Heavy cast steel construction top motor mount is unbreakable featuring a zinc plated finish.Thread hole is 5/16" x 18 to mount coil or other accessories, and the distance measures 2" center to center. ...

2023 New Prodcution coil mount bracket kit features a black finish. Kit includes bracket, reinforcement plate, bolt set and coil mount hardware.Order mount stud set seperately. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - KIT ...

Front oil tank mount features a black finish.Mount allows the oil tank to fit close to the top frame rails. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with #40-0640 Swingarm...

Solo seat mount kit for swingarm frame Big Twins.*NOTE: Must order seat separately. Fits:FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported StyleStock 2025 Catalog Pages1241 Replacement Items42-0033 - Chrome 3" Seat...

Front oil tank mount features a black finish.Mount allows the oil tank to fit close to the top frame rails. Fits:FL 1958-1964Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with #40-0640 Swingarm York Oil Tank...

Left side oil tank bracket features a zinc plated finish. Fits:FL 1965-1984FXE 1971-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA

Right side oil tank bracket features a zinc plated finish. Fits:FL 1965-1984FXE 1971-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with #40-0406 Oil Tank with Side FillSuggested to use with #40-1719 Oil...

Solo seat front mount features a black finish.Requires 4 rivets for installation. Fits:FL 1941-1985Additional Information OEM No.32090-25 UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #37-0498 Truss Head Rivets...

Black oil tank mount base plate to attached wrap around tank to frame post.Rear mount installation for swingarm frame oil tank mount bracket. For use with electric start kit and 4 speed models. ...

Auxiliary buddy spring seat kit includes chrome springs, collars with pins, under seat brackets and brackets for frame mounts with the cross rod.Kit fits 1965-1971 FL, but can also be fit to 1968-1984. Fits:FLH 1965-1968FL 1965-1968Additional Information...

Solo seat mount kit includes the nose bracket, springs, rear brackets and hardware. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported StyleStock Replacement Items31-1549 - Stainless Steel Solo Seat Nose...

Top starter mount brace for york electric starter kit and features a parkerized finish. Kit includes seat spring cross suport, seat bracket mount and long rear seat mount tab. For 4 speed models.For securing the starter motor drive engagement on the...

Starter motor support bracket for York electric starter kits to mount the 12 volt starter. Manufactured of cast iron and features a zinc plated finish. For 4 speed models.Bolts to the rear of the transmission plate with 4 holes. For use on York electric...

This kit includes the black "T", shock, and adapter clevis. The mini shock seat post replaces the stock post.Seat tee kit includes mini shock which will support a total weight of 650lbs. ...

Servi-car front muffler clamp features a parkerized finish. Fits:G 1951-1973Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Front oil tank mount bracket. Fits:FL 1965-1985Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with #40-0640 Swingarm Oil Tank Raw.Suggested to use with #31-1777 Rear Oil Tank Mount Bracket.

Black front oil tank mount bracket is for use in lower type frame on the 1958-1962 FL models. Fits:FL 1958-1964Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with #40-0640 Swingarm Oil Tank Raw.

FL type horn bracket features a zinc finish.*NOTE: Mounts FLH Delco horn under front headlamp cowl assembly, bracket bolts to top tree. Fits:FL 1965-1984Additional Information OEM No.69130-65 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog...

This kit includes the black "T" with 5/16" hole and rubber booted 6-1/2" single shock.Shock has external black spring. Fits:G 1936-1973W 1936-1952FL 1941-1980Additional Information UOM1 - KIT MeasurementsAdditional InformationShock Body Diameter:...

XL finned header clamp set is investment cast aluminum with a vibration finish on a shot peen natural surface.*NOTE: Tighten set with 5/16" allen screws that are provided, the front and rear are the same. Both clamps are the same on certain applications...

This kit includes the chrome "T" with 5/16" hole and rubber booted 4" single shock.Shock has external black spring. Pivot bore hole measures 5/16", center to center rear mount holes is 11" and center front mount hole to center rear mount hole is 9". ...

Mini solo seat shock kit includes 4" shocks and two 1" clamps and springs.For use on frames with a 1" cross member on the rear part of the frame. Shock has an alloy body and adjuster ring with a black three piece spring clamp. Peg mount clamp set...

Mini solo seat shock kit includes two 4" shocks, springs and frame clamps for 1" bars.For use on frames with a 1" cross member on the rear part of the frame. Shock has an alloy body and adjuster ring. Additonal hardware may be required for some...

Air shock for solo seat mounting with a single 5/16 x 24 thread on the top and 5/8" x 11 coarse on the bottom. The extended length is 3-1/2" and it's 2" long fully compressed.*WARNING: Always use teflon tape or PTFE thread sealant on air fittings to...

Horseshoe oil tank base features a black finish and is for use on short oil tanks with electric start.Oil tank base fits horseshoe oil tanks that have the raised inner bracket to allow room for electric start motors. Supplied black finish, without...

Stainless steel XL muffler clamp features an inner diameter of 1-7/8" and a reinforced clamp pad area. Clamp features reinforcing pad spot that is welded in place for extra clamping power!*NOTE: Bolts not included. Fits:XL 1962-1970Additional Information...

Replica OEM style tombstone lamp license plate bracket attaches with 3/16" diameter rivets. Constructed from stamped steel and painted gloss black.Excellent reproduction of the OE 68150-49 Guide R-H5 bracket. For use on aftermarket tombstone tail light...

45 inlet muffler end clamp features a black finish. This is a NOS issued Harley Army part. Fits:WL 1936-1951Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA

1" zinc clamp set for early spotlamp. Fits:FL 1941-1957EL 1938-1940Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages1113

Zinc plated horn mount bracket for XLCH models. Fits:XLCH 1965-1985Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA

Black 2 bolt license plate bracket for fender mounting. Fits:FX 1971-1972GL 1955-1972XL 1955-1972Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages1140

Servi-car upper shock bracket set is for the top of the shock and features a parkerized finish. Fits:G 1951-1973Additional Information OEM No.85211-42 UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages816

Ignition coil mount strip set is zinc plated. Fits:G 1937-1947W 1937-1952VL 1930-1936FL 1941-1946EL 1936-1946Additional Information OEM No.31728-30 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages671

Spring Fork front fender bracket set attaches the lower fender brace to the fender for added support and features a raw finish.*NOTE: The brackets are to be riveted in place, not welded. Fits:G 1937-1957W 1937-1952EL 1936-1948FL 1941-1948Additional...

Stainless steel tail lamp bracket for side mount installation on Big Twin models with tin outer primary covers. For use with vertical chrome steel license plate and tail lamp holder. Fits:FL 1941-1964Additional Information UOM1 - EA ManufacturerV-Twin ...

XLCH exhaust mount kit includes clamps and frame support tube and accepts mufflers.Kit includes a chrome front pipe clamp, a stainless steel exhaust header clamp set, a chrome 1-7/8" heavy muffler body and end clamp set, and a black exhaust support tube...

Zinc plated front seat mount plate for solo seat mounting. Accepts seat nose bracket hinge assembly. Mounts with 5/16" bolts. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use...

XL motor mount plate set is constructed of raw steel. Set includes right and left plate set used to incorporate mount ports to accept late model forward controls. Fits:XL 1957-1981Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

Ignition coil and switch bracket features a natural raw finish. Ignition coil and switch bracket mounts the coil and universal key switch in the one-piece bracket.*NOTE: Mount hardware not included. Fits:FL 1958-1984Additional Information UOM1 - EA ...

Generator mount strap is for 32E 6 volt generators. Include a black strap with proper shim, nut, lock, washer and spacer.Restoration quality! Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Type3-Brush ...