D.O.T. approved. Fits:XL 1954-1973FX 1971-1973FXE 1971-1973Additional Information UOM1 -...

Guide spotlamp kit is the early taller type, feaures mount bracket with Guide markings.Kit includes one complete 6 volt lamp with 1 clear lens installed and includes one additional red and one amber lenses. Lamp features accurate replica toggle switch...

Guide bullet marker lamp lens set features fish-eye style lens from "Guide" tooling with all the original style markings. The set includes 2 clear, 2 red, 2 amber, and 2 white colored lenses to make a set of 8. Lens are glass.Front of the lens reads...

7" K model headlamp features a black shell with chrome rim, assembled with 6 volt beck seal beam and 2 indicator lamps.Assemble with Beck logo centered at the bottom. Adjust bulb until it is centered. Includes two red lens installed in housing for...

Chrome guide Spring Fork spotlamp set includes a 6 volt 35 watt clear bulb, swivel and hardware.Genuine Replica Guide Product Licensed by GM, has Guide logo on bracket. Spotlamps include replica toggle switches with correct shape balled handle. Mount bar...

Oil tank line connector fitting comes with a nut and brass sleeve. Fits:XL 1957-1961K 1952-1956Additional Information OEM No.63533-52 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages821

Big Twin 4 piece tappet screw and lock nut kit. Fits:EL 1936-1940FL 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Left hand magneto rotor has a tapered shaft. Fits:FL 1941-1969EL 1936-1952Additional Information UOM1 - EA MeasurementsAdditional InformationWidth: 9.7mmLength: 12.8mmHeight: 12.1mm ManufacturerV-Twin OriginImported

Handlebar wiring with turn signal. Fits:G 1965-1969Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages816

Handlebar wiring features cotton braided wires. Fits:G 1936-1964Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages816

Tail lamp wiring features cotton braided wires.NOTE: Tail lamp wires are red and green. Fits:FL 1948-1969Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages1118

Distributor to coil wire is black with white tracer cloth covered wire. Wire is for use with single point distributor manual advance models.Asphalt type loom measures 10-7/8". The #14 gauge wire is 27" long. Fits:VL 1930-1934EL 1936-1947FL 1941-1964UL...

Small starter wire kit is PVC type. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages689

Main wiring harness kit features cloth covered, color coded wire as original. Main harness kit fits XLCH kick starter models with magneto. Fits:XLCH 1965-1969 kick starter models with magnetoAdditional Information UOM1 - KIT ManufacturerV-Twin ...

Main wiring harness kit features cloth covered, color coded wire as original. Main harness kit fits XLCH kick starter models with magneto. Fits:XLCH 1958-1964 kick starter models with magnetoAdditional Information OEM No.70320-58 UOM1 - KIT ...

V-Fire auto advance distributor features a zinc plated body and chrome top. Distributor is completely assembled with gear and all internal parts and features a two bolt flange. This is single point type with updated timing marks.For Overhead Valve Big...

V-Fire auto advance distributor features a zinc body and top. Distributor is completely assembled with gear and all internal parts and features a two bolt flange. For Overhead Valve Big Twin models. This is a single point type.Point lead wire not...

Distributor roll pin measuring 5/8" x 3mm. Fits:FL 1941-1965EL 1936-1940Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #32-8072 V-Fire Overhead Valve Auto Advance Distributor ChromeSuggested to use...

Wiring harness kit fits Hummer models with battery. Fits:Hummer 1947-1965 BatteryAdditional Information OEM No.70322-53 UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages820

Wiring harness kit fits Hummer models with magneto. Fits:Hummer 1947-1965 MagnetoAdditional Information OEM No.70322-55 UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages820

V-Fire auto advance distributor features a chrome body and top. Distributor is completely assembled with gear and all internal parts and features a two bolt flange. This is a single point type without timing marks.For Overhead Valve Big Twin models...

Wiring harness kit features cloth covered, color coded wire as original. Harness kit is for electric start XLH, battery type, 6 volt systems. Fits:XLH 1959-1964 Electric start battery type 6 volt modelsAdditional Information OEM No.70320-59 UOM1 - KIT ...

Wiring harness kit features cloth covered, color coded wire as original. Wiring kit fits XLH battery type models. Fits:XLH 1965-1966 12 volt battery XLH modelsAdditional Information OEM No.70320-65 UOM1 - KIT ManufacturerV-Twin OriginUSA 2025...

Tail lamp wiring only Fits: G 1934-1969 Additional Information UOM 1 - EA Manufacturer V-Twin Origin USA 2025 Catalog Pages 1118

Wiring harness kit is 6 volt type featuring original style cloth covered wires. Fits:K 1952-1956XL 1957-1958Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages821

Handlebar turn signal wire kit features cotton braided wire and asphalt loom. Fits:FL 1949-1969Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages689

Chrome ignition coil is steel jacketed, and includes nuts, packing and wires. This 6 volt coil is for single point distributors.Coils are factory tested before packaging. Over 10,000 positive and negative sides sold! *NOTE: Coil mounts directly to the...

Distributor points plate for 2 bolt type auto advance distributors. Fits:FL 1941-1969Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages667 Tech NoteSuggested to use with #32-8213 Big Twin Overhead Valve Auto...

Starter pinion gear bushing for electric starter gear and shaft. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #32-2095 Open Electric Start KitSuggested to use with...

York starter gear and shaft for use with FX-FL electric starter kit.*NOTE: Starter kit is filled with an OEM type starter, available from different companies. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA ManufacturerV-Twin ...

1952-1977 FL electric starter mount bracket features an alloy machined aluminum construction finish. Allows starter motor to mount on top of transmission.For use on ultima 1.4k starter kit. Fits:FL 1952-1977Additional Information UOM1 - EA ...

Starter pinion gear screw. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #32-2095 FX-FL Electric Starter Kit

Zinc plated electric starter adapter plate for cast inner primary covers on 4-speed models.Accepts york electric starter kits. Mounts to inner primary with 5/16" screw in front hole and 1/4" in rear hole. *NOTE: Drill out 1/4" holes where original...

V-Fire electronic ignition system includes rotor and pickup sensor.Ignition system mounts on 6-volt stock point type distributors. When installed, distributor assembly retains stock look for restoration projects. Fits:FL 1948-1969Additional Information ...

Zinc plated Shovelhead clamp for mounting distributor in 1936-52 EL and 1941-64 FL models. This is a 2 mount hole at base only.For use with v-fire Big Twin Overhead Valve auto advance distributors *NOTE: Outer one used 1/4" x 20" or 1/4"-24, check thread...

Starter mount plate features a machined alloy finish.For use with tin primary covers. *NOTE: For ratchet to transmissions use with V-Twin clutch hub and starter. Fits:FL 1941-1964Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Electronic ignition conversion kit. Fits:FL 1948-1969Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement Items32-2534 - V-Fire Electronic Ignition32-1337 - Distributor Wire Loom Clips (10pc)

Coil kit includes a 12 volt replica brass plated coil, wire set, zinc plated distributor with top and mount bolts.*NOTE: Must order coil mount stud separately. Fits:FL 1948-1962Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported ...

Coil kit includes a 6 volt replica brass plated coil, wire set, zinc plated distributor with top and mount bolts.*NOTE: Must order coil mount stud separately. Fits:FL 1948-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported ...

V-Fire auto advance distributor features a chrome body and top. Distributor is completely assembled with gear and all internal parts and features a two bolt flange. This is single point type with updated timing marks.For Overhead Valve Big Twin models...