Black dual point coil is 6 volt type and has a round shape.**NOTE:Check the coil primary resistance requirements from the manufacturers of the ignition being used. Fits:FL 1961-1964Additional Information OEM No.31604-61 UOM1 - EA ManufacturerV-Twin ...

Ground terminal wire. Fits:XLCH 1962-1965Additional Information OEM No.29625-62 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages1303

Ground terminal wire.NOTE: Distributor top is original design with the spring clip fastener. Top is not interchangeable with early OE tops. Fits:XLCH 1958-1961Additional Information OEM No.29625-55 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog...

V-Fire completed electronic distributor assembly includes distributor body and shaft with reverse tooth gear, single fire electronic ignition unit, sensor cup, wire and hold down clamp.Distributor top can be removed without removing front head...

New Old Stock" Knucklehead license plate bracket features a raw finish and is for the beehive tail lamp.This is the early replica of the 1980's for replacement. Fits:UL 1939-1948EL 1939-1940G 1939-1948FL 1941-1948Additional Information OEM No.68150-39 ...

Auxiliary seat spring frame cross stud with spacer. Fits:FL 1958-1984Additional Information OEM No.52605-65 UOM1 - KIT ManufacturerV-Twin OriginImported StyleStock 2025 Catalog Pages1252 Replacement Items37-8792 - Auxiliary Seat Spring Rod Nut Set

Auxiliary zinc seat spring kit with chrome springs, brackets, nut set, and buddy seat spring bar.Kit adapts to all plunger mounted buddy seats for extra weight capacity. Fits:FL 1965-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA ...

Auxiliary seat spring yokesSold in a quantity of 2. Fits:FL 1965-1984Additional Information OEM No.52596-65 UOM1 - SET ManufacturerV-Twin OriginUSA StyleStock 2025 Catalog Pages1253

Auxiliary seat spring bracket catch set.Sold in a quantity of 2. Fits:FL 1965-1984Additional Information OEM No.52586-68 UOM1 - SET ManufacturerV-Twin OriginUSA StyleStock 2025 Catalog Pages1253

Auxiliary buddy seat spring bar. Fits:FL 1965-1984Additional Information OEM No.52566-65 UOM1 - EA ManufacturerV-Twin OriginUSA StyleStock 2025 Catalog Pages1253

Auxiliary spring buddy seat bracket set. Fits:FL 1965-1984Additional Information OEM No.52583-68 UOM1 - SET ManufacturerV-Twin OriginUSA StyleStock 2025 Catalog Pages1253

Zinc windshield extension bracket set.Sold as a set of two. Fits:FLH 1960-1984Additional Information OEM No.58107-60 UOM2 - SET MeasurementsAdditional InformationCenter to Center: .277" ManufacturerV-Twin OriginUSA 2025 Catalog Pages776

Zinc windshield mounting bracket set includes right and leftSold in a quantity of 2. Fits:FLH 1949-1984Additional Information OEM No.58095-49 UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages776

Windshield bracket kit is for the FL models not equipped with spotlamps. Fits:FL 1949-1959Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages776 Replacement Items49-0170 - Windshield Extension Bracket Zinc31-9954 -...

Chrome 9" rear mount bar for rear turn signals.The distance between the mounting holes measures 5-3/16" center to center. Fits:FL 1963-1973Additional Information OEM No.68526-63C UOM1 - EA MeasurementsAdditional InformationCenter to Center:...

Rubber horn power pack mount Fits:FL 1954-1964Additional Information OEM No.69013-54 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages1172

Distributor Spark Control Cable Bracket.Bracket is without trumpet horn installation. ...

Zinc plated carburetor upper and lower support bracket with hardware kit is for fitting a CV carburetor to a 1948-1985 Big Twin motor. Kit is used to mount motor case bolt between cylinders.This 2 piece bracket has a flange that mounts to the carburetor...

Steel fork boot retainer washer for XL models.Sold in a quantity of 2. Fits:XL 1957-1970Additional Information OEM No.46010-54 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages821

Stainless steel exhaust clamp set includes two front pipe clamps and one muffler inlet end clamp.*NOTE: Hardware not included. Must order bolt sets, muffler body clamp, header clamps and rear clamp separately. Fits:FL 1941-1957EL 1941-1952Additional...

Chrome exhaust clamp set includes two front pipe clamps and one muffler inlet end clamp.*NOTE: Hardware not included. Must order bolt sets, muffler body clamp, header clamps and rear clamp separately. Fits:FL 1941-1957EL 1941-1952Additional Information ...

Chrome exhaust five piece pipe clamp set. Fits:ULH 1941-1948Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

This 4 piece servi-car muffler hanger bracket kit is for large out diameter mufflers and features a parkerized finish.Includes strap clamp to mount to battery box tab and 90  angle bracket. Does not include the tube clamp for Servi-Car models using the...

Exhaust clamp kit is for two into one single exhaust. Front pipe clamp set has parkerized finish and muffler hanger clamp and inlet clamp have brushed stainless finish.Order bolt seats separately. Fits:FL 1958-1969Additional Information UOM1 - KIT ...

Parkerized exhaust five piece pipe clamp set. Fits:UL 1941-1948Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages818

Exhaust clamp kit is for two into one single exhaust. Front pipe clamp set is chrome plated and muffler hanger clamp and inlet clamp are brushed stainless finish.Order bolt sets separately. Fits:FL 1958-1969Additional Information UOM1 - KIT ...

Chrome front trumpet horn bracket fits Panhead models. Fits:FL 1954-1964 PanheadAdditional Information OEM No.56628-54 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages668

Zinc horn bracket for left side Fits:XL 1952-1984Additional Information OEM No.69031-57 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages1169

Rear chrome crossover header clamp bolts to the rear cylinder base. 1-3/4" inner diameter clamp has tab welded in place. Fits:FL 1962-1964Additional Information OEM No.65510-54 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages651

Parkerized exhaust clamp set includes two piece front pipe clamp and muffler inlet end clamp.Order bolt sets, muffler body clamp, header clamps and rear clamp separately. Fits:FL 1941-1957EL 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin...

This oil filter canister bracket features a zinc finish and is for swingarm models. Fits:FL 1958-1964Additional Information OEM No.63860-58A UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages748

Muffler clamp set includes body clamp and inlet front hanger clamp with parkerized finish.*NOTE: Does not include reinforcement clip. Must order hardware separately. ...

Chrome muffler clamp set includes body clamp and inlet front hanger clamp.*NOTE: Does not include reinforcement clip. Must order hardware separately. Fits:UL 1941-1948FL 1941-1957EL 1941-1952Additional Information UOM1 - SET MeasurementsAdditional...

Includes seat plunger kit, seat "T", and pivot bolt. Fits:XL 1954-1970Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported StyleStock 2025 Catalog Pages822 Tech NoteSuggested to use with #47-0158 Leather Solo Seat.

Chrome auxiliary seat spring kit is for Big Twin rigid frames. Kit is used with seat T bars for all buddy and police style solos.Order the spring clip kit and spring hook separately. ...

Black seat bracket kit includes seat bracket, right and left bracket. Fits:FXE 1966-1984FLH 1958-1984FXR 1982-1983FX 1966-1984FL 1958-1984FX 1980-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported StyleStock

Solo seat hardware mount kit includes nose brackets, springs and rear bracketsUse mount kit for smaller type solos such as K or CH types. Fits:XL 1952-1978Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages1008 ...

Chrome exhaust flange clamp set is allen type. For Panhead models with exhaust ports.These are the 1965 style with 2-barrels to allow tightening to the maximum. Great for restoration on the 1965 Panheads, if you change the allen screw to a hex screw...

Black exhaust support tube mounts drag pipes or stock mufflerrs system to 1958-1979 XL-XLH models Fits:XL 1958-1978Additional Information OEM No.65316-65B UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages942

Black seat plunger kit is to spring mount solo seat on stock frames. Kit includes 4 springs, swivel springs, pin, T bolt , bushing and spacer. Fits:K 1954-1956XL 1957-1970Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA StyleStock 2025...