Magneto advance arm with magnet.The magnet is used to hold the arm in position by adhering to the points cover screw. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Magneto advance post for advance arm kit. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

York 2.0 kW starter kit for installing electric starter kits features a black finish with the flange mount design. Fits:FL 1958-1964Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #32-1502 York...

Burkhardt offset Big Twin magneto base assembly includes the shaft, shaft drive spiral gear and (2) drive gears.For magneto installation. Assembly fits stock Big Twin cases. Fits:FL 1941-1969Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 32-1873 - Overhead Valve 32E Panhead 12 Volt Alternator KitDescriptionThis 32E Knucklehead, Panhead and flat side Shovelhead includes a black 12 volt alternator with a chrome end cover. Kit also includes black finned solid state regulator and...

Main dash coil wiring harness assembly runs from the dash panel to the OEM type terminal box mounted behind the coil or dual point coils.*NOTE: Made from 16 gauge cotton braided over vinyl wire with machine crimped and insulated #6 of the red and green...

3-Brush Generator Hardware Kit includes gaskets, insulators and screw kit.Kit includes generator and generator to case, end cover gasket, housing gasket. Includes drive end seal, positive terminal screw with fitting, and positive terminal screw kit...

V-Fire Side Valve distributor assembly is zinc plated with a chrome top and features a one piece V-Fire point and condenser.The one piece style V-Fire point stay in adjustment and are more readily available for replacements. Distributor is considered...

Burkhardt Magneto rotor assembly. Fits:FL 1941-1969EL 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Burkhardt Magneto lower drive assembly. Fits:FL 1941-1969EL 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages679 Replacement Items32-2094 - Magneto Inner Stud Mount Set12-0986 - Clutch Retaining Ring

XLCH Magneto advance assembly includes all necessary pieces to have a cable operated advance on XL-WL magnetos. Fits:XL 1957-1970Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages1303 Replacement Items32-1348 -...

Horn and dimmer switch set is an accurate replica. Switches include cloth covered wires as the original. The dimmer switch is 3 wire and the horn button is 1 wire. Both switches is developed with new 2020 tooling technology. Fits: FL 1941-1972 J...

Battery negative 6 volt ground wire. Fits:FL 1941-1964EL 1936-1952Additional Information OEM No.70209-36 UOM1 - EA MeasurementsAdditional InformationTotal Length: 7-1/4"Center to Center: 7" ManufacturerV-Twin OriginUSA Size7 inch Type6...

XR Burkhardt magneto head assembly for XR-WR-KR front mount magnetos, (in generator position) with a tapered shaft.The magneto shaft is tapered to accept the tapered gear without the key way. Fits:K 1952-1956U 1937-1948W 1937-1952Additional Information ...

V-Twin - 32-1786 - V-Fire Retro Panhead Distributor AssemblyDescriptionV-Fire Big Twin retro distributor features the original look with updated top, fitted with "V-Fire" points and condensor installed under the top. Body and band are zinc and the top...

Left hand magneto points base plate.Left hand rotation is opposite of the standard Harley rotation. Fits:FL 1941-1969EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages1303

Burkhard magneto retard kit includes a clear top, gasket, ignition points and condenser kit and arm with mount pin for installation.This kit is for right hand (clockwise) rotation magnetos, XLCH Panhead, clockwise when viewing points cam rotation (only)...

Starter cable set is a 3 piece set.This three piece set includes one 6 gauge battery cable with 13/32" and 11/32" holes sizes and two 8 gauge black battery cablew with 17/16" and 11/32" hole sizes, with heat shielded terminal ends. PVC plastic coated...

6 volt generator kit includes 6 volt generator and 6 volt solid state regulator.Kit accepts 5/16 x 24 mount screws for either "K", Sportster, Flat Side or 45 motors. *NOTE: Must order gears, screws and mount bolts separately. Fits:K 1952-1956FL...

XR/XL/WR magneto drive assembly includes gears and related mount plates, for 45" motors when installing a front mount magneto in place of the generator.2 idler gear spindles are supplied, the XR magneto idler gear stud raw is how an XR is done. The 45"...

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:FL 1965-1985Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages678 Replacement Items37-0153 - Allen Flat Head Screws Chrome 1/4"...

XL 12 volt alternator gear kit includes gear, nut, spacer and deflector washer. Kit is for 32E 12 volt style alternator.Accepts 1/4 or 5/16 mount screws. Fits:XL 1958-1983Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog...

Auto advance distributor assembly features a natural zinc finish. Fits:FL 1941-1965EL 1936-1940Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement Items32-8213 - V-Fire Big Twin Overhead Valve Auto Advance Distributor...

6 volt 32E generator armature. Fits:UL 1937-1948VL 1932-1934EL 1936-1940FL 1941-1957WL 1932-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages694

Electric starter. Fits:FL 1941-1964Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

32E 12 volt alternator gear kit is used to install alternators with 1/4" mount screws. Kit includes generator strap.Replaces 1936-1957 3 brush and 1958-1969 2 brush generators. *NOTE: 32E alternator kit can be fitted with 1/4 x 24 screws, generator...

Zinc plated circuit distributor top for single point distributor manual advance models and 2 piece points set. Points brass stud measures 5.05mm, slightly over 3/16".Includes hardware, adjuster clip, stud and brass post and wire terminal. *NOTE: Order...

Kit includes a 2 brush generator gear, 2 brush generator oil deflector and washer. Fits:G 1958-1973Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages695 Replacement Items32-1363 - 2-Brush Generator Gear32-0217 -...

2.0 kW starter motor includes a 9 tooth starter gear and 6 screw mounting for electric starter kits.Mounts with 6 screws on face. MFG # WW1370. Fits:FL 1958-1985Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to...

Early 3 way key switch features a die cast body with the off/on/on positions, and includes 2 small early style brass Chicago style brass keys, for XLCH applications.Threaded body has a 3/4" outer diameter. Fits:XLCH 1959-1972Additional Information OEM...

Chrome alternator bolts on in place of original 12 volt generator. Chome state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor magnets, which are encased in a stainless steel shell...

Chrome alternator bolts on in place of original 12 volt generator. Includes chrome solid state regulator, gear, gasket and mount screw set.Features high power output, 17 amps @ 1000 rpm. *NOTE: On 1941-57 models, generator screw holes must be enlarged to...

Black alternator bolts on in place of original 12 volt generator. Black solid state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor magnets, which are encased in a stainless steel...

Includes a black 6 bolt generator, a 13 tooth generator gear kit, a black 6 volt solid state finned regulator and a chrome regulator mount bracket.Bracket is used to mount regulator to the front motor mount bolts. *NOTE: Must order 5/16" x 24 thread...

Starter solenoid kit includes a zinc solenoid, plunger assembly kit and an end cover boot. Fits:FL 1965-1984FXST 1987-1988Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages355 Replacement Items32-7571 - Solenoid...

Distibutor lead wire for V-Twin automatic advance distributors includes the terminal clip. Fits:FL 1941-1960EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages667 Tech NoteSuggested to use with #32-8072...

Terminal board screw set. Fits:FL 1948-1964Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages687

Big Twin coil mount with swtich bracket mounts bolts on to existing studs on FL and FX frames but does not accept cover. Mount features a raw finish.Bracket does not accept coil cover. *NOTE: Must order coil mount studs separately. Fits:FL...

Overhead Valve 6 volt distributor base with gear installed is white zinc plated.For use with Overhead valve models without an oil slinger. For gear installation, use a solid pin to fasten the gear to shaft as the original. Fits:FL 1941-1960EL...

York electric starter kit. Fits:FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported